How to make a Wet Felt Hat Block

Поделиться
HTML-код
  • Опубликовано: 26 дек 2018
  • How to make your own bespoke hat blocks for wet felting from craft foam. No special tools required, just a carving knife and sandpaper. Time lapse of final shaping and sanding at end of video. Hat size template: mellysews.com/2014/05/sew-hat... Time lapse of final shaping and sanding at 13.06. Search eBay or web for 'blue craft foam' for supplier.
  • ХоббиХобби

Комментарии • 151

  • @isabelladavis1363
    @isabelladavis1363 4 года назад +7

    Very clever , quite a Renaissance Man ,Thank you for sharing your knowledge with us ...truly appreciated

  • @jquach89
    @jquach89 5 лет назад +11

    Excellent and detailed tutorial! (Please, please wear a dust mask while sanding foam, or any material, honestly.)

  • @emschrader418
    @emschrader418 4 года назад +3

    Loved the sped up part. Ludicrous speed! Go!!!

  • @Chill1332
    @Chill1332 Год назад +1

    Wow. This exactly what I was looking for! Thank you so much for this. I have some old felt hats that I want to give a new life.

  • @darenlindley
    @darenlindley 5 лет назад +5

    I am loving your channel! You're tutorials are so practical! I've watched all of your video several times. I cannot wait to start in on my felt hat! Thank you so much! Please, please, please keep making his videos!

    • @donutpanic
      @donutpanic  5 лет назад

      Thank you Daren. I hope you make some great hats!

  • @ruatarengsicolneyrengsi8924
    @ruatarengsicolneyrengsi8924 2 года назад +1

    Really good idea. Thanks for the video.

  • @marksp1532bmwj
    @marksp1532bmwj 2 месяца назад +1

    Thanks for your video. I pick up a lot of felt, straw hats from the Thrift Store from people that have never given them any tender loving care. I have learned with other video how to clean and steam and just recently I have learned how to install a new head liner and to place a new ribbon replacement for the hat. Thanks for the link on hat size to acquire.

  • @bunbunasmr
    @bunbunasmr 3 года назад +1

    OMG a true craft man! Respect!

  • @OZMAX1
    @OZMAX1 2 года назад +1

    you are gifted, thanks alot :)

  • @Dylfunkle
    @Dylfunkle 3 года назад +1

    As many model train enthusiasts will know, a hot wire is fantastic for cutting foam.
    Nice sealed surface left behind, as precise as you'd like, easy to build if you can't buy one.
    Probably isn't fantastic to breathe, but if you have a pedestal fan going you'll live.

    • @donutpanic
      @donutpanic  3 года назад

      If you have a hot wire cutter of course! I'm not sure it would be the best tool for blocks but I will experiment, thanks.

  • @WildernessgalM
    @WildernessgalM 11 месяцев назад +2

    Great idea, thank you so much : )

  • @LorrayneHam
    @LorrayneHam Год назад +1

    Thank you so much for sharing.

  • @vykcryptid
    @vykcryptid Год назад

    awesome video thank you !

  • @donnaporter3989
    @donnaporter3989 3 года назад +4

    You inspired me to make a hat block that fits my husband

    • @donutpanic
      @donutpanic  3 года назад +1

      Being able to make custom sized blocks easily is great. You can also tweak them or reduce the height as required. Have fun!

  • @adhdartist1994
    @adhdartist1994 3 года назад +1

    I have another idea just to keep it the most eco-friendly possible. We could sculpt the shape using paperclay (the most basic home-made one) and when dry. Wrapping it in that kitchen plastic. The amount of plastic needed becomes even smaller.

  • @TepBrown
    @TepBrown 4 года назад +2

    Thank You bunches!!!

    • @donutpanic
      @donutpanic  3 года назад

      You are welcome Stephanie.

  • @sallyjoligocki5011
    @sallyjoligocki5011 2 года назад

    Thank you for the video.

    • @donutpanic
      @donutpanic  2 года назад

      You are welcome. I hope it helps make some great hats!

  • @missioncreekfarm7715
    @missioncreekfarm7715 4 года назад +2

    I've been using an electric carving knife - it works great!

    • @donutpanic
      @donutpanic  4 года назад +2

      Good idea - I'll be sneaking ours out of the kitchen later!

  • @colbypeone1504
    @colbypeone1504 3 года назад +2

    This is gonna help me kick off my business thank you.

  • @semargl9029
    @semargl9029 Год назад +1

    спасибо!

  • @susanerlich9356
    @susanerlich9356 Год назад +2

    Ty 4 showing us a cheaper way

  • @skumbuzomnisi8809
    @skumbuzomnisi8809 5 лет назад +3

    I would like to learn how to make beaver felt hats, any schools you can recommend?

  • @carriedrumheller5286
    @carriedrumheller5286 5 лет назад +5

    Great video! Is the blue foam your using the same as the foam they use as siding insulation? You mentioned a template for sizes, where can I find that?

    • @donutpanic
      @donutpanic  5 лет назад

      Thanks Carrie. If you scroll down to my reply to Greg H there are links about the foam. I downloaded the template from here : mellysews.com/sew-hat/

  • @melaniewilson4142
    @melaniewilson4142 4 года назад +3

    Brilliant !

    • @donutpanic
      @donutpanic  4 года назад +1

      I see you've found your way to the block video!

    • @melaniewilson4142
      @melaniewilson4142 4 года назад

      @@donutpanic I did , I'm not in the US, just a little south of you as it happens ! Next project finding some foam. I think there is a vacuum former at our hack space

    • @donutpanic
      @donutpanic  4 года назад +1

      @@melaniewilson4142 Hi Melanie. I have foam if you need some. If you want vac formed blocks I gave those too. Where are you?

    • @melaniewilson4142
      @melaniewilson4142 4 года назад

      @@donutpanic That would be great is there a way to pm from here ?

  • @jennifercarr1707
    @jennifercarr1707 3 года назад

    This is fantastic, I've got started on mine now! Any thoughts on coating the foam to protect it after it is all finished and sanded?

    • @donutpanic
      @donutpanic  3 года назад

      Hi Jennifer. As long as you have the correct rigid foam there is no need to add any finish. I have blocks that I have used repeatedly with no problem. If you do want to add a finish make sure you test it on a scrap of foam first to ensure it doesn't dissolve it.

  • @wonderwond
    @wonderwond 14 дней назад

    anyone have a link to the blue foam, cant find any thick

  • @frederic4714
    @frederic4714 5 лет назад +2

    Good video buddy :)

  • @kpvw68
    @kpvw68 3 года назад +1

    Greetings from the next shire Mike. I love your videos! Thanks so much. I am currently attempting a block out of a white polystyrene cake block, it's messy in the extreme! Fun though. I'm trying to make one to help me make a 1920's cloche hat and wondered if there was an average height for blocks? thanks again

    • @donutpanic
      @donutpanic  3 года назад +1

      Thank for the comment. White packaging type polystyrene is quite different and as you say, messy if you try this. The blue (or now grey) stuff is as you can see carving and sanding friendly. Blocks will vary in height, but 5" would be average for a Trilby or Fedora. Let me know how you get on!

    • @donutpanic
      @donutpanic  3 года назад

      I seem to have deleted your further reply - sorry! I am used to working with wood, have lots if kit but making wooden blocks is still laborious. I also make ABS plastic vacuum formed blocks but again, making various sizes and styles is a pain. The rigid foam is the way to go. Where are you based?

    • @kpvw68
      @kpvw68 3 года назад

      @@donutpanic I'm in the Belper area of Derbyshire

  • @littlebrookreader949
    @littlebrookreader949 3 месяца назад +1

    👍👍

  • @SMSBen
    @SMSBen 3 года назад +1

    Mr. Mike
    I read in school and my next holiday project is to "make a waterproof cowboy hat". Can you suggest something about that?
    By the way, love your tutorial.

    • @donutpanic
      @donutpanic  3 года назад +1

      Thank you for your comment. Dense, well worked felt repels water very well, but will eventually become wet. You can coat with a waterproofing spray such as Scotchguard to make it more water repellent. I wear a wet-felted Fedora in all weathers and it keeps my head dry! Good luck with your project.

  • @maryannjordan317
    @maryannjordan317 2 года назад +1

    Hannah, I am wondering if you can use floral foam? Floral supply shops and craft ships seek the foam for both wet (fresh flowers) and dry (silk flowers).

    • @donutpanic
      @donutpanic  2 года назад +1

      No. Floral foam is soft and crumbly. This is extruded polystyrene and totally different.

  • @shopculturecore2452
    @shopculturecore2452 Год назад +1

    Mike could you post where you buy your ABS molds from and also your craft foam.

    • @donutpanic
      @donutpanic  Год назад +1

      Foam is from Panel Systems, UK. There are answers below and in my other videos for supply in the USA (I'm guessing that's where you are). I vac form my own ABS blocks. Search for 'Hatshapers' in the USA.

  • @OfficialJeffAnderson
    @OfficialJeffAnderson Год назад +1

    Hi Mike! I recently purchased some XPS and am about to begin shaping my crowns. My plan is to make a variety of rabbit and beaver fur felt hats. My questions are: will the crown blocks hold up to the heat from the steam needed to form the felt and will the blocks get damaged from using a Blockers Cord & Pusher Downer?
    Much appreciated!

    • @donutpanic
      @donutpanic  Год назад

      The foam blocks hold up well in repeated use for wet felting (from loose fibre) which is what I use them for. I have not tried using pre-made hoods on the foam blocks. Let me know how it goes- good luck!

  • @dfalekulo9138
    @dfalekulo9138 2 года назад +1

    Any link to purchase in the UK? Tried the extruded polystyrene xps search but can't find exactly what I need as a consumer

    • @donutpanic
      @donutpanic  2 года назад +1

      Scroll down to my reply to Becah for a link. I buy mine from Panel Systems.

  • @Idasbus1
    @Idasbus1 4 года назад +2

    I would love to have a tutorial on how to make a wooden hat block 🤓 please...🌸🌸🌸

    • @donutpanic
      @donutpanic  4 года назад +1

      I have made wooden blocks but they are not ideal for wet felting. I prefer the foam blocks, or abs vacuum formed blocks. If you have the tools and equipment to make a wooden block, you could probably already do it!
      ruclips.net/video/XI4_akHmpzc/видео.html
      ruclips.net/video/BxHJk03Uvqg/видео.html

    • @Idasbus1
      @Idasbus1 4 года назад

      Wooden blocks look realy nice do 😉 Does the foam stands the pressure when you put on it while wet felting? I meen, I put my weight on it 🥴😂 dont it brake or crack?

    • @donutpanic
      @donutpanic  4 года назад +1

      @@Idasbus1 It is a rigid foam, not packaging polystyrene. It is fine. If you want something you can stand on the abs vac formed blocks are what you want. With the foam blocks you can make any size or style you need using the most basic of tools.
      ruclips.net/video/aWe8FM8tgpw/видео.html

  • @KidCalavera
    @KidCalavera Год назад +2

    Hi Mike, awesome video, I've never worked with blue craft foam, would this work as a wood block for traditional non-wet hat making?

    • @donutpanic
      @donutpanic  Год назад +1

      It may do, but I think if you really have to pull you might deform the foam, although it is quite tough.

    • @KidCalavera
      @KidCalavera Год назад +1

      @@donutpanic I understand, maybe I can use the foam ones covered with some sort of hard plastic coat

    • @donutpanic
      @donutpanic  Год назад +1

      @@KidCalavera I'd try it as it is first. It's pretty tough stuff.

  • @phuongvaughan-nguyen6534
    @phuongvaughan-nguyen6534 2 года назад

    I love your video, brilliant ... Where did you buy the hat block in plastic? I live in Paris.
    Thank you again. Phuong Vaughan

    • @donutpanic
      @donutpanic  2 года назад +1

      Hi. It is extruded polystyrene. It is used for modelling, but primarily for insulating, so you may find it from an insulation supplier in sheet form. I get mine from here: www.panelsystems.co.uk/product/styrofoam-ravatherm-xps
      I look forward to seeing some stylish Parisian hats!

  • @liverbird46
    @liverbird46 8 месяцев назад +1

    Just what I need. Thank you. Is that material just called craft foam or does it have another name?

    • @donutpanic
      @donutpanic  8 месяцев назад

      It is extruded polystyrene, or xps. Widely used as insulation as well as crafting and modelling. www.panelsystems.co.uk/product/craftfoam-grey

  • @yuleedwards1495
    @yuleedwards1495 3 года назад

    This is fantastic, thank you. What grade of sandpaper do you use?

    • @donutpanic
      @donutpanic  3 года назад +1

      Around 120 I think. Too course and it causes tear-out.

    • @yuleedwards1495
      @yuleedwards1495 3 года назад +1

      @@donutpanic Good tip, thank you. And thanks for sharing your skill so generously.

  • @EnDabuwya
    @EnDabuwya Год назад

    Do you glue multiple sheets together? I can't find any xps/craft foam thicker than 75mm

    • @donutpanic
      @donutpanic  Год назад

      No, the sheets are 150 mm thick. You could glue two (or more) 75 mm sheets together though. Where are you?

  • @R8TD-M
    @R8TD-M Год назад +1

    Good day Sir, are these blocks for shaping of the fedoras only or can they be shaped for long oval heads? Because I'm a long oval, store bought fedoras don't always fit? I need something permanent when purchasing custom fedoras. I'm willing to pay for one of the foam blocks if this is feasible 😊. Not crafty as you are...LOL.

    • @donutpanic
      @donutpanic  Год назад +3

      Good day to you, Kevin. I use the foam blocks for making wet felt hats from scratch using loose wool fibre rather than blocking or reblocking commercial hoods or hats. They can be made to any shape. I wonder if a hat stretcher might be a better solution for you?

  • @Hi5_YOGA
    @Hi5_YOGA 2 года назад

    Hi there, how do you seal the bodies after so they are heat & pressure resilient ?

    • @donutpanic
      @donutpanic  2 года назад +1

      The blocks are for wet felting. They are perfectly resilient for the intended purpose, using hot, sometimes near boiling, water.

  • @billpenrod3460
    @billpenrod3460 5 месяцев назад

    Hello, I'm having a hard time in the states finding the blue foam. Can you share a link to where I may purchase some?

  • @tybaltmoon2082
    @tybaltmoon2082 5 лет назад +1

    How much room do you have to leave for the sweat band?

    • @donutpanic
      @donutpanic  5 лет назад +1

      I don't think felt making is that exact a science! I make a band that fits my head and then sew it in - the felt will give enough if required. Otherwise, simply measure your head with the band held in place for an exact size.

    • @tybaltmoon2082
      @tybaltmoon2082 5 лет назад

      @@donutpanic thank you! Love your videos. Will try it out soon.

  • @picturesteve398
    @picturesteve398 2 года назад

    Hi Mike thanks for the video! Have you ever tried to enlarge a hat from one size to another? How would you do something like that? Would i need wood to do that? Thanks

    • @donutpanic
      @donutpanic  2 года назад +1

      Hi Steven. My videos are about making wet felted hats starting from the raw fibre, so are blocked as part of the felting process rather than blocking a commercial pre made hood. However, to resize an existing hat, I would remove the sweat band and hat band, stretch the felt body, and refit a correctly sized sweatband and hat band - it is these that keep the size and stop the hat body from stretching in use. An exact size block would be ideal, but might be hard to come by or make.

    • @picturesteve398
      @picturesteve398 2 года назад

      @@donutpanic Thanks for your reply. I just wondered what your advice was for changing a hat size. it's a custom hat 100% beaver, if that makes a difference. I was gonna try to use the xps block to change the size but I was concerned maybe it's not strong enough. thanks

    • @donutpanic
      @donutpanic  2 года назад

      @@picturesteve398 resizing your hat is quite far removed from wet felting, which is very different from blocking a pre made felt hat body, so I can't really advise.

    • @pamelapruitt2558
      @pamelapruitt2558 Год назад

      You can buy hat stretchers online. How well they work, I cannot say.

    • @cariadlondon
      @cariadlondon 9 месяцев назад

      To make a block larger, cover in clingfilm. block a piece of felt on it then measure. If not large enough, block another felt over that. I don't think it works with more than two layers of felt.

  • @michaelwiff2576
    @michaelwiff2576 Год назад +1

    As the saying goes, "Work smarter, not harder."

  • @Chill1332
    @Chill1332 Год назад

    So....question. Can you use it just like that? Glued foam with no sealant? Or do you have to do anything to it after this stage?

    • @donutpanic
      @donutpanic  Год назад +1

      Yes just as is, no further treatment. I've just re-blocked my daily worn, three year old hat on the block I used to make it originally.

    • @Chill1332
      @Chill1332 Год назад +1

      @@donutpanic Sweet! Thanks so much! I'm trying to reshape a rather floppy, felt hat into a short Top hat with a better fit. I hope it works. :)

    • @donutpanic
      @donutpanic  Год назад +1

      @Chilly Studios Do bear in mind that I am wet felting, going from loose fibre to finished felt, rather than pulling a pre-made hood (or in your case an existing hat) into shape. Regarding the floppyness, have a look at my stiffening with shellac video.

  • @vintage848
    @vintage848 Год назад

    hello mike
    Thank you for this very important video
    I wanted to ask please
    Ifa, I can buy
    Quality felt fabric
    to make a hat
    I would love a link to a store that sells these fabrics
    And one more question please.
    Ifa, you can buy the device that cuts the brim of the hat
    I saw some videos of hat makers on RUclips
    who use a wooden handle with a knife
    You can adjust the measurements to cut the brim of the hat
    Thank you and have a nice day

    • @donutpanic
      @donutpanic  Год назад +1

      Hi. My videos cover wet felting, so you start with loose fibre and make the felt as part of the process rather than buy it. You can buy pre made felt hoods to shape on a block. You can buy brim cutters although I use a pair of scissors.

    • @vintage848
      @vintage848 Год назад

      @@donutpanic Hi Mike thanks for the quick reply
      I'm not yet at the stage of making the fabric myself
      Ifa, can I buy fabric by myself ready for design?
      I searched online
      I did not find such a store
      I would appreciate it if you could give me a link to a store that sells the fabric alone for the design
      Thank you very much

    • @donutpanic
      @donutpanic  Год назад

      @@vintage848 search for 'wool felt hoods for hat making'.

  • @neldefranca761
    @neldefranca761 2 года назад

    Went to melly sews can’t find template for blocks- could you attach the link for the template

    • @donutpanic
      @donutpanic  2 года назад +1

      I sesrched for hat template and this comes up. mellysews.com/wp-content/uploads/2014/05/HatTemplate.pdf

    • @cariadlondon
      @cariadlondon 9 месяцев назад

      Thank you, I asked this. X

  • @gregh3144
    @gregh3144 5 лет назад +1

    I can’t seem to find any such foam in my internet searches, can you elaborate further what else the product is sold as. Thanks, insightful video. I can’t wait to get to sculpting.

    • @donutpanic
      @donutpanic  5 лет назад

      This is the product I use: www.panelsystems.co.uk/product/craftfoam-blue. Also known as Extruded Polystyrene (XPS). If you are in US have a look at the comments to this video ruclips.net/video/LNVDH7C8OIU/видео.html

  • @joaozemsta
    @joaozemsta Год назад +1

    Hi from Brazil!
    What height for fedora block?

    • @donutpanic
      @donutpanic  Год назад

      Olá! The foam starts 150 mm thick. The crown on this one was 125 mm high.

    • @joaozemsta
      @joaozemsta Год назад

      @@donutpanic and is it the same height for all head sizes?

    • @donutpanic
      @donutpanic  Год назад

      @João Bartowski Down to personal choice I suppose. For most styles I find 150 mm roo tall. The beauty of the foam blocks is that you can trim them down and re-block if it looks wrong. If it were a very small hat size, then I suppose the height should change in proportion.

  • @Badoura
    @Badoura Год назад

    hi there - desperately trying to find a specific shape of brimless hat like an upside-down fez - I can't find a name for it - I've searched for Babouska, cossack, high top pill box, flat top crown - to no avail so have popped on to good old youtube in the hope that someone like is out there and I can learn how to make my own hat block but I simply can't find the 'blue craft foam' - I'm finding floral foam and medium density polystyrene - is there any chance you can add a link here - a demented Scottish 'mother-of-the bride' who has fallen in love with a hat that doesn't apparently exist!!! ...

    • @donutpanic
      @donutpanic  Год назад

      www.panelsystems.co.uk/products/modelling-foam
      Sounds like you'll need to make a puzzle block that you can dismantle to remove.

    • @Badoura
      @Badoura Год назад

      @@donutpanic thank you for your prompt reply - I am thinking that I would just cut it off the block or cut out the foam (now that I found you) there's going to be tulle or lace wrapped around so I'm thinking the seam will be disguised - I'm not a hat maker but if I can't find what I want off the peg or someone to make or if it's just not worth the cost I generally end up making it myself - thanks again though you're life saver!!!

  • @JohnnyRebWasATexan
    @JohnnyRebWasATexan 2 года назад +1

    "A-lum-i-num" there is only one I.
    Just a "crack". I always joke with my Irish friend who says aluminum the same way. Thanks for making this video! Its was great!

    • @donutpanic
      @donutpanic  2 года назад +1

      You'll be telling me next that there is no 'u' in colour!

    • @JohnnyRebWasATexan
      @JohnnyRebWasATexan 2 года назад +1

      @@donutpanicThat's a good one. HaHa! Oh no not at all! There is a U in color...the only thing is, here in the States we do not "U's" it. Haha. Have a good day Mike. I enjoyed your video. I am now in the search for big blocks of blue craft foam.

  • @rebecahgokee7815
    @rebecahgokee7815 3 года назад +2

    Hi Mike! I’ve search on eBay for a blue craft foam blocks and the only results either come in different dimensions or different types of foam. If you by chance see this, could you perhaps write me a link to your supplier?

    • @donutpanic
      @donutpanic  3 года назад

      Hi Becah. UK supplier below. Where are you?
      www.panelsystems.co.uk/product/styrofoam-ravatherm-xps

    • @LABELLEPLUIE
      @LABELLEPLUIE 3 года назад

      @@donutpanic I am from canada and I am also looking for foam blocks. On your link the blocks only go up to 118 mm thikness wich is only 4,6 inches.

    • @donutpanic
      @donutpanic  3 года назад +1

      @@LABELLEPLUIE Hello Aurelie. The foam I buy is 150 mm ( 6" ) thick, which is more than thick enough for all the blocks I have made so far. It can be glued together if required. If you look at the comments in this or my other block videos you should find information and links that should help you source the material locally.

    • @LABELLEPLUIE
      @LABELLEPLUIE 3 года назад

      @@donutpanic Thank you for your reply Mike! Ive found someone that supplies blocks in Canada, more expensice then I expected but I can make at least 2 blocks with it. Also Do you need a different block for every size?

    • @donutpanic
      @donutpanic  3 года назад +1

      @@LABELLEPLUIE Keep looking - I'm sure you will find a reasonably priced supplier of insulation rather than model making. Have a look at the link to the UK supplier in my reply to Becah above for comparison. The point being that you can make different sizes relatively easily and inexpensively with the rigid foam as opposed to wooden or ABS blocks. It also allows you to easily adjust the size or style if the hat is not quite right and then rework the hat. I have reduced the height of a couple blocks while in progress. A hat that really fits is worth the effort!

  • @jadearthur9565
    @jadearthur9565 3 года назад

    How tall should they be?

    • @donutpanic
      @donutpanic  3 года назад +2

      Hi Jade. Measure a hat that you like and make it that high. 125 to 150 mm is about right for me. Thank you.

  • @lukeyoung3421
    @lukeyoung3421 3 года назад

    What’s the exact measurements for your foam Sheets/Blocks

    • @donutpanic
      @donutpanic  3 года назад +1

      Hi Luke. The sheets I have are 150 mm thick. Info about sizes are in the video.

    • @lukeyoung3421
      @lukeyoung3421 3 года назад +1

      Loved the video but wanted to be sure how thick your block was....I’ve been making hats for quite some time and just stumbled across your video and blown away by the fact that I’ll no longer be dropping crazy amounts of money on wood blocks. Thanks!

    • @donutpanic
      @donutpanic  3 года назад

      @@lukeyoung3421 150 mm is more than enough, or you can glue it with PVA if you only have thinner sheets.

    • @lukeyoung3421
      @lukeyoung3421 3 года назад

      @@donutpanic gonna check the hobby lobby and see if they have any local. Most of the blue craft foam I’m finding is across the pond and not really wanting to wait for it haha. I appreciate it man definitely earned a like and follower.

    • @lukeyoung3421
      @lukeyoung3421 3 года назад

      @@donutpanic do you happen to have a link to the foam you buy. I’m having a heck of a time trying to find anything similar. Really the only thing I can find is the regular crappy white foam that breaks apart

  • @rbishop12399
    @rbishop12399 4 года назад +1

    what is the height measurement of the block you are using there ?

    • @donutpanic
      @donutpanic  4 года назад +1

      Hi Rusty. I've just measured my dog walking Fedora, which has a crown height of five inches before shaping. The blue foam starts at 150 mm (6") thick, so you can make any height block up to that. Hope that helps!

    • @rbishop12399
      @rbishop12399 4 года назад

      donutpanic thank you!

  • @simsimma4940
    @simsimma4940 4 года назад

    Hi was enquiring about hat making and was told Nottingham is the place to be .do u du classes?

    • @donutpanic
      @donutpanic  4 года назад +1

      Hi Simone. No classes I'm afraid. Hopefully the videos will help. If you have any questions just ask.

  • @deadeyeskunk269
    @deadeyeskunk269 Год назад

    For those having a hard time finding this crafting foam in the US, I live in California and this and many other progressive states have banned this material. Its very difficult to find and mostly 1/4 inch sheets with paper for house insulation. The quest continues because wood blocks are not economic for me.

    • @donutpanic
      @donutpanic  Год назад

      You may be right but a Google search for "Extruded polystyrene insulation California" seems to bring up several results. I hope you find some - good luck!

    • @deadeyeskunk269
      @deadeyeskunk269 Год назад

      @@donutpanic ah yes i see there are unfaced versions of insulation type. Its green but hopefully thats the same material.
      Another place i saw offered 2-8 lb weight but not sure which you're using.
      Thank you for taking the time to reply. I thought i would have to make one out of expanding foam like another tutorial used.

    • @donutpanic
      @donutpanic  Год назад +1

      @UCTkYN547lLAJbZb0j1TprUw current price here in UK is £128 for a box of two pieces 6" thick, 4' long, 2' wide. Sounds a lot but it makes a lot of blocks if you can justify it. It's now branded as 'Ravatherm XPS' here un UK. I don't think there are variations in density. Remember it is Extruded not expanded polystyrene that you need. The legislation looks to be going after packaging rather than insulation materials.

    • @deadeyeskunk269
      @deadeyeskunk269 Год назад

      @@donutpanic All I could find is a product called Foamular. It says extruded (Next Generation Extruded) but its pink. Do you believe this will suffice? Thank you again for your guidance
      I came to the store to see the material and it seems a little squishy. Does your blue foam get dented if you press on it?

    • @donutpanic
      @donutpanic  Год назад +1

      @@deadeyeskunk269 I think I know the stuff you mean - no that's not it.