how to replace and repair a power window regulator in a 2003 bmw 525i
HTML-код
- Опубликовано: 8 апр 2017
- In this episode of how to be a man I go over how to repair and replace a power window regulator / mototr in a 2003 bmw 525i. you have to take off the panel, air bag, speakers. etc. it isn't hard, it just takes time.
Хобби
Thank you. Had replaced a window regulator and motor on a late 90s QX4. This looks like a bit more. Now a 2006 BMW 525i. Daughter and grandchildren tell me BMW’s are notorious for this issue. Will give it a shot as it’s a back window. Worse case can’t fix it and maybe labor will be cheaper.
I don't recommend replacing this with used parts, as these things break down way more often than you think. The weak spot is a tiny weld on the wire that breaks, requiring replacement of the whole assembly. You can buy a new replacement from dozens of different online places. Just don't buy it from the $tealer. As for the air bag code, it shouldn't send a code if you first disconnect the battery, as you should with all repairs involving electrics. You also really don't need to disconnect the air wires at all. Just find some scrap wire to hang the unit on the door without unplugging it.
Thank you so much. your posting is very helpful for me. From Seoul ~
My dad taught me how to fix a lot of stuff, but he doesn't know shit about taking care of a car. Consequently, I don't know anything about working on cars either. Thank you for helping me be a more complete man.
So I changed out the regulator no problem bit now the window will not close all the way. How do I fix that? Currently closes 3/4's of the way
just wow, Thank you Dr. great vid!
cool video!!! good job Will!!
thanks a lot for this video it helps me so much
Bosch cordless screwdriver would be a good idea. Also I generally do not unplug the airbag, I just move the moisture barrier and leave the airbag where it is. If you unplug it (even if you disconnect the battery) you might need a BMW airbag reset tool, not too expensive.
Is this the same process for rear windows? Also my front window makes a squeaking sound when i use it, does anyone know what thats from?
What tool did you use to reset the abs light?
Great instruction. Thank you!
God bless ya, Will!
Bless Thanks 😊 Got to do the same job on a 525i 2005.
need try this on my sons 2002 bmw 530 thanks! hope it works
very good
No power/noise whatsoever when I press drivers side window switch do I need a the same part?
dont know. could be a fuse, wiring, dead motor, switch, etc.
👍👍
tank you
Is there a trick to getting the regulator to release tension if window is completely up, and some of bolts cant be reached, and you're in junkyard and no battery in car?
Usually the junkyard stuff should have a battery for rent, even a smaller 12v one. Ask at the entrance
Is it possible to just leave the airbag connected to avoid having to buy a tool and reset?
disconnect your battery first but youll have to fuck with rolling the window up and down
Yea, I just left it hanging off the top bolt and worked around it.
@@NYyankeeboi thanks for da tip
Yeah takes time very fiddly to do I allowed a day ,but didnt need it, bought an aftermarket window
regulator didnt work properly ,so went to a wreckers and got one off a dead BMW E39 works perfect .
I simply do not have the patience for this.. I hate to say it, but I would save up the money and take it to the dealership to be ripped off.. I feel better getting ripped off..
You suck
It's not really that bad, just do your research and be careful when doing it. If you're going to own a BMW you should know how to do maintenance things like this.
It's not that bad at all. This guy adds unnecessary steps, making it harder than it is. You don't need to remove the airbag or the full vapor barrier.
just a piece of advice to throw out there for everyone, they also make software that comes with a disk and a USB to OBD2 cable. if you have a laptop and don't want to buy a special reader. I think I paid like 30 bucks for mine.
shit I might have to get one.
What is the name of the software please
SHOW YOU PUTTING THE GLASS IN I CANNOT GET IT RIGHT AND YOU DO NOT SHOW IT!