Xiaomi scooter 1S BLE157 downgrade using stlink
HTML-код
- Опубликовано: 2 авг 2024
- In this video, I will downgrade the blocked BLE version using stlink.
Link to software and drivers: github.com/VooDooShamane/MiDu...
MiDu-Flasher V1.0.5 github.com/VooDooShamane/MiDu...
RollerPlausch.com
German forum with the VooDooShamane hacking guide (use google translate ;) )
rollerplausch.com/threads/mid...
RollerPlausch.com - youtube channel, has a lot of interesting hacking videos:
/ @rollerplausch
Head swap method to bypass BLE157: • Xiaomi Scooter 1S BLE1...
Flashing without soldering (risky but possible): • Flashing BLE157 with S...
How to flash bricked ESC: • Flashing Xiaomi electr...
Amazon affiliate links:
St-Link_v2 Adapter amzn.to/3uKSH4w
Soldering Iron Kit amzn.to/3pJzNLA
Single Row Male Pin amzn.to/3IBlApl
No Clean Flux&Desoldering Braid amzn.to/3z4LkaQ
Isopropanol IPA 99.9% - Cleaning Alcohol amzn.to/3PlsNMw
Music that plays in the video:
Pathway Home by Roa / roa_music1031
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3NJf556
Music promoted by Audio Library • Pathway Home - Roa (No... Наука
Hello, just did the no soldering because i didn't want to go to work for it, and well everything worked. So thank you very much
Muito Bom seu tutorial , muito bem explicado ! congratulações ! Meu scooter Xiaomi essential deu Bug após uma atualização errada e a Dashboard não ligava mais, somente piscava a luz de freio quando apertava o botão power. Mesmo assim consegui realizar o downgrade , sem precisar realizar soldas, mas utilizando fios de metais de pacotes de pães. Consegui na segunda tentativa graças ao excelente video e as excelentes explicações .Você me fez economizar 60 euros . Muito obrigado . From italy
Que bom que foi útil. Não se esqueça de se inscrever, obrigado :)
Seriously, I did this thanks to your tutorial! But without soldering. Thank you so much 🙏🙏
Cool :)
can i use this on xiaomi scooter 4 go
@@MindaugasJocionis
Thank you for this tutorial, my scooter just hit 2000km, so as a reward i downgraded ble so i could flash custom firmware. No soldering required, took a couple of attempts but now my scooter has a new lease of life. Appreciate this tutorial.
Nice work! Don't forget to subscribe, thanks :)
Great guide, many thanks!! It helped very much in 1s firmware downgrade
Just a few notes from my experience (maybe helpful for others):
1) From MiDu flasher I was not able to automatically download BLE and Bootloader firwmare, but I just had to manually download them from the links provided by MiDu, rename donwloaded files according to names indicated by MiDu, and paste them in the folder required.
2) At first I tried to solder the STLINK wires to the board, but MiDu was not able to establish the connection (and I also did a little damage to the scooter screen) -> this was because I made bad soldering (which I found harder than I thought)
3) So I ended up trying the "no solder way" and, after a few attempts, I succesfully established the connection and updated the firmware -> so I consider this solution even "safer" if you are not so used to solder :D
Thanks for the feedback and for sharing your experience.
And don't forget to subscribe, thanks :)
so this just flaseha the ble to a version lower than the 157? my references are,1.1.0_248_157_141. I'm waiting for the stlink. In the microcontroller option I have to choose the one above since my board is the orginial no and once finished this flasehar completely with the DonwG to reinstall everything complete in the version of drive bms and ble that I want via bluetooth?
HOW DID IT WENT?
Thank you very much bro, love from Greece 🇬🇷!!
Thanks for watching, don't forget to subscribe :) 🇱🇹
I do everything, remove and C2 but still not get connections . Same STL i use for repair bricked ESC. Checked all 10 times not error in my cables but not connections on 1S :(
You're a ⭐️ I just can't wait to receive the st-link and I do all this! Danke Schoen!😜
Cool, don't forget to subscribe :)
Worked like a charm. Used a very thin wire (0,5 mm) which was easy to solder on the pads. Also used my glue gun to glue the wires down at the edge and that made it easy to remove afterwards. Subscribed.
Nicely done :)
Thank you so much for the tutorial. I managed to downgrade BLE. I want to change scooter configuration using SHU to adjust cruise control activation timer.
Taip, shu geras pasirinkimas as taippat ja naudojuosi.
My stlink cables didn't come with an end that has pins. My cables have holes to be plugged into something on both sides, as if I'd connect them between two stlinks. What can I do?
Cut a paper clip or something similar made from metal, or buy those pins in any local electronic DIY shop. Subscribe, thanks.
Would this method also work on a segway ninebot G30LD? Assuming I flash it with ninebot software of course. The dashboard chip is the same, all the numbers match on the chip as well. All I could find about the G30LD is people soldering straight to the speed controller, which requires a lot of disassembly.
Sveikas Ignai, kaip suprantu tu lietuvis. Nieko nzn apie segway, bet pabandyk paklaust sitam telegram kanale, yra ten keli bicai kur uzsiima flesinimu profesionaliai t.me/scooterhackingchat
Jei neatsakys iskarto, pakartok vis laikas nuo laiko, nes nevisada ten visi sedi o chatas gana greit sukasi.
As tai zinai, turiu kelis scooterius, jei iskyla problema isprendziu ir imetu vide, o seip daug patirties neturiu :)
Sub. Aciu.
Great guide, it worked perfectly on my Xiaomi pro 2. Excellent work, thanks
Glad that it was helpful :) Subscribe, thanks.
¿Después de flasehar, ya tenía el BLE Y, DRV TODO INSTALADOo después tienes que flasehar con donwg?
@@MindaugasJocionis Hey man, great video! Gonna do this on saturday for my Xiaomi Pro 2. Quick question... at 8:22 you say the top one is the original dashboard. What do you mean by that? Original from this scooter or is that the original one I need? In other words, do I choose the first one, or the second one? Thanks!
@@nikostevens1 Original means the dashboard from xiaomi. Nonoriginal (clone from aliexpress etc.).
Good luck with flashing, and don't forget to subscribe, thanks :)
where did you find this ftlink ?
What is the micro controller for the xiaomi pro 2?
Does this work on pro 2? Produced july 2021, esc firmware 252, ble 158 and bms 141.
Thanks!!!! Worked perfectly on a pro 2
Glad it was helpful, don't forget to subscribe, thanks.
Brother you still have the file?
Please send it to me because it’s not available now I can’t download it
8:24 Is it always the top model if you never change your dashboard and it is original ?
Or how to know what dashboard model do i have?
Yes, always top. Subscribe, thanks.
for mi m3655 shoud i use write flash or dump flash?
Hi I tried modding my xiaomi essential to make it go faster but now all it says is error 27 control code error, I looked it up and it says that I have to change the motherboard, is there any other way I can solve it? like with the st link?
Probably your ESC board is 3.1 with a new microcontroller (you needed a different type of DRV). You can recover your mainboard (ESC) with the stlink.
Try asking this telegram chat group for help: t.me/scooterhackingchat
Or this guy, he has recovery tools for ESC board: t.me/STLink_XAP2P
Subscribe thanks.
Hey I got a problem. I did every think whats in this video and when
Im trying to downgrade my scooter ( pro 2 ) it says error no connection, adapter speed= 1000 or 400 or 100. Do you have any solution for this?
Poor soldering or incorrectly connected wires to stlink. Subscribe, thanks.
I have a question regarding the serial protocol used by the USB ST-link
What protocol does it use for communication:
UART
I2C
SPI
CAN
GPIO
I believe it uses SWD/JTAG debug protocol
and GPIO communication interface
I'm not sure that I'm correct if you are really interested in this you can ask VooDooShamane at rollerplausch.com/threads/midu-flasher-st-link-downgrade-unbrick.5399/ forum.
Hi, can I use this software when connected directly on ESC? Because I dont have serial number, scooter is bricked and no sticker on outside...
No, this is currently only for ble unless a new version is out.
Take a look at this telegram chat t.me/scooterhackingchat there are many serials in pictures.
Maybe a random number after the model number would work too, haven't tried it.
Subscrine, thanks.
Hej, chcę zrobić downgrade tą metodą ale hulajnogi ninebot g30 max, nie wiem jednak, które kolory gdzie połączyć gdyż płytka wygląda nieco inaczej, masz wiedzę czy jest to do zrobienia? 🙏
Very good guide , compliment!! , it’s so accurate
Thank you, don't forget to subscribe :)
Ι can make the same with ble 158?
Worked like a charm on Pro2 Downgrade 👍👍
Cool. Subscribe, thanks.
@@MindaugasJocionis Already Done Thank you
what is the order of dots on the 3.2 v plate from top to bottom, and you have to lock the skate to flahse it? Thank you.
It's same board revision, so order is the same. Lock is needed, as without lock scooter will shut down automatically and cut board power.
Thanks. 👍
what to do if i didnt lock it, can i save it?
Hello !
I have a mi pro 2 with:
BLE 1.5.7
DRV 2.4.8
BMS 1.4.1 and i have the new 3.1 controller...
so it is possible for me to downgrade BLE without bricking?
and if yes, what kind of (speed) modifications can i do with the new Controller? i would be thankful for an aswer!
You can downgrade BLE regardless of your ESC controller (they are on different boards and use separate firmware).
As long as you have ESC3.1 you need a different DRV than those old ones, otherwise, you will brick your ESC board.
Here you can build a new DRV by yourself:
rollerplausch.com/threads/neuer-controller-v3-1-bei-aktuellen-xiaomi-rollern-brickgefahr-bei-drv-downgrade-vorgehen.5187/page-6#post-67651
Check this telegram chat, here you can find prebuilt DRV for new controller 3.1 t.me/STLink_XAP2P
t.me/STLink_XAP2P/34
Subscribe, thanks.
Hi, I have followed all your steps in the video and at the end of installing in keeps saying "blt-id not found"
Do you know what is wrong, thanks.
I have no idea, try asking in this Telegram chat group t.me/scooterhackingchat
or in this forum rollerplausch.com/threads/midu-flasher-st-link-downgrade-unbrick.5399/
Subscribe, thanks.
Hi dude, i did everyting as in your video, after downgrading process, i cannot connect to my scooter through bluetooth, scooter hacking utility is stuck at "Pinging scooter" step, and original xiaomi app is connecting and disconnecting after 1 sec. Is My bluetooth dead?
No, kill all apps on android and re-enable bt connection. Or restart your smartphone.
To connect to mihome, you need to remove your scooter from the app and connect again like the first time. (this happens every time you use a third party app). Subscribe, thanks.
i did this without soldering! Worked perfect! Thank you :)
Nice, subscribe, thanks.
But how
@@abrarahmed6728 ruclips.net/video/NYxrvGhevwg/видео.html
Hola, Tengo un Xiaomi Pro 2 y he conseguido siguiendo el tutorial realizar el downgrade correctamente. Quería agradecer con un Like y un comentario el esfuerzo por realizar este video, muchas gracias. 😀
👌
Me alegro de que el video haya sido útil y hayas bajado de categoría con éxito. No olvides suscribirte, gracias :)
Hola a que ble se degrada?
@@catita790 La aplicación descargará automáticamente la versión requerida de BLE
Suscríbete, gracias :)
@@catita790 ya no me acuerdo exactamente pero creo recordar que a la 126 y de ahi ya puedes volver a bajar normalmente mediante down g a la BLE 75 de camible
Today I recive st link from china and i do everything step by step and everything work fine . I Just want to say that the wiring for my st link was deferent from yours and it take 15 error to connect but everything work fine
So thank you very much my friend
🎉🎉🎉🎉❤❤❤
Don't forget to subscribe, thanks.
@@MindaugasJocionis yes i did before
hey i flashed 2 scooter one xiaomi pro 2 nordic and one xiaomi 1s nordic .1s .
i changed display to earlier than BLE 157 and i flashed both is hacked and driving fast works good but both when i turn they of they start by them self and they are not possible to turn of by them self please can you tell what i have done or what i should do to fix this ?
Did you check your ESCversion?
You can check your ESC by the app: "m365 downG " look in the UUID under Tools. If the UUID does not contain FF characters, it is the new controller.
If the UUID contains the characters FF , it is the old controller.
I think you have that 3rd version and need a different DRV.
Ask in this forum, there is a link to a web builder for the 3.1 controllers DRV, you must build it by yourself. rollerplausch.com/threads/neuer-controller-v3-1-bei-aktuellen-xiaomi-rollern-brickgefahr-bei-drv-downgrade-vorgehen.5187/page-6#post-67651
Or ask for help in this telegram chat, this guy has already prebuilt DRV's for the 3.1 controllers.
t.me/STLink_XAP2P
"Scooter hacking utility" is working for support for 3.1 controllers as well, but still it's a work in progress.
Subscribe, thanks.
Tengo el pro2, con 157, 248, 141. ESC ver 3, hice el video de sin soldadura.. Hice el flasheo solo del BLE y después con DownG le puse la versión 2.2.3 original y todo perfecto, después de comprobar que mi placa ESC era la versión 3. Con DownG herramientas comprobando que están las FF en la numeración y todo perfecto gracias.
Encantada de escuchar que fue exitoso.
Hi. New to this. BLE = Bluetooth firmware right? But what is the ESC and the BMS referred here? Is BMS= firmware version?
There are 3 components that have firmware on them, and you can flash them separately.
BLE = Bluetooth/Dashboard unit or its firmware
ESC / DRV = main board/motor controller or its firmware
BMS = Battery management System or its firmware
Subscribe, thanks.
Hi Mindaugas ! Thank you for all you do for the community ! Quick question for 1.5.8 BLE DRV 2.5.2 BMW 1.4.1 is it still working ?
According to the app developer, nothing has changed with the new BLE158.
Still same procedure.
Sub. thx.
Does the downgrade apply to the dashboard or the controller?
I broke my dashboard during this process because the SWDIO dot came out of the board when I attempted to desolder and resolder as it wouldn't turn on when I soldered the stlink on. Will buying a dashboard off ebay be already downgraded? I'm going to try taking my pro 1 dashboard and putting it in my pro 2, but I am unsure whether it will come with the hack I put on my old one and whether the pro 2 will still have it's features like cruise control. Or the dashboard is simply just a signaller and display?
Downgrade applies to the dashboard. After the dashboard downgrade, you can flash firmware to the mainboard over Bluetooth.
From eBay, probably it will be a Chinese clone dashboard (unless you find the original). Some of them can be used for flashing DRV; some not.
If the problem is only that your solder point came off, the wire can be soldered directly to the PCB trace.
As for the pro1 dashboard, it will work with pro2, but the hack will remain on your pro1, as speed increases when you hack DRV mainboard.
If your pro1 has unlocked BLE (dashboard), you can use its head to flash shfw and then swap back heads. The dashboard is like a gate that lets you flash the main controller.
ruclips.net/video/YAexlwq47q4/видео.html
Check the video description.
If you follow this video, there is no need to flash the BMS; I just showed that it is possible. Only swap heads, and flash shfw from the "scooter hacking utility". After that, configure speed curves to start riding.
Hope it's more clear now :)
For more info, check this Telegram chat:
t.me/scooterhackingchat
Subscribe, thanks.
@@MindaugasJocionis thank you for your reply, it has certainly helped clear a few questions I had. The pro 1 dashboard swap didn't work out for me but I can't remember what the issue was. I bought a new pro 2 dashboard from Amazon for £23 and was able to use the hacking utility to install the hack. It was much easier than trying to solder the tiny connections on the dashboard, so I'm glad I was able to do that. I needed my scooter to be able to accelerate from 0mph as I use it for carting dog crates at dogs shows too, and had Crufts just days away. I fortunately fixed it in time :)
I still need to figure out why my pro 1 won't turn on, but I have a spare dashboard now as I also got one from ebay, so I will test that out. I tried replacing a connector for the brown cable from the battery to the controller as it looked cooked, but that didn't fix it.
Glad to hear that you fixed your scooter . 👌
Hello ! I have BLE 157, BMS 141 and ESC 321, can I downgrade safely with your technique or is my ESC version too high and it will brick if I do anything ?Thank you !
321 is your DRV, not an ESC version. You can check your ESC manually by removing the bottom cover and taking out the mainboard - ESC (electric scooter controller) or by the app: "m365 downG " look in the UUID under Tools. If the UUID does not contain the characters FF , it is the new controller: Flashing the old DRV leads to Brick !!
If the UUID contains the characters FF , it is the old controller: no problem with flashing.
Even if you have a new ESC 3.1, you still can downgrade BLE as in this video, as it has nothing to do with your mainboard, it's a dashboard downgrade.
For ESC 3.1 there are different DRV (still in early stages).
More info on that: rollerplausch.com/threads/neuer-controller-v3-1-bei-aktuellen-xiaomi-rollern-brickgefahr-bei-drv-downgrade-vorgehen.5187/
Subscribe, thanks.
@@MindaugasJocionis Okay XiaoDash says that it's the ESC version, thank you!
hi friend i have mi3 and the ble bersion is : 155 drv:0.1.6 and bms : 1.4.1 i can make it with st-link ? I want to go to it ble 152 witch st-link, thanks
Yes. BTW after BLE downgrade, before flashing DRV ,check your ESC version.
If it's 3.1 you need new gen firmware.
For Mi3 before flashing hacked DRV it is necessery to downgrade to DRV003 at first. After that you can flash any DRV.
Subscribe, thanks.
Is there a substitute to making the wire tips because i don't have them
You can use any metal that fits: paper clip, paper pins, etc.
Or go to a local DIY electronic shop, there definitely you will find such or similar wire tips.
Hello, i have a Xiaomi Pro 2 Scooter and my original dashboard is dismantled or removed from the scooter. Is it possible - without any power source - to flash the dashboard? The only energy source would then come from the ST-Link. Btw the dismantled dashboard is easier to solder and to connect to the ST-Link and computer. What should I do? Better mount the dashboard on the scooter or is the alternative way possible (dismantled dashboard)?
You can supply power from stlink to the removed dashboard. Here is a link to a dashboard diagram. www.monopattinoitalia.it/ripristino-dashboard-xiaomi-con-st-link/
Subscribe, thanks.
www.monopattinoitalia.it/wp-content/uploads/2020/11/123236395_3680511102068578_4427937403415227943_o-765x1024.jpg
Hello, after downgrading dashboard bluetooth is missing there wasn't beep after flashing, any idea?
what can I do? I turn of power cable from dashboard and now I can't turn it on :(
Try to ask for help in this telegram chat t.me/scooterhackingchat
Did you soldered?
Subscribe, thanks.
@@MindaugasJocionis Yes I soldered, now I see the blinking rear light when I try to power on the scooter, thanks for response
would it be more feasible to install a permanent connector to it?
It would be overengineering; you need to do this only once. Most people do this just by holding the connections by hand :) Subscribe, thanks.
Hi, the MiDu-Flasher app does not download any of the content, what can I do? Is there any link for the files?
It downloads only once, if you downloaded it, then it will not be downloaded 2nd time as it is already in the app folder.
You can put it manually:
"If you want to flash your own BLE version, you can simply store it in the appropriate folder
under MiDu-Flasher\Resource\files\BLE\App\N51822x\(Scooter)\App.bin ".
files.scooterhacking.org/firmware/
For more help ask in this forum: rollerplausch.com/threads/midu-flasher-st-link-downgrade-unbrick.5399/
I did it in automatic mode...
Subscribe, thanks.
Ok thanks! It worked once I stop my antivirus 😅😅
Ok so I did this *WITHOUT* soldering, like you showed in the other video.
DON'T PANIC if you move the cables while flashing. It "soft locks" the scooter, but all you need to do is unplug the board (by removing the scooter "head"/steering wheel) and then replug it. You'll then have to reconnect, your scooter will appear as "Empty Flash" or "Flash", something along those lines, at which point you should be able to connect and unlock it (if you locked it). Then, try again. It doesn't just "brick" your scooter.
If you have a Pro 2 like me, you'll have to cut a little thing (check the "Doc" folder, "Diagram" picture). I just used a little exacto knife thing and just ran it through that.
I messed up 3 times, soft locking myself, and retrying, I got it on the 4th attempt and everything was good, thank you for the video
Thank you for sharing your experience ❤
It's valuable, especially for those who will do this in the non-solder method.
As for the capacitor, definitely, it won't make it worse if you cut its track (it's just a matter of warranty).
A few subscribers reported that they flashed pro2 successfully with untouching capacitors.
So I think it's just a matter of good contact.
Personally, I practiced a few times in "Dump Flash" mode to get the feeling of needed pressure and position of the pins. After that managed to flash 2 times in a row from the 1st time.
Subscribe, thanks.
Today I cut out 4 pins from an old IC solder socket and soldered that to the display board. This way I now have a permanent plug-in connection for the ST-link. Good for playing around or if you will use the board to flash other scooters etc.
@@juleol99 Very cool. Subscribe, thanks.
I have a pro 2, do I need to cut the c2 trace if I want to downgrade? I haven't tried to downgrade yet, but if I was to would I have to cut it?
Thanks
No, you don't have to cut. Sub. Thx.
Hi do i need to remove some capacitors for this to work or i just directly go to soldering? Thank you!
There is no need of removing capacitor or cutting trace, stlink will connect @ lower speed. Subscribe, thanks.
Will it work on a xiaomi electric scooter 3 2022 version (max speed is 20 kmh)? And how can I check my BLE, DRV and ESC?
Yes, it will work, you need to choose mi3 in the scooter selection option.
You can check your ESC; DRV; BLE; BMS with "m365 downG "
As for the ESC version: in m365 downG look in the UUID under Tools. If the UUID does not contain FF characters, it is the new controller. 3.1
If the UUID contains the characters FF , it is the old controller. 3.0
Subscribe, thanks.
Hi. I have 365 pro
with:
DRV Ver:160
BMS ver:107
BLE ver:15188 (or on another application (-.1.0)
What can be done in my case ? ;/
Thx and regarding
I don't have experience with these older models. If it's the original dashboard you don't need stlink, as m365 pro does not have BLE that is unflashable with BT. Follow this guide: www.monopattinoitalia.it/miglior-firmware-xiaomi-v2/ (use google translate)
In addition to DRV, you will need to flash BLE that is prepared for the new DRV version.
And try to ask for more help on this telegram chat: t.me/scooterhackingchat
Subscribe, thanks.
Hey, I have a xiaomi m365 Pro2 and the BLE is at 158, I want to downgrades but I have a doubt, is necessary to take de c2 capacitor to make the downgrade as you show ?
No, there is no need to cut or desolder the capacitor.
Subscribe thanks.
@@MindaugasJocionis thanks, and off course I’ll suscribe 🤗
Hi. I have a m365 and I flashed via Bluetooth BLE129 that I downloaded from scooterhacking. After flashing it the scooter simply disconected from my phone, the battery level dots went dark, the button didn't work and it started behaving like it was blocked. It also doesn't appear when i search for bluetooth devices.
A few hours later it stopped behaving like it was blocked and now it simply blinks the tailight when the button is pressed. Thats the only response that I can get from the scooter. The rest remains the same except that it doesen't block the wheel when its moved anymore.
Do you think that doing this procedure would solve this problem?
Probably yes, choose write flash instead of downgrade in the midu flasher. I believe to use shfw on m365 you need modified ble "BLE90For4dot_zipv3.zip" it can be found in this telegram chat: t.me/scooterhackingchat
Subscribe, thanks.
@@MindaugasJocionis Thanks. I will try this as soon as i get the ST-Link
Big thank, man! Love from Russia!
Subscribe, thanks.
Hello, in some guides is recommended to remove the c2 condensator and R1 resistor (backside) in order to enable fw flashing… can you confirm that these steps are not really necessary?
No, it's not necessary. After BLE downgrade don't forget to check your ESC version. There are different DRV for 3.0 and 3.1 boards. Subscribe, thanks.
@@MindaugasJocionis thank you! My board is not 3.1 , what is the DRV version needed for my model?
@@salvatoredanielelanzafame5067 If it's not 3.1 you can use any DRV, it will not brick your mainboard.
@@MindaugasJocionis ok thank you! I will follow your guidelines
@@MindaugasJocionis ¿mi placa es la 2.3 v hay posibilidad de brink?
After midu finished downgrading, my Mi Home app got automatically disconnected. Now the scooter still has the "Lock" logo on on the dashboard. What can i do?
Connect to scooter with "Scooter hacking utility" app and unlock it. Subscribe, thanks.
@@MindaugasJocionis thank you so much for your tutorial. I managed to downgrade BLE, now I'm watching other tutorials on scooter hacking. Have a nice day
@@stefanxcz Check the video descriptions, as some videos are old and outdated. The easiest way to speed up scooter is with "Scooter hacking utility".
@@MindaugasJocionis yep, just made my own with Direct Power Control and it reaches 35KM/H
@@stefanxcz Nice :)
ok sa basically it's been like 4 weeks more or less but still I can't find the link to install the stuff in my st link and the software that I gotta install can someone send me links, I know this seems so random but help please I have a xiaomi essential/lite.
Links are in the video description.
Thanks! It worked like a charm!
:)👍👋
Nice, subscribe, thanks
friend, it is not necessary to remove the resistance 16?
No, there is no need to desolder the capacitor or cut its track.
Subscribe thanks.
When i flash it, will i be able tp change top speed and tune it with scooterhacking utility?
yes
how do i get the blt id mine isnt there and dont know how to get it or where to put it
Are you getting error? Try to choose write flash instead of downgrade. Subscribe, thanks.
Can this be done with a BMS over 1000 and a two lever Xiaomi 1S?
BLE and BMS are independent parts. Just don't flash BMS.
You don't need to touch BMS in order to achieve higher speed.
BLE is your dashboard firmware
DRV mainboard firmware
BMS battery controller firmware
As for compatibility with 2 brake lever scooter, try asking in this telegram chat: t.me/scooterhackingchat
Hey, why is it showing No Connection all the time? Im holding it on
Without soldering, you need to remove the coating from these contacts with isopropyl, etc. Subscribe, thanks.
Sir how about the xiaomi mercedes can i pick pro 2 to continue downgrade?
Yes, mercedes edition is pro 2 with different look.
Subscribe, thanks.
Can the same process be applied for Pro 2?
UUID Contains FF
DRV Version:252
ESCVersion:2.5.2
BMS Version: 1.4.1
BLE Verison: 1.5.8
Yes, just choose your scooter model instead of 1S.
Subscribe, thx :)
Hello! I will be trying this soon, I have ordered an st link the wires are different colours compared to the video. Does this matter?
Any help be great
It doesn't matter the color of the wire, what matters is that you connect to that wire on both sides.
Subscribe, thanks.
@@MindaugasJocionis Awesome i have eveything i need! i have noticed there is 2 vervions of drvier in the describtion 1.0.4 and 1.0.5 ? i have used the same in the video hoping to do this tomoroww will subscribe if works
@@OllertonRolling This is a newer version of midu flasher with minor bug fixes.
v1.0.5
-Windows 7 fix (curl)
-no blt-id detection
Does it still work with the firmware version 2.5.2 and DRV ver. 252 / BLE ver. 158
Yes it's the same on BLE158. Subscribe, thanks.
if i do this will it fix error 27 or i gotta flash the controller for that ?
You need to flash the controller
Cant i just buy a flashable motherboard or flashable display? I have a ninebot g30 max clone that wont connect to any scooter app exept minirobot
No idea, try asking in this Telegram chat: t.me/scooterhackingchat
And don't forget to subscribe, thank you.
I don't have the tips you put on the wires what do i do
You can find them at any local DIY electronics store, or check out the affiliate links in the video description. Or use any suitable metal, such as a cut paper clip.
Subscribe, thanks.
I atempted to downgrade my ble but IT disconnected and Now ist not doing anything
I did this without soldering you just gotta press hard to keep a good connection.
Yes, I have video without soldering :) ruclips.net/video/NYxrvGhevwg/видео.html
Thanks for comment, glad that you succeeded, don't forget to subscribe.
Thanks for this guide, i downgraded my 1s without the soldering and flashed a custom firmware, fully charged i reach 30kmp, is there any way i can go faster?
Only with the "field weakening" option from the "scooter hacking utility" app. Though I don't know the safe values to avoid burning the motor. I tried with my Mi3, reached 40km/h, and the motor was hot to touch after 2km. So... Subscribe, thanks.
Perfect thx mate your welcome you vid is gorcieous
Sub. Thx. :)
Hey i did this and i use the no soldering method but it went off the pins a few times then when i finished it, ir works but it shows an error 42
Mi scooter 3? Did you flashed some DRV? Install shfw from "scooter hacking utility" and configure it. Check this telegram chat for moore info t.me/scooterhackingchat
Sub. thx.
@@MindaugasJocionis Yeah i have a Mi Scooter 3 and i downgraded it using the no soldering method and it did show error 42 but when i flashed it to install SHFW with Scooter Hacking Utility its fine now, Thanks for the great video
@@mohammadannasnadeem5281 Nice :)
Hello, thank you for your video.
I have a BLE 158 and I am unable to establish a connection to the scooter. I am waiting until a speed of 100, but without a success. Could this connection problem be because of the higher BLE version of 158?
I tried with the both midu flashers.
Thanks!
Did you checked for continuity with multimeter 6:06 Probably a bad contact.
Subscribe, thanks.
@@MindaugasJocionis yes, I did..
My st link has another schema, I am connecting them according to my schema. 2-SWCLK
4-SWDIO
6-GND
Could this be a problem?
@@MrGeorgimavrov I will text you on telegram
amazing video bro! Sorry, One question: in the program support the mi scooter 3? i have the same u dashboard
Thanks. Yes, miduflasher supports mi3 scooter. Don't forget to subscribe :)
Do I have to solder it and if not, I have to redo these wires somehow? By that i mean 4:27 process
You can do the same without soldering: ruclips.net/video/NYxrvGhevwg/видео.html
Or after the downgrade, you need to desolder those wires 10:33
Subscribe, thanks.
Ok thanks
Dzięki za fajny filmik w którym wszystko szczegółowo opisałeś. Dziś zobiłem downgrade majej Xiaomi M365 Pro2 w której po zakupie w maju 2022r. zaktualizowałem oprogramowanie przez oryginalną aplikację MiHome. Wgrało mi BLE157 i nie mogłem modować bez podmiany kierownicy od znajomego. Dziś dzięki Tobie mam BLE 134 i mogę swobodnie testować różne wersje DRV. Sterownik oczywiście oryginalny z maja 2021r. Jeszcze raz dziękuję i Pozdrawiam.
Dzięki za tak pozytywny komentarz. Cieszę się, że się udało. Nie zapomnij podpisaćsię. :)
Też mam BLE157. Muszę sprawdzić czy mam w skrzynce akurat ten programator. Jeśli tak to zaraz to zrobię, a jeśli nie to lipa, bo muszę zamówić i czekać.
Zamów w Polsce będzie szybciej niż czekać z aliexpress
@@MindaugasJocionis właśnie chciałem pisać, że nie mogę znaleźć żadnego, ale ST Linka chyba nie miałem, albo już dawno przesiałem, więc zamówiłem. Jutro będzie 😁
@@MindaugasJocionis ogólnie z Aliexpress zamawiam jak mi się nie spieszy i jest dużo taniej lub nie ma tej rzeczy gdzie indziej, a i tak staram się zamawiać z wysyłką tak by w maks 1-2 tygodnie było u mnie. Tutaj nie będę czekał dla oszczędności kilku złotych, zwłaszcza, że mi się spieszy
Labas o pas mane ble 1.5.7 o drv 2.4.8 tai norint kad leistu greitinti paspirtuka reike fleshinti ble versija?
Taip, teisingai. Sub, aciu :)
O reike kokiu failų fleshinant kur jųsu yra nuoroda programai ar ne?
@@ovidijusa1352 Tas miduflasheris viska auto is interneto partraukia, svarbu tik paspirtuko modeli tinkama nurodyt.
Poto kai downgradinsi BLE, paziurek koks ESC kontroleris 3.0 ar 3.1 Jei 3.1 tai siti DRV kur visur pilna netinka, reik kitus naudot.
Hi, honestly, I don´t know where is problem. I have Pro 2 with BLE 1.5.7. I stucked on 9:40. It say "Connected" but the message follows: Error, retrieve in 5 seconds. Please help
I think it's bad connection, check continuity with multimeter. Subscribe, thanks.
@@MindaugasJocionis everything checked, also continuity. I tried it on 2 computers with different cables from Stlink to Xiaomi dashboard. Hmm
@@MindaugasJocionis DONE! I´ve got it. What helped to me? In Select an Action I tried to choose "3) Write Flash" instead of "1) Downgrade" and it works. Now I have BLE 134 on my Pro 2. Great!
@marcel698 Glad to hear you got the issue resolved :)
Sorry for not replying, I didn't receive notification of your previous message.
did it without soldering, it worked :) thanks
Great, don't forget to subscribe, thanks :)
Merhaba, bu yöntemi ben de yapmayı düşünüyorum lehimlemeden yapmışsınız sanırım dikkat etmem gereken bir husus var mı acaba ?
Ek olarak downgrade işlemi sırasında bağlantı koparsa tekrar başa sarıp downgrade yapabiliyor muyuz?
@@BaldwinnIV lehim yapmadan doğruca üstünde tutarak yaptım. Eğer temassızlık yaparsak el titremesi vb sonucu herhangi bir sıkıntı olmuyor, programı baştan açıp daha dikkatli tutıyorsunuz. 5. Denemem civarı başarıya ulaştım
@@denizboyuna Teşekkür ederim dönüş yaptığınız için, şu an stlink siparişini bekliyorum geldiği gibi bu yöntemle yaparım, temassızlık olursa ne gibi bir sorun oluşur diye tedirgin olmuştum cevabınızla rahatladım :)
@@BaldwinnIV slow mode'a geçene kadar temas ettirmezseniz daha da hızlı olur süreç, bozma ihtimalimiz yok neredeyse yani rahat olun :)
Sveiki, aciu uz issamu video. Ar reiketu ta pati padaryti ir su kontroleriu? Nes scooteris gali tik isijungti ir nieko daugiau. Net norint isjungti reikia atjungti baterija...
La, o kaip atsitiko kad tik isijungia, kokias klaidas rodo? Ar nauja ESC3.1 nuflesinai su senovisku DRV skirtu 3.0 kontroleriam? Sub. aciu.
Hello please help. When i am in the part of "press any key to continue" , there in an error "could not download file.
Pc must be connected to the internet, as well as disable antivirus or firewall (if using 3rd party). If that does not help (might be FTP server is down etc.) Do this:
"If you want to flash your own BLE version, you can simply store it in the appropriate folder under MiDu-Flasher\Resource\files\BLE\App\N51822x\(Scooter)\App.bin
BLE can be downloaded: firmware.scooterhacking.org/
Hi dear
I just want to ask if thi solution work with ble 158 drv 252
On xiaomi pro 2
Yes. Sub. thx.
Hello Sir
My scooter
BLE is 1.5.7
Drv STM32Fl 2.4.8
Uuid contains letter FF
Can i flash it by changing dashboard ?also if yes will i be able to use extern battery like i did my old scooter xiaomi pro2 ? Thanks in advance sir
Yes, you can flash any custom firmware to the motherboard after a dashboard replacement or ble downgrade. Whether an external battery can be used depends on the firmware used.
For more information about external batteries, please contact this telegram chat:
t.me/scooterhackingchat
As I personally hawe zero experience with external batteries.
Subscribe, thanks.
dekui!
Ner uz ka, sub, aciu :)
Hi, my friend has a pro 2 mercedes version drv: 155 ble: 157 and he flashed using downg without downgrading ble with a file called "Drv_233_Pro2_StockFW.zip" Will this brick my pro 2 (ble 157 and drv 233)?
Until BLE157 is not downgraded, nothing can be flashed. After flashing the firmware will remain the same as before flashing.
@@MindaugasJocionis Is it safe if i tried flashing this file on my pro 2? Hes been teasing me to do it because im terrified about my scooter getting bricked, i don't know how his scooter actually goes 33 km h/
@@asid.6642 You can brick your scooter while flashing DRV made for ESC 3.0 to ESC 3.1 What is your ESC version?
Download the "m365 downG " app and look up the UUID under Tools
If the UUID does not contain the characters FF , it is the new controller 3.1: Flashing the old DRV* leads to Brick !!
If the UUID contains the characters FF , it is the old controller 3.0: no problem with flashing
@@MindaugasJocionis It has FF so i can try to flash and no harm will happen?
@@asid.6642 Yes you can try.
Hi there.
I'm here with a problem I encountered. Basically I successfully connected the st-link to the scooter. Did everything right but when it comes down to the Midi flasher its not working properly.
Started the program, choosed the corresponding options in it and didn't thrown any unexpected error when I started. I did not cut the connector to the condensator and waited the 5 error.
When the Midi Flasher lowered the speed to 400, there was a weird thing. The program said its connected, its shown as connected but after a second or so the error that it cant connect came up like when the speed was too much. I think'ed it's a problem like so and waited. The program went from connected to error and so on till it reached the point to lower the speed more but now only just the errors popped up.
I tried to resolder it 2 times and did not worked. Tried to change the ST-Link firmware or reinstall the whole thing but that did not worked either.
I don't know what's the problem soo that's why I write this :D
I have a Xiaomi Pro 2.
I hope you can help me or someone and thank you in advance :))
Try to ask for help in this telegram chat t.me/scooterhackingchat
Did you checked for continuity with multimeter? In my opinion it's bad connection.
Subscribe, thanks.
Yep I checked for continuity and it was ok.
Maybe going to try again with a better solder because mine is like a cheap one XD and with better equipment for soldering.
Hi there. I had same problem. What helped to me? In Select an Action I tried to choose "3) Write Flash" instead of "1) Downgrade" and it works. Now I have BLE 134 on my Pro 2 and back my custom FW (flashed again).
Hi sir, i just ordered an st-link, but i have ble 3.1 board, can I downgrade it with scooterhacking reflasher?
BLE board 3.1 or ESC board 3.1?
@@MindaugasJocionis Ble board
@@dog_ds I think it should work, ask in that telegram chat I provided earlier.
@@MindaugasJocionis okay thank you sir
Matau lietuvis gal zinai kur isigyt st link arba gal galetum padaryt uz minimalia kaina ?
When i try to Flash it the software just keeps saying error pls help
If you soldered it, it means there is a bad contact or the wires are connected incorrectly. If you're just holding these pins by hand, clean the protective coating off the circuit board with isopropyl alcohol and hold as steady as you can. Subscribe, thank you.
There is 2 Links
One is STLink - v1.0.4
Another is STLink - v1.0.5
Which one should i use plz reply
Use V1.0.4 If you will have some issues with it, then use V1.0.5
Subscribe, thanks.
Hi, i just downgraded the BLE to 152 on xiaomi mi 3 and it shows error 42. I realy dont know what to do. I tried to flash the firmware using scooter hacking but it didnt work. Any time i tried to flash it, it "crashed". Scooter turn on while the firmware was uploading and make a sound. Thanks for any advice ! 🙏
DVR 317
BMS 1702
BLE 152
Check your ESC version if it's 3.0, then flash DRV003
files.scooterhacking.org/firmware/mi3/DRV/
After that, you shud be able to flash SHFW
If ESC is 3.1 try asking in this telegram chat t.me/scooterhackingchat
as I don't know for sure that ESC 3.1 supports DRV003
Subscribe, thanks.
@@MindaugasJocionis Thanks a lot you save me !! It worked.
Glad it worked :)
Can I downgrade to hack the speed as my scooter configuration as mentioned below?
DRV Ver 248
BMS Ver 141
BLE Ver 157
UUID 48FF70068------1067
And one more question is, Can I replace the dashboard instead of doing stlink? If so do I need to do something with the controller?
Thanks in advance….
Thanks in advance.
Yes, you have ESC version 3.0 so any DVR is compatible. And yes, you can downgrade the BLE version as shown in the video.
As for the dashboard, if it is original, then it should work out of the box, if clone, then ask the seller.
Subscribe, thanks.
Can I downgrade with miduflasher also on the controller
You mean bricked 3.1 ESC controller?
Subscribe, thanks.
does it work with xiaomi mi pro 2 2022?
Yes. Subscribe, thanks.
Is midu flasher only for dashboard ?
No not only for BLE, but it must not be bricked. And if it's not bricked, there are more easy ways to flash DRV than soldering to ESC.
Thanks so much
You're welcome! Thanks for watching, don't forget to subscribe :)
Hello its work on ninebot max g30 in ble 170 ?
Sorry I don't know much about ninebot, try asking in this telegram chat:
t.me/scooterhackingchat
Subscribe, thanks.
Is there any difference between the different colored ST links? I ordered the green one, which cables need to go where? lol
They are all the same. Watch the video @ 7:01-7:04 to see where to connect the wires.
Subscribe, thanks.
Also hauptsache die 3 gleichfarbigen connectors irgendwo in dem ST Link einstecken? Und wie nennt man diese Wire Tips in Deutschland? 😅 Dankeschön!
@@YogiMystic No, you need to connect those 3 pins on the dashboard: (GND; SWCLK; SWDIO) to pins on stlink with the same label. (there is a diagram on stlink).
I'm not from Germany :)
Oh okay, sorry for the confusion and thanks again :)
@@YogiMystic No problem :)