Aruba - IAP-105 Factory Reset & Initial Setup

Поделиться
HTML-код
  • Опубликовано: 4 ноя 2024

Комментарии • 33

  • @AbhishekKumar-nt3in
    @AbhishekKumar-nt3in 3 года назад +3

    Nice video buddy. Aruba APs are very expensive to buy or ship to India. I am happy with Archer C7 and A7 with OpenWrt as my Access Points and a Managed Switch.

    • @VanTechCorner
      @VanTechCorner  3 года назад

      Glad you like the video. This model (IAP-105) used is around 14 USD in my country. I plan to install OpenWRT on it as well.

  • @mariojuliocarbonetti2167
    @mariojuliocarbonetti2167 2 года назад +4

    thanks for the video.
    can you please give me some info about how to convert the AP-105 into an IAP-105

    • @SinanKARABABA
      @SinanKARABABA 9 месяцев назад

      Hello Mario, did you convert your ap to iap ?
      could you share with me your expreience ?

  • @HoangTheBoss
    @HoangTheBoss 3 года назад +1

    First time viewer and found your accent very familiar, turns out you are a Vietnamese too
    xem video lần đầu thấy accent tiếng anh nghe rất thân thương =)) thì ra bro là người Việt

  • @smoejith9283
    @smoejith9283 11 месяцев назад

    Hey nice video.. can you do a video for the install of the current 23.05 Openwrt on the ap-105? Instructions on the OpenWRT page are kind of fragmented with updates.

    • @VanTechCorner
      @VanTechCorner  11 месяцев назад

      It will be more or less the same, all you need to do is replacing the file I used with the current version.

  • @drakdragon
    @drakdragon 2 года назад

    Does the AP105 have Client Isolation support?

  • @thienminh3456
    @thienminh3456 Год назад

    Dòng open mesh HSv4 có chay đươc open wrt ko b

  • @johnh10000
    @johnh10000 2 года назад

    Well I bought an AP-205 so it became clear I bought the wrong thing! So I found two API-105 for a tenner each. Still not sure why the AP-205 kept rebooting.

    • @VanTechCorner
      @VanTechCorner  2 года назад +1

      The AP-205 is a good AP, unfortunately it is not supported by OpenWRT.

    • @johnh10000
      @johnh10000 2 года назад

      @@VanTechCorner I'm using the latest pfsense

  • @dianar6025
    @dianar6025 3 года назад

    Hey ! thank you for this video !
    I 'm a bit confused the one you show in the video is a AP- 105 or API- 105 ? because the label in the back states AP-105

    • @VanTechCorner
      @VanTechCorner  3 года назад

      Hey, it was AP-105 which has been converted into an IAP-105. (just the difference in software/firmware, no hardware difference). To install OpenWRT, you are about to write the uBoot directly to the NAND FLASH, so it doesn't matter what type of AP the 105 has.

    • @thebootsie1233
      @thebootsie1233 2 года назад +1

      @@VanTechCorner Hi! Just curious, how did you covert the AP-105 to an IAP-105?

    • @phoonjzc
      @phoonjzc Год назад

      ​@@VanTechCornerdo you mind showing the steps or better still a video to convert AP into iap?

  • @FurianFlame129
    @FurianFlame129 3 года назад

    I just watched your defaultcurhoplimit video and I had a question. It worked on my verizon cell phone which was unlocked. I switched to att and bought a locked phone and it doesn't work. Does it have something to do with it being a locked phone or just att?

    • @VanTechCorner
      @VanTechCorner  3 года назад +1

      I think it is something to do with the telco (att). Maybe you can try PDANET+ and see if it work. ruclips.net/video/rvS1SqkPaQ4/видео.html

  • @MC-td4kv
    @MC-td4kv Год назад

    Aruba - AP-93 Factory Reset and Initial Installation how to do it please tell visually from start to finish

    • @VanTechCorner
      @VanTechCorner  Год назад

      Hi M C, unfortunately I don't have this device to make the video. Sorry about that.

  • @error-un3fo
    @error-un3fo 3 года назад

    Will the enet blink red once in a while in factory reset? Because sometimes cameras dont pick up certain leds

    • @VanTechCorner
      @VanTechCorner  3 года назад

      Hi, in my video, no cable connected to ENET port during the factory reset and I can confirm that the ENET LED is off. Only the PWR LED blink.

  • @marsalans
    @marsalans 2 года назад

    Hi, i also have aruba ap-105 which is ap and i have a problem that i plug it on console and it does not load, i try to reset it but nothing, i think the firmwre is bricked, i want to install iap firmware on it. how to do that ?

    • @VanTechCorner
      @VanTechCorner  2 года назад

      Sorry mate I am not an Aruba expert. If you have the flash tool, I can share the dump file and you can write it to your NAND Flash chip.

    • @phoonjzc
      @phoonjzc Год назад

      ​@@VanTechCornerplease share the file

  • @mohdhuzaifahzianal4825
    @mohdhuzaifahzianal4825 3 года назад

    hi buddy, is it possible to flash redmi ax6 from stock to openwrt?

    • @VanTechCorner
      @VanTechCorner  3 года назад

      Hi bro, currently this device is not supported by OpenWRT.

  • @jothed1
    @jothed1 Год назад

    Mine does not have a reset hole, how do I get this setup going

  • @nhuongreus4809
    @nhuongreus4809 2 года назад

    Hi Bro. I need firmware aruba IAP 105

  • @HaiThanh-rz1si
    @HaiThanh-rz1si 2 года назад

    you help me configure ap aerohive with putty.

    • @VanTechCorner
      @VanTechCorner  2 года назад

      Hi, I don’t use aerohive so I can’t help you with this.