I have a 2008 base in the same color…love it…your color match looks very good to me on the video, gives me some hope that if mine is ever damaged it can be matched…
Hopefully you have sourced the splash guards already the OEM VERSIONS are discontinued. I needed the right side rear and no joy. Limited aftermarket selections; none at a reasonable cost
Haha yeah I ran into that issue. Currently bought some aftermarket ones that are carbon. They have some slight fitment issues but over not terrible. Still waiting for some OEM ones to surface lol
What width tire you end up getting? I’m wanting this but I’m scared of not being able to get the right fitment especially if I’m spending 1500 on a carbon fiber set
I actually made a video on the tires I’m running not too long ago. I ended up putting OEM Zo6 wheels on my car and they fit perfectly. Go on my channel and check it out if you want. I go over the fitment and everything
Thank you! I was able to find the vent bezels but not the actual vents that connect in the fender liner to cool the breaks. Those ZO6 fender liners are discontinued from GM so you would have to find them off a wrecked car or find them used somewhere :/
@@apprenticeautomotive ohh ok got it , yeah i think ill put some mesh on that vent , just to cover a lil bit the vent hole , and about the rear inner liner i think i found a page that supplies the parts to GM i just order the 2 rears and 1 on the front , lets see if its good quality and if they work im fingers crossed , if no , i just wasted 400 bucks 😥😅
Driving without the fender liner was fine, it just had a little more cabin noise. I ended up cutting the old fender liner lip off and put them back on and it works perfectly! I’m going to make a video explaining everything I did. A lot of the Z06 conversion parts are discontinued which sucks :/
@@apprenticeautomotive i cant wait to see that vid man! Im currently trying to do mines as well. Did you have any issues with the gas door without the liner?
I have a 2008 base in the same color…love it…your color match looks very good to me on the video, gives me some hope that if mine is ever damaged it can be matched…
That’s awesome, I love the color! Yeah the shop did a great job, they didn’t even need to blend it!
That paint match is absolutely beautiful
Looking good man! I’m currently building my widebody C6 as well. I went with Apex racing wheels. They are fantastic and look stellar.
Thanks I appreciate it! I’ll have to check out Apex racing wheels, good luck with your build!
From experience: If you go with JD corvette wide front fenders in the future. Go with an OEM front bumper rather than the JD corvette front bumper.
Thank you for the info! I’ll keep that in mind
Where can I find the front JD quarter panels? I don't see them on their site.
Never heard of JD Corvette so I'm hopeful
Great video with instructions
Thank you:)
Set of grand sport wheels!!!
Looking good Mrs Wheeler
lol
Hopefully you have sourced the splash guards already the OEM VERSIONS are discontinued. I needed the right side rear and no joy. Limited aftermarket selections; none at a reasonable cost
Haha yeah I ran into that issue. Currently bought some aftermarket ones that are carbon. They have some slight fitment issues but over not terrible. Still waiting for some OEM ones to surface lol
You should do a total price video
Good idea, I’ll put that in my notes of video ideas!
I’d say maybe a set of C7 zr1 wheels would look nice
I was thinking about these! They would look sweet
What width tire you end up getting? I’m wanting this but I’m scared of not being able to get the right fitment especially if I’m spending 1500 on a carbon fiber set
I actually made a video on the tires I’m running not too long ago. I ended up putting OEM Zo6 wheels on my car and they fit perfectly. Go on my channel and check it out if you want. I go over the fitment and everything
Great job man !! gratz !! , btw man , did you get the rear fender vents ? the trim between the fuel door and the door ?
Thank you! I was able to find the vent bezels but not the actual vents that connect in the fender liner to cool the breaks. Those ZO6 fender liners are discontinued from GM so you would have to find them off a wrecked car or find them used somewhere :/
@@apprenticeautomotive ohh ok got it , yeah i think ill put some mesh on that vent , just to cover a lil bit the vent hole , and about the rear inner liner i think i found a page that supplies the parts to GM i just order the 2 rears and 1 on the front , lets see if its good quality and if they work im fingers crossed , if no , i just wasted 400 bucks 😥😅
What’s up man it turned out amazing 👍 if you don’t mind me asking how much was the paint match?
Thanks I appreciate it! The paint match out the door was $1200
Do you have the link to the rear splash guard?
No, I’m actually currently looking for them right now, the passenger side was discontinued from GM for some reason but not the driver side
These look great for the price 😳 How are they holding up? Really considering getting then
So far so good! Haven’t had any problems with them yet:)
Did you do the liners as well? I kept reading that can add to cost.
I ended up cutting my old ones, the ZO6 liners are discontinued so you’ll need to find them off a recked car or something
@@apprenticeautomotivehow did you cut them? Any videos or pictures?
How did you feel it driving without the wheel liner? Is all you installed then just the quarter panels that’s it?
Driving without the fender liner was fine, it just had a little more cabin noise. I ended up cutting the old fender liner lip off and put them back on and it works perfectly! I’m going to make a video explaining everything I did. A lot of the Z06 conversion parts are discontinued which sucks :/
@@apprenticeautomotive i cant wait to see that vid man! Im currently trying to do mines as well. Did you have any issues with the gas door without the liner?
big money! your rich!
Haha I wish man, just living at home with my parents and have no bills, that helps a lot!
i have a base c6 too and want to do the same.what size wheel and size is needed for the widebody.and do you need spacers
You’ll need a 12 inch wide wheel in the rear, if you use a 10inch wheel you’ll need a 1.5inch spacer
Link to product of bolt on panels?
www.jdcorvette.com/05-13-QUATER-PANEL-COUPE--LH--Z06-DESIGN_p_2373.html
You can also call JD corvette and ask for Douglas, he helped me out with everything!
did you take the fenders back off for paint?
Yes, the place I brought them too painted them off the car and then put them back on
How much did you end up paying to have the quarter panels painted?
Out the door it was $1200, I think I got a pretty good deal. I had other places quote me $2500 and over
2500 is insane
@@apprenticeautomotive
Is that an extended zr1 carbon spoiler?
It’s actually just an eBay stick on spoiler, it was like $70