The JSAUX is really good the only issue is the fit on the top. It’s not completely snug which is a shame. JSAUX should add the flaps like the killswitch has
That is a shame that the fit isn’t as snug. The material is softer and more stretchy. Flaps would be nice to help keep the shape when installing. Their price point is great for the quality you get. Half the price of the killswitch.
This is really annoying me with this one too. Have you found anything that helps it fit better… someone said to manipulate it with heat like a hair dryer/ blower.
I’ve used this double sided tape. It’s not glued or permanent. It’s used for electronic screens. Comes off without residue and is high heat resistant. Here’s an Amazon link: a.co/d/2O4QwfW
I just got the skullnco carrying case for the ally x. I had a really bulky one and honestly this one seems so good. Tysm for letting me see how slim it was
For the KillSwitch, the snap case gets a bit looser as you use it. What bugs me more is that you can't remove the kickstand. I almost want to cut it off. I have a nice Ugreen dock I can't use anymore because the kick stand get's in the way.
You might be able to knock that pin out with a pin punch enough to grab and pull it out. It looks like it can be knocked out from the left side to the right.
Super honest review love it! I just got my kill switch the Rog ally x jsaux and once I turned it over the vents kinda bummed me out but saw another RUclipsr did a test and didn’t mess with it much but like he said it might kick the fans in some
@@GamingRepairs fr it is definitely nice I love it, needed it to have my Dj software on the go and with this I can start tossing it in my bag with a worry lol. I hope so but for now this will do, also naw thank you 🙏🏻
@@GamingRepairs yea me and my friend started our journey producing music and hopefully perform at some underground’s soon than expected 😭. I started buying cases and covers for all my equipment to have ready to go and not worry. I had the asus Rog bag with the cheap zipper and not a hard case forgot all about my little machine that’s been helping me.
I really needed this video thank you I personally for the skull and co grip case for ally x on preorder but it should arrive soon.. can’t wait to see how they all differ
Thank you for the video, I don't tend to drop my devices very often so my main purpose in getting one of these cases would be for grip purposes. I'm prone to getting sweaty hands when playing, can I ask which you would recommend for the best grip? It would be great if you could rank them from best to worst. Thank you :)
Hey! You’re welcome! My favourite is the killswitch for overall premium quality, tight fit, and full protection (I use the cover daily) with the best sweaty grip in my opinion because it’s the most course. If you skin the obsidian skin, they’ll also send you the triple black with it typically (2 for 1 skin pick). The killswitch just went on a Black Friday sale today. My second would be the skull and co for the open back on the vents and comfort. Sweaty grip rating I’d give in par with the jsaux one. No kickstand but it can self stand upright with the flat bottom. No front cover but the best if you plan on replacing the back cover with an aftermarket coloured or transparent one when they eventually release. Probably will have a sale for Black Friday too. The jsaux one is also on sale for Black Friday. Feedback on the Ally X one is that the top stretches when you put it on. Take a few days to retract but not quite snug. Has the front cover (which I love) and the grip is the softest. Again, sweaty grip rating not as good with the soft grip. dbrand.com/shop/catalog/rog-ally-x
@ Wow, thank you so much! I really appreciate you taking the time to provide such a detailed reply. It definitely wasn’t necessary, but I’m incredibly grateful nonetheless. You’ve totally sold me on the Killswitch, especially with the Black Friday sale, it feels like a no-brainer. I can’t thank you enough! The least I can do is subscribe to your channel. I noticed you’ve owned a variety of portable consoles, including the OnexPlayer X1. I’d love to see a tier-list style video comparing it to devices like the SD and Ally. I’m really interested in trying one myself, but honestly, it’s totally outside my budget for a handheld. Oh, and one last thing, how do you feel about the Dbrand screen protector? Does it negatively impact the experience compared to not using a screen protector at all? Thanks again!
@calvin3941 You’re welcome! Thanks for the sub! I appreciate it. Spoiler, the full X1 is my favourite device but I have the Intel version because there wasn’t an AMD available at the time. So… I bought the X1 mini 8840u when they released it for the AMD experience - also great. Onexplayer is going to be releasing a new the X1 series with new AMD chips and I’ll definitely buy one of those. The Ally will always hold a special place in my heart and the Ally X filled it even more. It’s a such a solid travel, budget, and in country support friendly device for North America especially with the Best Buy store fronts. I prefer the jsaux matte screen protector 2 pack(anti glare) over the dbrand high and price glossy glare single pack one. The case is really good with any screen protector. Amazon has the jsaux ones too and last prime day they were on sale so I expect they will be on Black Friday too. I’m curious which skin you’ll pick? Haha
Yeah, my biggest complaint with the jsaux case is that the top lip doesn't grab the ally very well. It's raised ever so slightly and makes using the fingerprint reader annoying,
That is annoying. You could try some of this double side screen repair tape. It’s what I used to keep the Amazon one from lifting and snagging my RB button. I ran it along the power button edge near the screen. a.co/d/aIBAx6p
I recently purchased the jsaux case, and I'm regretting it. It doesn't fit all that well. However, I do like the mods on the back of the case. I think I'll get a dbrand in the future.
I’ve heard that the Ally X one stretches the top when you put it on then after a few days it should pull back to form still not tight though. Is yours loose on the top? The dbrand one is a solid but comes with that premium price tag. I really like it though.
Just got my Skull & Co for the X after loving it on my orginal Ally. And its great for its very cheap price. I do like the Killswitch a lot as it looks the cleanest of the bunch but that price tag is ridiculous compared to what you get with the Skull and Co. But then again its a euro device so its not that bad in comparison.
Yeah, the price is definitely at a premium compared to both the skull & co. and the Jsaux cases. Skull & co. is the only I still use with the original Ally. The open vents are great with my backplate and it’s really comfortable.
@@GamingRepairs Same here just sold my original Ally but used to Skull&Co on it because of those vents. How are the DBrand skins? Do those get loose over time? Never had one of those but tempted.
On my Legion Go it the skin starting to get loose after a few month. I don’t think this Ally X skin will have the same using when using with the killswitch case because the skin is “case hardened” and the killswitch is holding all the edge I had problems with deep under it secured tightly. But we’ll see lol.
Would you consider making a video on how to (safely) update both One X GPU drivers, and Side loaded AMD drivers without having to start the process over from scratch?
Hey! I actually already have one and links to the current drivers are in the description. It’s a much shorter video than my “Fully loaded” Install Guide. 😊 ONEXGPU How To Install New AMD Drivers With Legion Go And Rog Ally X ruclips.net/video/tYuo2eVdcWE/видео.html
@@GamingRepairs regarding your awesome updated video, for the Ally X, the process is still valid, and it's the same right? Something to be aware of like AMD Adrenalin software installed by default by Asus? Thank you for all your help testing and sharing your knowledge with the community.
Yes, the process is the same in the video for the Ally X install. The only catch is that there’s problem with the October Drivers and the internal display of the Ally X. I left some warning notes in the description to reference. It works fine with an external display and the OneXgpu and with the Ally X by itself. Installing the August drivers will make everything work. Follow this guide step by step (and the links in the description) and it’ll work. 😊👌
Hey! There is a Jsaux for the Rog Ally X. I have a link to it in the description. Jsaux is half the price and a great product. It’s not as tight of a fit as the killswitch because Jsaux uses a much softer material. I don’t use the Jsaux anymore because my modded backplate doesn’t line up with the vent holes for Jsaux. I did like it though.
I just wish tomtoc would update their case for the X, its technically fits in the original, but its reeeeeally tight and puts pressure on the joysticks and r2/l2 that makes me uncomfortable
That would be nice… But it doesn’t extend far enough for that case unfortunately. You can see how far it goes in this Dbrand video around the 1 min 40 second mark: ruclips.net/video/NPYyBZIFHm0/видео.htmlsi=Dq47Fz0_qwUViNd7
Awesome! I had obsidian ordered and messaged them a couple weeks later to swap to carnage after remembering that was an option haha. You can order just the skin. If you pretend you’re buying the whole package, right before clicking on “Add To Cart”, directly under it (in small writing - no wonder we miss it) is “I don’t need the case”. If you click that, you can order just the skin. 🥳
@@GamingRepairs awesome! Will do this now haha! Can't wait to get more options for the Rog ally x. Thank you for answering my question, hope to see more content from you!
Great video thanks! Btw, have you watched Retro Game Corps vid about Rog Ally X using the Etsy Grips? Have you tried that one as well? Are they really that game changing? After watching your vid I ordered Killswitch, but now I am considering the Etsy Grips as well..
Thanks! 😊🫶 No, I haven’t watched his video yet but I did see the thumbnail pic and it looks similar to the 3D printed Etsy ones for the Legion Go. I had printed the Legion go ones and yeah, they were a lot better but the Legion go didn’t have any true grip options. I personally wouldn’t pull off my grippy full protection case (with sweat resistance too) on my expensive Ally X to rock only the plastic grips. I also don’t want to be taking the case in and off for travel protection and stretching it out. I’m assuming those are 3D printed ones too, right?
@@GamingRepairs I picked Triple Black! Apparently you can get that skin for free if you chose Warzone, Obsidian, or Acid skin… heck, if you get Xray Dark you will get the Light too. Ordered the skin on my phone so I was not able to notice that message. Only that I am viewing in my laptop now that I noticed the buy 1 take 1 skin on selected skins xD
@@GamingRepairs yeah thats definitely a big chuck of it lol. Have the cases you showcased affected your docking stations? I'm curious about the added thickness making them unusable.
I use the OneXGPU as my “docking station” which is just a Thunderbolt 4 cable to the Ally X with the kickstand out near it. The skull and Co will fit in some stand docks.
It should because of how tight it clips too and bottom. But, it wouldn’t cover the full front because the bottom right and left corners are angled to the grip. The skull & co grip doesn’t fill the space in those corners like the killswitch or jsaux ones.
@@GamingRepairs ahh, thanks for info. I think i’ll get the kill switch grip and the skull and co case. The front clip doesn’t look good and seems a bit unnecessary
I got the red one on AliExpress and black ones on Amazon. Here’s links to both: a.co/d/acUF8j3 16Pcs Universal Anti Dustproof Notebook Port Plug Silicone Protector USB Elastic Laptop Computer Cover Stopper a.aliexpress.com/_mK8LNlW
Hey! The red ones came from AliExpress but you can also get black ones from Amazon. Here are links to both: a.co/d/acUF8j3 16Pcs Universal Anti Dustproof Notebook Port Plug Silicone Protector USB Elastic Laptop Computer Cover Stopper a.aliexpress.com/_mK8LNlW
So upon receiving the Jsaux it didn’t fit right and I was pretty upset. It didn’t fit like the jsaux for the steam deck. After a couple days of leaving it on, it seemed to mold and form better and now it fit flush to the screen. Hope this helps someone.
@@derekdrozdzak mine is a solid straight line across the whole top. The entire case is snug. I use control freek thumb grips too with no issues. The top cover doesn’t have that snappy feel at the bottom like I think it should but it holds and sits flush to the screen now.
Just got my Killswitch today and I am quite happy so far. Found it by accident but glad i did, looks better than the others I've seen.
Which skin did you pick?
The JSAUX is really good the only issue is the fit on the top. It’s not completely snug which is a shame. JSAUX should add the flaps like the killswitch has
That is a shame that the fit isn’t as snug. The material is softer and more stretchy. Flaps would be nice to help keep the shape when installing. Their price point is great for the quality you get. Half the price of the killswitch.
This is really annoying me with this one too. Have you found anything that helps it fit better… someone said to manipulate it with heat like a hair dryer/ blower.
@@jadebrady5826 somebody said they used double sided tape to glue the top to the chassis.
@@YouJGSousa I’m not sure about doing that 😂
I’ve used this double sided tape. It’s not glued or permanent. It’s used for electronic screens. Comes off without residue and is high heat resistant. Here’s an Amazon link:
a.co/d/2O4QwfW
I just got the skullnco carrying case for the ally x. I had a really bulky one and honestly this one seems so good. Tysm for letting me see how slim it was
You’re welcome! That carrying case is great and solid quality. I also use it with the switch + Nexigo gripcon. 😁
I just ordered the killswitch for my ally x and I can't wait to get it! I ended up choosing the cotton candy skin.
That’s a cool looking skin! Great pick! 😁🙌🏻
The Skull&Co worked for me on OG Ally, and I think I will go with the same on Ally X. Awesome video, thanks for sharing!!!
You’re welcome! 😊💕
For the KillSwitch, the snap case gets a bit looser as you use it. What bugs me more is that you can't remove the kickstand. I almost want to cut it off. I have a nice Ugreen dock I can't use anymore because the kick stand get's in the way.
You might be able to knock that pin out with a pin punch enough to grab and pull it out. It looks like it can be knocked out from the left side to the right.
@@GamingRepairs Thanks. I was actually just looking into that. I think I am going to remove it.
Super honest review love it! I just got my kill switch the Rog ally x jsaux and once I turned it over the vents kinda bummed me out but saw another RUclipsr did a test and didn’t mess with it much but like he said it might kick the fans in some
Thank you! 💕 The Jsaux is really nice and half the price. I just wish they would open the vents up on the next ones.
@@GamingRepairs fr it is definitely nice I love it, needed it to have my Dj software on the go and with this I can start tossing it in my bag with a worry lol. I hope so but for now this will do, also naw thank you 🙏🏻
Great use case tossing the DJ software on it! 😎👌
@@GamingRepairs yea me and my friend started our journey producing music and hopefully perform at some underground’s soon than expected 😭. I started buying cases and covers for all my equipment to have ready to go and not worry. I had the asus Rog bag with the cheap zipper and not a hard case forgot all about my little machine that’s been helping me.
That’s awesome! Follow your dreams and taking the Ally on the journey with you. I know I’d be stoked to see an Ally next to the turn tables. 😁🫶
I really needed this video thank you I personally for the skull and co grip case for ally x on preorder but it should arrive soon.. can’t wait to see how they all differ
You’re welcome! The skull & co. is a great case. 😁👌
Awesome video thank you for comparing the three cases. I was debating which case to buy and looks like I’ll be going with the Killswitch.
You’re welcome! 😊
Finally someone talk about skull n co. Tq❤
You’re welcome! 😊🫶
Love the dbrand case with all the extras got mine yesterday 😊
Which skin did you pick?
@@GamingRepairs Light and dark circuit boards
@@cindytobben2269 The x-ray, nice! Which one did you install first? Or did you do a 50/50? 🤔
@@GamingRepairs50/50
Can’t wait for mine to show up. I’ve been sitting on USPS awaiting item for a few days 😂. I might try and give the skin a try this time
What skin did you pick?
Thank you for the video, I don't tend to drop my devices very often so my main purpose in getting one of these cases would be for grip purposes. I'm prone to getting sweaty hands when playing, can I ask which you would recommend for the best grip? It would be great if you could rank them from best to worst. Thank you :)
Hey! You’re welcome! My favourite is the killswitch for overall premium quality, tight fit, and full protection (I use the cover daily) with the best sweaty grip in my opinion because it’s the most course. If you skin the obsidian skin, they’ll also send you the triple black with it typically (2 for 1 skin pick). The killswitch just went on a Black Friday sale today.
My second would be the skull and co for the open back on the vents and comfort. Sweaty grip rating I’d give in par with the jsaux one. No kickstand but it can self stand upright with the flat bottom. No front cover but the best if you plan on replacing the back cover with an aftermarket coloured or transparent one when they eventually release. Probably will have a sale for Black Friday too.
The jsaux one is also on sale for Black Friday. Feedback on the Ally X one is that the top stretches when you put it on. Take a few days to retract but not quite snug. Has the front cover (which I love) and the grip is the softest. Again, sweaty grip rating not as good with the soft grip.
dbrand.com/shop/catalog/rog-ally-x
@ Wow, thank you so much! I really appreciate you taking the time to provide such a detailed reply. It definitely wasn’t necessary, but I’m incredibly grateful nonetheless.
You’ve totally sold me on the Killswitch, especially with the Black Friday sale, it feels like a no-brainer.
I can’t thank you enough! The least I can do is subscribe to your channel. I noticed you’ve owned a variety of portable consoles, including the OnexPlayer X1. I’d love to see a tier-list style video comparing it to devices like the SD and Ally. I’m really interested in trying one myself, but honestly, it’s totally outside my budget for a handheld.
Oh, and one last thing, how do you feel about the Dbrand screen protector? Does it negatively impact the experience compared to not using a screen protector at all?
Thanks again!
@calvin3941 You’re welcome! Thanks for the sub! I appreciate it. Spoiler, the full X1 is my favourite device but I have the Intel version because there wasn’t an AMD available at the time. So… I bought the X1 mini 8840u when they released it for the AMD experience - also great. Onexplayer is going to be releasing a new the X1 series with new AMD chips and I’ll definitely buy one of those. The Ally will always hold a special place in my heart and the Ally X filled it even more. It’s a such a solid travel, budget, and in country support friendly device for North America especially with the Best Buy store fronts.
I prefer the jsaux matte screen protector 2 pack(anti glare) over the dbrand high and price glossy glare single pack one. The case is really good with any screen protector. Amazon has the jsaux ones too and last prime day they were on sale so I expect they will be on Black Friday too.
I’m curious which skin you’ll pick? Haha
Yeah, my biggest complaint with the jsaux case is that the top lip doesn't grab the ally very well. It's raised ever so slightly and makes using the fingerprint reader annoying,
That is annoying. You could try some of this double side screen repair tape. It’s what I used to keep the Amazon one from lifting and snagging my RB button. I ran it along the power button edge near the screen.
a.co/d/aIBAx6p
Received the other day it’s a beast!
It is! 😁Which skin did you get?
@@GamingRepairs I went for obsidian!
Sweet! I loved that skin on my Legion Go. They gave you the triple black too, right?
@@GamingRepairs yes it also came with that! I had it on my short lived steam deck too lol
I recently purchased the jsaux case, and I'm regretting it. It doesn't fit all that well. However, I do like the mods on the back of the case. I think I'll get a dbrand in the future.
I’ve heard that the Ally X one stretches the top when you put it on then after a few days it should pull back to form still not tight though. Is yours loose on the top?
The dbrand one is a solid but comes with that premium price tag. I really like it though.
Thanks for making this video!
You’re welcome! 🫶
Awesome review!
Thank you! 🫶
Just got my Skull & Co for the X after loving it on my orginal Ally. And its great for its very cheap price. I do like the Killswitch a lot as it looks the cleanest of the bunch but that price tag is ridiculous compared to what you get with the Skull and Co. But then again its a euro device so its not that bad in comparison.
Yeah, the price is definitely at a premium compared to both the skull & co. and the Jsaux cases. Skull & co. is the only I still use with the original Ally. The open vents are great with my backplate and it’s really comfortable.
@@GamingRepairs Same here just sold my original Ally but used to Skull&Co on it because of those vents. How are the DBrand skins? Do those get loose over time? Never had one of those but tempted.
On my Legion Go it the skin starting to get loose after a few month. I don’t think this Ally X skin will have the same using when using with the killswitch case because the skin is “case hardened” and the killswitch is holding all the edge I had problems with deep under it secured tightly. But we’ll see lol.
@@GamingRepairs Yeaaah, just googled them and its in fact case only. Can't order just the skin alone that sucks lol.
They’ll have to change that eventually, right? What if I want to change up my skin? Interesting… 🤔
Would you consider making a video on how to (safely) update both One X GPU drivers, and Side loaded AMD drivers without having to start the process over from scratch?
Hey! I actually already have one and links to the current drivers are in the description. It’s a much shorter video than my “Fully loaded” Install Guide. 😊
ONEXGPU How To Install New AMD Drivers With Legion Go And Rog Ally X
ruclips.net/video/tYuo2eVdcWE/видео.html
@@GamingRepairs You are the GOAT. Thank you for everything you do.
🫶💕
@@GamingRepairs regarding your awesome updated video, for the Ally X, the process is still valid, and it's the same right? Something to be aware of like AMD Adrenalin software installed by default by Asus? Thank you for all your help testing and sharing your knowledge with the community.
Yes, the process is the same in the video for the Ally X install. The only catch is that there’s problem with the October Drivers and the internal display of the Ally X. I left some warning notes in the description to reference. It works fine with an external display and the OneXgpu and with the Ally X by itself. Installing the August drivers will make everything work. Follow this guide step by step (and the links in the description) and it’ll work. 😊👌
is there a jsaux for rog ally x? would it beat the killswitch bro? thanks for the review btw!
Hey! There is a Jsaux for the Rog Ally X. I have a link to it in the description. Jsaux is half the price and a great product. It’s not as tight of a fit as the killswitch because Jsaux uses a much softer material. I don’t use the Jsaux anymore because my modded backplate doesn’t line up with the vent holes for Jsaux. I did like it though.
I just wish tomtoc would update their case for the X, its technically fits in the original, but its reeeeeally tight and puts pressure on the joysticks and r2/l2 that makes me uncomfortable
Yeah, that’s no good. I use this one for tomtoc with all my handhelds except for the X1 (it’s too big). It’s not a hard shell though.
a.co/d/51YweYR
Does the skin included on the dbrand extend enough for the skull n co grip case? I like options hehe
That would be nice… But it doesn’t extend far enough for that case unfortunately. You can see how far it goes in this Dbrand video around the 1 min 40 second mark:
ruclips.net/video/NPYyBZIFHm0/видео.htmlsi=Dq47Fz0_qwUViNd7
@@GamingRepairs mine has finally arrived... i kinda want the carnage skin now :( I got the xray haha~! sad we cant order the skin alone
Awesome! I had obsidian ordered and messaged them a couple weeks later to swap to carnage after remembering that was an option haha. You can order just the skin. If you pretend you’re buying the whole package, right before clicking on “Add To Cart”, directly under it (in small writing - no wonder we miss it) is “I don’t need the case”. If you click that, you can order just the skin. 🥳
@@GamingRepairs awesome! Will do this now haha! Can't wait to get more options for the Rog ally x. Thank you for answering my question, hope to see more content from you!
Thanks! 💕
Great video thanks! Btw, have you watched Retro Game Corps vid about Rog Ally X using the Etsy Grips? Have you tried that one as well? Are they really that game changing? After watching your vid I ordered Killswitch, but now I am considering the Etsy Grips as well..
Thanks! 😊🫶
No, I haven’t watched his video yet but I did see the thumbnail pic and it looks similar to the 3D printed Etsy ones for the Legion Go. I had printed the Legion go ones and yeah, they were a lot better but the Legion go didn’t have any true grip options. I personally wouldn’t pull off my grippy full protection case (with sweat resistance too) on my expensive Ally X to rock only the plastic grips. I also don’t want to be taking the case in and off for travel protection and stretching it out. I’m assuming those are 3D printed ones too, right?
@GamingRepairs wow, you make a valid point. Will probably just wait for my killswitch case and skip the plastic 3d grips. Thanks!
You’re welcome! Which skin did you pick with it?
@@GamingRepairs I picked Triple Black! Apparently you can get that skin for free if you chose Warzone, Obsidian, or Acid skin… heck, if you get Xray Dark you will get the Light too. Ordered the skin on my phone so I was not able to notice that message. Only that I am viewing in my laptop now that I noticed the buy 1 take 1 skin on selected skins xD
If they haven’t shipped it yet, you can ask yo change to one of the others that it comes with. I had them change my obsidian to carnage.
I'm making a list of accessories for the ally x and its getting close to the cost of the ally x itself 😂
Yeah the hard drive upgrade itself is a big chunk. 4TB 2280 💰😂
@@GamingRepairs yeah thats definitely a big chuck of it lol. Have the cases you showcased affected your docking stations? I'm curious about the added thickness making them unusable.
I use the OneXGPU as my “docking station” which is just a Thunderbolt 4 cable to the Ally X with the kickstand out near it. The skull and Co will fit in some stand docks.
Does the rog x still fit in the skull and co case with the killswitch travel kit on?
It should because of how tight it clips too and bottom. But, it wouldn’t cover the full front because the bottom right and left corners are angled to the grip. The skull & co grip doesn’t fill the space in those corners like the killswitch or jsaux ones.
@@GamingRepairsso the case at 5:35 can’t fully zip up with a debrand travel kit on the ally x? If it can I wouldn’t mind getting both.
Oh I read that wrong lol. It fits perfect with the killswitch main grip minus the front clip cover in the skull & co travel case.
@@GamingRepairs ahh, thanks for info. I think i’ll get the kill switch grip and the skull and co case. The front clip doesn’t look good and seems a bit unnecessary
where did you get your USB-C plugs for the Ally X?
I got the red one on AliExpress and black ones on Amazon. Here’s links to both:
a.co/d/acUF8j3
16Pcs Universal Anti Dustproof Notebook Port Plug Silicone Protector USB Elastic Laptop Computer Cover Stopper
a.aliexpress.com/_mK8LNlW
@@GamingRepairs Thanks for this!!!
You’re welcome! 😊
I dont like the d brand screen protector it was way to glary . I prefer the matte ones like jsaux makes 😊
Yeah, I use the matte finish Jsaux one. Love it! 😁
Where did you get the dust covers for the X
Hey! The red ones came from AliExpress but you can also get black ones from Amazon. Here are links to both:
a.co/d/acUF8j3
16Pcs Universal Anti Dustproof Notebook Port Plug Silicone Protector USB Elastic Laptop Computer Cover Stopper
a.aliexpress.com/_mK8LNlW
So upon receiving the Jsaux it didn’t fit right and I was pretty upset. It didn’t fit like the jsaux for the steam deck. After a couple days of leaving it on, it seemed to mold and form better and now it fit flush to the screen. Hope this helps someone.
The stretch of getting it off takes some time to retract. Good to know. 👍
how was your top fit across the screen when you first got it vs now. is it still holding up pretty good and fit is good on the jsaux?
@@derekdrozdzak mine is a solid straight line across the whole top. The entire case is snug. I use control freek thumb grips too with no issues. The top cover doesn’t have that snappy feel at the bottom like I think it should but it holds and sits flush to the screen now.
@@NeighborOne sweet thanks for the feedback, thats good to hear
Is the kickstand removable?
Hey! No, it’s one with the shell. You could break it off and snip the clips it snaps into (when it’s not extended as a kickstand).
@@GamingRepairs Ha, was hoping I could pop a pin or something. Thanks for the reply.
Actually you might be able to pop the pin out. 🤔
Tomtoc sling bag or bust
That’s my favourite bag. All that extra space for accessories. 👌
Are you rocking no grip case on it in there? 😂
🙏🙏🙏
😁👍