BIG Turbo NON VTEC Civic EG Hatch Made Some Stink!
HTML-код
- Опубликовано: 11 сен 2024
- Check out my website
www.huntertune...
Need A Turbo?
Checkout www.turbo4less...
Hit me up for special pricing on any turbo you see :)
Follow me on social media
HunterTuned RUclips Facebook Group
/ huntertunedyoutube
Instagram : / huntertuned1
Snapchat : HunterTuned
Email : HunterTuned@gmail.com
Love watching huntertuned, sht my whole squad does !!!!!
Mine does too 😅
I have a Pulsar GTX3076R gen 2 on my D16 it’s basically a 5855 I’m happy with it I reved it to 6k in 3rd the other day just to see the spool response and it hit 23psi and it pulled really hard it’s tuned to 8k and 35psi you definitely have to find that perfect medium between too big and undersized
Oh yeah I forgot to mention it has a .82 ar exhaust housing
U look so much happier when someone brings u a legit car to dyno love it that tune was phresh 2 spec!!!!!!!!!
Stock b18a/b will take more than you think.
E85 stock blocks will take quite a bit.
Plenty of tunes to show it.
Your doing great and keep these videos coming, especially the one comparing the bigger and smaller turbos.
Love it, thanks for the videos, no matter how busy you always manage to get us some videos
Hey man. Can I see 400hp with just arp rod bolts and headstuds
You ever see this guy that made his own traveling wide band that would go into the end of any exhaust pipe. It consisted of a like 2" round pipe that was welded to a c clamp and the pipe would slide down into the exhaust at least 10 or 12" and the c clamp would clamp down onto the exhaust. The bung for the wideband was threaded onto the 2" pipe. Kind of hard to explain but ya
Yeah they're actually fairly common. They work OK on a short downpipe but any real length of exhaust it skews the readings.
@@BDauto86 no way really?? Can't remember if it was a Honda guy I saw do that or not? Damn so full length exhaust that's not gonna work ok, that didn't occur to me. The mixtures probably different that far down.
@@mitchweber7868 And yet they still use 'em to tune customers cars...yep.
@@boostismagic Ya that's no bueno.
That tq is nice and flat up top!
I can't wait to boost my gsr eg 4dr. I'm doing head gasket and arp studs soon then I'll be doing an ac line tuck cause I ant giving up ac.
Got me a B18b1 with gsr trans in my ek sedan. No way giving up AC and before boost going AWD.
FINALLY A TURBO COMPARISON ON A 90S HONDA ENGINE ON A DYNO BY SOMEONE I TRUST! DO IT! RICH HOLDNER IS THE SHT DUDE. BEEN WATCHING HIM SINCE THE MID 2000S
151st from the UK
69th from the USA
That hatch is going to move out hard! 350whp in a mazdaspeed 3 was very quick. Working on awd ek sedan with b18 built and boosted.
Have a great Saturday! 💪
I got a b20z almost the same set with 408hp and I have too say I love power curve awesome work brother
As always an awesome informative video. I always appreciate the little tuning tid bits.
Keep it up bro, love seeing you tune these older Hondas 🙏🏼🙌🏼🤙🏼
great video. Since you're thinking about taking a break from tuning others Hondas, a video on how to street tune for beginners would be super helpful!
I have a few of those already
Let's go!
Nice work maaan!!!💪🏼🔥🔥🔥
Very nice little setup there. Great numbers 👍🏼👍🏼
Idk if you noticed or not from inside the car but when you was revvin it up it was Poppin alil flame out the hood stack, pretty sweet lol
Yes sir lol
Man 353 on a stick b18 is good. I have an LSVtec (GSR head b18a1 with GSR trans) going to be buying a set of your injectors, run E85 with an eddlebrock intake, XS power turbo mani, and a little .58 trim turbo. I was going to try to get it tuned by you but I know your moving shops. I’m hoping to make 350-400 it’ll be a stock motor. 🤙🏻
This is what i wanna see hahah. Currently working on a eg sedan that's getting a turbo b18b haha. Shooting for 350hp myself 🤘🏼
About to check out that catch can and wastegate 🔥
Can't wait to see more of your builds
Keep the videos coming bud !!! When you can 🎉
not bad at all!
Great content great job man keep up the good work
Great job
Could the owner please post a video of the car driving from inside. Id love to hear it because I'm going for the same exact setup!
ruclips.net/user/shortsfVxUQG_Jfz0?feature=share
Every video I'm here
Hey man love the channel and all the knowledge you give on it I know you have been working on your z6 build and was wondering what you advise would be on running a light weight Flywheel vs a standard 18lb dx ex oem I do daily it but I drive the car I don't 🐈 foot around in it and looking to start all motor and then turbo later around 300 hp
So what size eBay turbo you recommend for a stock b20b…. Is a 47trim to small. Looking to get around 300-350hp using a top mount log mani
I’m torn on what I want to do. I have a single cam none vtec I’ve done most of the seals on it nothing internally replaced but I do want more power not sure if I want to buy another single cam and build it up a little or just get a b series and put head studs on it and make 300hp? Not sure what to do
Nice
I just got done turboing my d15, been trying to read online but everyone saying different things, is it normal for my turbo to not spin at all at idle. It seems normal and it pulls pretty hard and does spoil when you get rev it. Just curious if that is normal
👏👏👏👏👏
419 got a minute?
Mint!
Question how far down is that bung, just went too 4 inch and it’s wacked at idle now…. Overall 17.5 , 8 inches from impeller 7.5 from end ..
I’ve had 3 inch same placement it was fine tip was a little longer
And full 3 inch it was fine
??? Scavenging???? Only thing I can thing of besides the 6767 not moving enough volume at 1000rpm
Idk what to do besides my base being 1500
1000 rpm works after it adds then pulls
It’s that initial first bit
Its is stuffed literally no room for any thing longer wile keeping it nice and flush. The 3inch was more of a stack. I’d have to somehow do some r&r for the water return to have it come more inline like a Bseries
The weather is hear trying to at least make it once to the strip.
Forgot, another option , bung very close to the vband within an inch will that wreck the widband instantly?
I’ve tried everything yesterday first a single bung extension bored to full diameter then a second on top of that to keep it from ambient……..didn’t work
And sensor is in verified working condition
Hey hunter I’m all motor right now on a b20 non Vtec, I have the same issue of my idle jumping from like 300 to 900. What should I do to fix this?
Raise mechanical idle on the throttle blade
Hi, just gonna write it here out of fustration. If you have any opinion, it is wellcome. Pump gas like the good one we have around here. 6th headhasket d16z6. Last time I decked the block and the head, oem y8 gasket. Less that 20 degrees at 10psi, less than 10 degrees at 20psi over 6k rpm. Until then it ramps in. Afr 11.2-11.4. Until 19psi it seems like it was having it. I gave it 24 with 6 degrees of timing. If pissed itself. Any opinions?
The compression test shows 12 bar, like 180psi. Is this to high? Vitara with long rods
Single cams are tough. What exhaust manifold are you running? Is it a specific cylinder where the gasket is blowing? This is where EGT can really help.
@@HunterTuned tubular top mount made by me. Last time the fucker looked like it pushed the gasket everywhere it could push it, but not in between cylinders. It doesn't seem like it's a specific cylinder
I was thinking of puting standard lenght rods in it since I don't have e85 in my country
Sorry, but it's D curse..DSerious and others have fought that battle, going to bigger head studs, etc...too bad, those are cool blocks. Maybe go with it's big brother from an Accord?
I was always told with b serise 300whp to 350whp is reliable with a stock unopened b series but it does have to be in good shape and its hard to find a good one
Hey. You are the god of Hondas, I have a eg. One day I want you to put your salt and pepper to it, Enjoy your baby. We love you out here.
These vids are dope! Really informational I don’t think there’s anyone else doing it like you 🔥🔥🔥🤌🏼
🤘👌
Hey man I have a non VTEC b18, do you think it’s possible I can see 350hp with just arp headstuds and pump gas no e85
If you wanna put a rod through the block
Is this post or pre melt down footage?
Huh
If you had a Darton mid sleeved H22 fully built except it has stock valves, how much power and rev limit would you leave it at?
So its obviously built if it made 170hp n/a, b18b engine makes 142hp stock