Honing / Deglazing a CRF50 Cylinder

After ditching the crappy Chinese knockoff cylinder I needed another. I picked an old stock cylinder on Ebay and the bore was fairly glazed. Time to learn and practice a new skill!
Affiliate Links:
Cylinder Hone - amzn.to/3qn2Q2x
Follow me on Instagram!
/ garageaddiction
Tees & Stickers:
teespring.com/...
Music
Outro:
Retnik Beats | www.youtube/c/...
(As an Amazon Associate I earn from qualifying purchases at no additional cost to you. This is a great way to support the channel!)

[@willcountypowersports6338]

Nice little tutorial. The only thing I would recommend to stop the drill, decompress the tool and then remove it so it doesn’t fling out of there like that. And clean with soap and water until a white rag comes out clean

[@GarageAddiction]

Yeah good tip, I was a little concerned with stopping the hone in the bore but realistically it probably wasn't going to mess up the crosshatch.

[@jessebrown9046]

I like the stick hones way better then flex, I tried a 320 flex hone on my DT200 cylinder and I had to take the topend apart because the rings didnt seat, it dropped to 90psi after a couple kicks, it was likely to fine of grit but I can hone a cylinder mint with the stick hone medium grit

[@GarageAddiction]

Yeah after running this one through I'm pretty pleased with it!

[@TheChaz81]

Shit I'm definitely taking it to heart This is the only video I can find to show me how to do this It's all writing on you bud!

[@WilliamNyberg]

pretty much my exact situation, 'cept mine's an XL100s. good stuff

[@GarageAddiction]

Ah nice, good luck with it!

[@WilliamNyberg]

@@GarageAddiction thanks
UPDATE: it's back together, seemed to work perfectly, but now the carburetor gremlins have struck...

[@GarageAddiction]

@@WilliamNyberg Nice! Just need a carb clean perhaps?

[@WilliamNyberg]

@@GarageAddiction nah, it's jetting I think. brand new carb, see. (I also might have to fiddle with the timing)

[@chriauc2976]

more oil constantly that what you need its called honing oil SUNNEN

[@86z50r]

Thank you!

[@Bee-fr7zk]

I’ve sat here for a hour with that tool that did nothing lol

[@djnortz5449]

Did you go in both directions on the drill or just one?

[@GarageAddiction]

Just one direction

[@tuntony8787]

What size of the stick for that size of cylinder, Sir!

[@GarageAddiction]

amzn.to/3qn2Q2x - 1-2.5 inch, this was the exact one I used. Cheers!

[@robwinter3183]

Will this work on a 2 stroke cylinder?

[@GarageAddiction]

Only steel lined cylinders, it’ll destroy a nikasil plated cylinder.

[@lettuce953]

Did it turn out good?

[@GarageAddiction]

Turned out great, runs like a champ!

[@masonfrazee4039]

what brand honer?

[@GarageAddiction]

amzn.to/3qn2Q2x