That has got to be the worst repasting job I have seen. You left a frame of caked paste all around the die surface and the heatsink before applying a very generous dollop of fresh paste leaving nowhere for the surplus to spread out when you tighten the heatsink back onto the motherboard. That is going to leave a thicker layer of paste between heatsink and chip than otherwise and higher temps. Why go to all that trouble to strip a laptop down to the board only to do a half-arsed job? The only reason to do what you did is if you were going to use a conductive paste like AS5 but even then you would never have used anything like as much paste as you did and you would have applied it to the die surface and not the heatsink to make sure it didn't run over.
That has got to be the worst repasting job I have seen. You left a frame of caked paste all around the die surface and the heatsink before applying a very generous dollop of fresh paste leaving nowhere for the surplus to spread out when you tighten the heatsink back onto the motherboard. That is going to leave a thicker layer of paste between heatsink and chip than otherwise and higher temps. Why go to all that trouble to strip a laptop down to the board only to do a half-arsed job?
The only reason to do what you did is if you were going to use a conductive paste like AS5 but even then you would never have used anything like as much paste as you did and you would have applied it to the die surface and not the heatsink to make sure it didn't run over.
Repasted like a pro there 😂😂😂
Thanx man, ur video really helped me.. Thank u🙏🏻
i wish there was an upgrade to replace the fan with a better unit
Thank you very much 🥰
Thank u so much
How to enable TPM for this laptop?!
How to add extra ram
@EJAZ Hussain bro I tried, not fitting dell Inspiron 15R , new slot not seems ok, wts the solution??
I need mother board to my lab how can i got it 😭
My laptop doesn't turn on after I applied thermal paste power doesn't come it shows red light on the light area but laptop is not turning on
Did u solve the problem,i m a little bit scared,should i apply this
Remove battery and put it again my worked
Didn't changed the thermal paste 😂😂
That is exactly what I thought too. LOL!