Download all the workflows from the pixaroma-workflows channel on Discord. The links are also organized there. discord.gg/a8ZM7Qtsqq If you have any questions you can post them on discord or Pixaroma Community Group facebook.com/groups/pixaromacommunity
Since flux launched, I kept running away from it, due to how complicated it looked. You explained quite everything needed to get started. Thank you for this video!
bro you are crazyyyyy!!!! your contact this seires is a money based course for free, you are a very decent techer and i just binged the whole seires and discovered you uploded this right when i was looking for flux contant to get started!!! thanks alot i wish i could support you more
The way you explained this Flux model is clear and crisp 👍🏼👍🏼 Excellent, no really excellent step by step instructions 👍🏼👍🏼 I cannot explain how much this video means to me. Fantastic!! Oh, and you have a very pleasant voice. Thanks again!
I have to say that I really appreciate your help learning all of this. Your videos are very well made, detailed and informative. I have NEVER wanted to use ComfyUI and now I LOVE IT! I watched several videos and they always made my head hurt!! Yours made sense!! Great job! I'm looking forward to watching more of them... I know I am barely scratching the surface! 🤓
First time I ever send a tip on RUclips. Thanks for the amazing work, the way you share your knowledge with such great pedagogy is truly appreciated. I hope you continue to create this kind of video, which is very valuable and allows beginners like me to approach these topics without any friction.
This is the best flux beginner tutorial I have found on RUclips and it has everything I need to get started. Thank you so much! So it looks like FP8 might scratch my itch under most circumstances. What I am wondering about is, with most LoRAs available on the internet being generated against SD1.5 or SDXL, what am I gonna combine with Flux? Also, where could I find additional styles like you have in your CSV, which are recognised by Flux?
Check the episode 7 for styles and how to use it. Only lora made for flux will work with flux, you cannot combine them. And also I saw comfyui need converted lora for comfyui the default ones didn't work
Excellent tutorial series I watched so far for ComfyUI and FLUX. Great work and thank you! By the way, can you share how to make the animation at the end this episode? D-ID or Heygen?
Hello, that was very helpful but can i ask you why can't i queue the prompt on weight_dtype other than fp8_e4m3fn? It just becomes stuck on Load Diffusion Model and then ComfyUI just says Reconnecting while i don't recieve any specific message in console
Usually when it does that is run out off memory, so it is like it is crashing. So maybe is too much for your pc with other types. You can also try to add arguments in the run bat file like --lowvram to see if it helps
i tried f8, using a 4070 12gb card, with 32gb, and this is the second time it crashed. Not as violently as the 16bit version. I'm still not sure what i'm doing wrong. It also took forever trying to load. I bought more ram, i'm hoping that will help out here. I can only assume i'm still maxing out the ram. Maybe a bigger swap?
It shouldn't crash, i can run on 6gb of vram just takes a long time. Try looking up for gguf models and the nodes, there are like flux dev q4, q6, q8 and so on, start with q4 version and see if that one works, the workflow is a little different so search for a tutorial online first
Thanks for the video! I not sure what in doing wrong I've tried to use NF4 version and I had error of memory out in the first run the I re run it and its really slowly 82s/ it while (20 minutes per gen) using the f8 version with the unets takes 2 minutes per pic. I'm using a potato lap with 6gbvram with 32 gb RAM . Do you why is happening?
I dont know maybe is some settings or something wrong with the version, try again to update comfyui. I have the same problem with rtx2060 with 6gb of vram and 64gb of ram, it took me 6 minute on second generation and 9 minutes on first generation. I think with unet it loads all clip models separate and maybe that help. Maybe wait a little until things get more stable, since is all new, and i see new version coming out each day. I am still using sdxl hyper on my old pc just because is fast and get ok results :)) and on new pc i have only half second difference between dev nf4 and dev fp8 so for me didnt help much on new pc.
I just tried the forge ui, and updated like a few seconds ago, and form 6 minutes with schnell it takes only 27 seconds, so is fast, you can give it a try until is fixed comfyui maybe to see if helps ruclips.net/video/BFSDsMz_uE0/видео.html
you can use up to 2MP resolution, it can work quite well with different ratio compared with sdxl that if you go to high it start messing the composition. Just dont go to high and try to have width and hight divisible with 16 or 64, I saw it get better results. So for example I use 1368x768 then I upscale it to have it for youtube 16:9, but it can do also 1920x1080 but sometimes it can look a little blurry. Just keep in mind the bigger the size more time it will take to generate, and you need more vram to handle really big sizes.
@@pixaroma What can you recommend to improve photos (upscale)? So that nothing changes or changes minimally? Otherwise, some upscales change the details in the picture.
When i am in a hurry; just use the topaz gigapixel ai with sliders to a minimum :) in comfy UI i use ultimate sd upscale with low denoise. I plan to do a video for upscaling maybe next month with different methods so i will do more research then.
@@pixaroma Good! I've watched different videos and what the authors have is normal, it looks weird to me. Even watched the uses of the likes of 4x_NMKD-Siax_200k upscale.👍 topaz gigapixel I don't have it in the built-in. So I'll wait for this topic to be dealt with as well.🤔
@@Fayrus_Fuma topaz gigapixel ai is a paid software specialized on upscaling, is not in comfyUI. But I will do my research on different methods and I will present in a video my findings
ANYONE knows how to use control net for FLUX in FORGE? I get a model error if i use CANNY or DEPTH from XLabs-AI/flux-controlnet-collections 2024-08-17 21:38:29,461 - ControlNet - ERROR - Recognizing Control Model failed: C:\TEMP\FORGEFLUX\webui\models\ControlNet\flux-canny-controlnet_v2.safetensors
@@pixaroma yes, but on comfy i see tutorials that people actually need to wait 5 minutes for a schnell generation, on a 6GB VRAM card like i have, compared to FORGE that i can do a schnell generation in 20 seconds!!! so unless you have a comfy UI tutorial that makes a 6GB VRAM card works as fast as it does in FORGE, i might have to wait.... Is this comfy tutorial good for a 6gb Vram GPU?
Hi how can we use meta AI to generate prompt for the stable diffusion? Compare to chatgpt meta AI is more easy but I don't know how to ask for it to create an prompt for the stable diffusion? Can anyone please help me with that
I dont have access to meta ai, but in chat gpt I can do something like : give ma a prompt for stable diffusion for a cartoon cat digital painting And I get a Prompt: "A charming and playful cartoon cat with large, expressive eyes and a mischievous smile, sitting in a cozy living room. The cat has soft, fluffy fur in shades of orange and white, with a curled tail and small, pointed ears. The living room features warm lighting, a comfortable armchair, and a few scattered toys. The art style is vibrant and colorful, with smooth, exaggerated lines and a whimsical, lighthearted atmosphere."
@@pixaroma but we need to add something like negative Prompt right bro, So indepth we need to understand and to create an images using that so It is basically some know how to do it anyway thanks for the reply
@@DealazonDaily flux doesnt support negative prompt. And for sdxl you just add the words you don't need in the generation. Or you can use the art styles like I showed in the video
I had some problems with comfyui and had to reinstall on different folder because it took forever to load the model. Here are the results on the RTX060 6GB VRAM. First generation take longer because it loads the model, but after that is faster. flux1-dev-fp8 First generation time: 155 sec After that only: 113 sec flux1-schnell-fp8 First generation time: 63 sec After that only: 26 sec
@@pixaroma no luck for me on comfy ui, it takes 6 minutes compared to 1:30 minutes on forge!! same DEV fp8 model!!!! how did you manage to get so fast on comfy with 6gb VRAM?
Did you download from the link and used the workflows i shared? All who tested said it worked, try different models see if you get it to work, maybe you are using a workflow for different model or something, not sure
@@pixaroma it seems like this model wasn't very well built (It's kind of "beta"). I updated transformers, uninstalled torch an installed it again. updated comfy. Nothing helps. flux doesn't work, sdxl works perfectly.
Sorry it didn't work, besides trying different models not sure what to say, i tried on 2 different computers and on discord all seems to get it to work, maybe try installing in a different folder maybe it something that doesn't like in that current installation. Or try the other video with forge ui. I mean flux really worth a try since can do so nice graphics
On this video i cover that ruclips.net/video/0Pmfpoi3-A0/видео.htmlsi=MA21lIwQKIJCoyom for flux just use normal language, or chatgpt but is quite good at understanding
I saw on reddit a post saying it was running on it but a 512px image took 6 minutes for dev nf4, so is better to just use sd 1.5 models, or maybe sdxl hyper, until you get a better video card
Thanks for the info, i tested on 20 steps since it was the recommended steps for dev, and the NF was supposed to be the fastest so I didn't think to add more steps to make it less quick. So it is good to know it can do the same.
Milion tutorials how to use FLUX it in Comfy UI and very few how to set everything to work in normal UI for ordinary people and none how to use Controlnet with it without Comfy UI involved.
Forge Ui is still working on all the extensions and need more time to make it work, it all work, a1111 is also behind with updates, an comfyui works with flux from day one. There are starting to appear more flux control net but i am waiting for a unified model like we have on sdxl so i dont download a lot of models. Some from xlabs seems to work on comfyui. That why you dont find many tutorial because people didn't make it work yet, and when it works in next update fix something and mess something else, so people wait to be stabilized a little to get a more stable interface and so far comfyui is quite stable compared to others
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video Part 2!](http://i.ytimg.com/vi/JpT5Voak6WA/mqdefault.jpg)
Download all the workflows from the pixaroma-workflows channel on Discord. The links are also organized there.
discord.gg/a8ZM7Qtsqq
If you have any questions you can post them on discord or Pixaroma Community Group facebook.com/groups/pixaromacommunity
Since flux launched, I kept running away from it, due to how complicated it looked. You explained quite everything needed to get started. Thank you for this video!
Brilliant tutorial series !!! The best comfyui tutorial series on youtube by far ..
Can't wait to go professional with Flux - with your tutorials by my side.
Same just descovered all this stable diffusion/civitai/comfy/black forest lab mess yesterday and I am still blown away.
bro you are crazyyyyy!!!!
your contact this seires is a money based course for free, you are a very decent techer and i just binged the whole seires and discovered you uploded this right when i was looking for flux contant to get started!!!
thanks alot i wish i could support you more
thanks, glad I could help :)
The way you explained this Flux model is clear and crisp 👍🏼👍🏼
Excellent, no really excellent step by step instructions 👍🏼👍🏼
I cannot explain how much this video means to me. Fantastic!!
Oh, and you have a very pleasant voice.
Thanks again!
I have to say that I really appreciate your help learning all of this. Your videos are very well made, detailed and informative. I have NEVER wanted to use ComfyUI and now I LOVE IT! I watched several videos and they always made my head hurt!! Yours made sense!! Great job! I'm looking forward to watching more of them... I know I am barely scratching the surface! 🤓
I appreciate that, thank you 😊
Thanks for the tutorial. Really well explained and great editing.
First time I ever send a tip on RUclips. Thanks for the amazing work, the way you share your knowledge with such great pedagogy is truly appreciated. I hope you continue to create this kind of video, which is very valuable and allows beginners like me to approach these topics without any friction.
Thank you so much for your support, more tutorials are coming each week ☺️
Great tutorial series, very easy to understand. Thank you :)
Excellent tutorial, very detailed without being too complex. Thank you!
Thanks a ton for the amazing effort you put into your tutorials. They truly stand out!
really useful . thank you so much
yeahh finally got the proper updates! thanks very much!
Great tutorial. I always learn so much from your videos!! 😊
Impressive work and great video! Thank you very much!
Further as AI gose more creative we can be thank you for the update✌🏻
Great video! Thank you!
great video, I am going to install and try this today. I am currently using SD Forge to do some transparent bg images.
Thank you for this video. Very interesting for me
Thanks!
thank you so much 😊
Great video !😊
holy shit that's quality
great effort here
This is the best flux beginner tutorial I have found on RUclips and it has everything I need to get started. Thank you so much! So it looks like FP8 might scratch my itch under most circumstances. What I am wondering about is, with most LoRAs available on the internet being generated against SD1.5 or SDXL, what am I gonna combine with Flux? Also, where could I find additional styles like you have in your CSV, which are recognised by Flux?
Check the episode 7 for styles and how to use it. Only lora made for flux will work with flux, you cannot combine them. And also I saw comfyui need converted lora for comfyui the default ones didn't work
Thanks a lot!
E-boy! Still on the road, will watch the video in a couple hours.
Excellent tutorial series I watched so far for ComfyUI and FLUX. Great work and thank you! By the way, can you share how to make the animation at the end this episode? D-ID or Heygen?
I used image to video online on the Kling Ai website to get that animation
@@pixaroma Many thanks!
thanks very much, i have a problem : when i generete a picture it stucks : l after loarded completely in ksampler 0%__I 0/4 [00:00
Do you have enough vram? Maybe is too big for your video card. Does other models work like schnell?
Hello, that was very helpful but can i ask you why can't i queue the prompt on weight_dtype other than fp8_e4m3fn? It just becomes stuck on Load Diffusion Model and then ComfyUI just says Reconnecting while i don't recieve any specific message in console
Usually when it does that is run out off memory, so it is like it is crashing. So maybe is too much for your pc with other types. You can also try to add arguments in the run bat file like --lowvram to see if it helps
@@pixaroma yeah I was thinking of that, just opened performance screen and see that all of 32 GB RAM is gone. Thank you for the answer!
more, more more :! :))
How would you simplify their workflow?
I also find it needlessly complex.
I mostly use now the dev fp8. the workflow look similar to sdxl and the quality is good, I have more compact version on discord for those workflows
i tried f8, using a 4070 12gb card, with 32gb, and this is the second time it crashed. Not as violently as the 16bit version. I'm still not sure what i'm doing wrong. It also took forever trying to load. I bought more ram, i'm hoping that will help out here. I can only assume i'm still maxing out the ram. Maybe a bigger swap?
It shouldn't crash, i can run on 6gb of vram just takes a long time. Try looking up for gguf models and the nodes, there are like flux dev q4, q6, q8 and so on, start with q4 version and see if that one works, the workflow is a little different so search for a tutorial online first
Thanks for the video! I not sure what in doing wrong I've tried to use NF4 version and I had error of memory out in the first run the I re run it and its really slowly 82s/ it while (20 minutes per gen) using the f8 version with the unets takes 2 minutes per pic. I'm using a potato lap with 6gbvram with 32 gb RAM . Do you why is happening?
I dont know maybe is some settings or something wrong with the version, try again to update comfyui. I have the same problem with rtx2060 with 6gb of vram and 64gb of ram, it took me 6 minute on second generation and 9 minutes on first generation. I think with unet it loads all clip models separate and maybe that help. Maybe wait a little until things get more stable, since is all new, and i see new version coming out each day. I am still using sdxl hyper on my old pc just because is fast and get ok results :)) and on new pc i have only half second difference between dev nf4 and dev fp8 so for me didnt help much on new pc.
I just tried the forge ui, and updated like a few seconds ago, and form 6 minutes with schnell it takes only 27 seconds, so is fast, you can give it a try until is fixed comfyui maybe to see if helps ruclips.net/video/BFSDsMz_uE0/видео.html
I installed comy ui with the standalone build for Windows but I don't have the manager at the bottom any idea why?
Check episode 1 is a custom node that you must have installed since it is quite useful, after that it will appear
@@pixaroma Thank you, I will check all your episodes !
👍👍👍
How come I don't have the Manager button in my side menu?
Did you install it? Is it on episode 1
Yes I installed it following episode 1
Question - what resolutions can be used other than 1024*1024? Will the picture be deformed in the same way if I use 1280*720/1920*1080?
you can use up to 2MP resolution, it can work quite well with different ratio compared with sdxl that if you go to high it start messing the composition. Just dont go to high and try to have width and hight divisible with 16 or 64, I saw it get better results. So for example I use 1368x768 then I upscale it to have it for youtube 16:9, but it can do also 1920x1080 but sometimes it can look a little blurry. Just keep in mind the bigger the size more time it will take to generate, and you need more vram to handle really big sizes.
@@pixaroma What can you recommend to improve photos (upscale)? So that nothing changes or changes minimally? Otherwise, some upscales change the details in the picture.
When i am in a hurry; just use the topaz gigapixel ai with sliders to a minimum :) in comfy UI i use ultimate sd upscale with low denoise. I plan to do a video for upscaling maybe next month with different methods so i will do more research then.
@@pixaroma Good! I've watched different videos and what the authors have is normal, it looks weird to me. Even watched the uses of the likes of 4x_NMKD-Siax_200k upscale.👍
topaz gigapixel I don't have it in the built-in. So I'll wait for this topic to be dealt with as well.🤔
@@Fayrus_Fuma topaz gigapixel ai is a paid software specialized on upscaling, is not in comfyUI. But I will do my research on different methods and I will present in a video my findings
ANYONE knows how to use control net for FLUX in FORGE? I get a model error if i use CANNY or DEPTH from XLabs-AI/flux-controlnet-collections
2024-08-17 21:38:29,461 - ControlNet - ERROR - Recognizing Control Model failed: C:\TEMP\FORGEFLUX\webui\models\ControlNet\flux-canny-controlnet_v2.safetensors
I saw someone using them in comfyui, don't think it work yet with forge
@@pixaroma yes, but on comfy i see tutorials that people actually need to wait 5 minutes for a schnell generation, on a 6GB VRAM card like i have, compared to FORGE that i can do a schnell generation in 20 seconds!!! so unless you have a comfy UI tutorial that makes a 6GB VRAM card works as fast as it does in FORGE, i might have to wait....
Is this comfy tutorial good for a 6gb Vram GPU?
✨👌💪😎🤗😎👍✨
Sir, your tutorial is great. will you teach about Control Net?
yes, i will do first for sdxl controlnet, and on later videos when more controlnet appear for flux for that as well
@@pixaroma Thank you very much, and I wish you a happy life.
where did you get this prompt styles selector and styles 😬
Check the episode 7 I explained everything there, they styles file I created and i use some custom nodes to load the file
hi, after update i got white screen...
Try to update again maybe, what it says in the command window? What error?
Hi how can we use meta AI to generate prompt for the stable diffusion? Compare to chatgpt meta AI is more easy but I don't know how to ask for it to create an prompt for the stable diffusion? Can anyone please help me with that
I dont have access to meta ai, but in chat gpt I can do something like : give ma a prompt for stable diffusion for a cartoon cat digital painting
And I get a Prompt: "A charming and playful cartoon cat with large, expressive eyes and a mischievous smile, sitting in a cozy living room. The cat has soft, fluffy fur in shades of orange and white, with a curled tail and small, pointed ears. The living room features warm lighting, a comfortable armchair, and a few scattered toys. The art style is vibrant and colorful, with smooth, exaggerated lines and a whimsical, lighthearted atmosphere."
@@pixaroma but we need to add something like negative Prompt right bro, So indepth we need to understand and to create an images using that so It is basically some know how to do it anyway thanks for the reply
@@DealazonDaily flux doesnt support negative prompt. And for sdxl you just add the words you don't need in the generation. Or you can use the art styles like I showed in the video
@@pixaroma thanks actually I am using stable diffusion so that's why I am asking for this thanks
ok so in minute 7:18 you mention that on a 6Gb GPU it takes 5 minutes to generate 1 image?
I am at that old pc rtx2060 6gb of vram, and 64gb of system ram. I updated the comfyui and I am redoing the test. I will get back to you with results
I had some problems with comfyui and had to reinstall on different folder because it took forever to load the model.
Here are the results on the RTX060 6GB VRAM. First generation take longer because it loads the model, but after that is faster.
flux1-dev-fp8
First generation time: 155 sec
After that only: 113 sec
flux1-schnell-fp8
First generation time: 63 sec
After that only: 26 sec
@@pixaroma nice!! lot better... is this using your tutorial for comfy ui?
@@liquidmind yes
@@pixaroma no luck for me on comfy ui, it takes 6 minutes compared to 1:30 minutes on forge!! same DEV fp8 model!!!! how did you manage to get so fast on comfy with 6gb VRAM?
didn't work. I get "module 'torch' has no attribute 'float8_e4m3fn'" than I try to use this checkpoint
Did you download from the link and used the workflows i shared? All who tested said it worked, try different models see if you get it to work, maybe you are using a workflow for different model or something, not sure
From what i saw online you could try to fix it by updating pytorch
Try also update comfyui and dependencies bat github.com/comfyanonymous/ComfyUI/issues/4297
@@pixaroma
it seems like this model wasn't very well built (It's kind of "beta"). I updated transformers, uninstalled torch an installed it again. updated comfy. Nothing helps. flux doesn't work, sdxl works perfectly.
Sorry it didn't work, besides trying different models not sure what to say, i tried on 2 different computers and on discord all seems to get it to work, maybe try installing in a different folder maybe it something that doesn't like in that current installation. Or try the other video with forge ui. I mean flux really worth a try since can do so nice graphics
Could you Please make a tutorial about Prompting for image generation.
On this video i cover that ruclips.net/video/0Pmfpoi3-A0/видео.htmlsi=MA21lIwQKIJCoyom for flux just use normal language, or chatgpt but is quite good at understanding
Can run on GTX 1070? 32gb ram?
I saw on reddit a post saying it was running on it but a 512px image took 6 minutes for dev nf4, so is better to just use sd 1.5 models, or maybe sdxl hyper, until you get a better video card
@@pixaroma thanks bro
NF4 was compared incorrectly; at 30 steps there is no difference.
Thanks for the info, i tested on 20 steps since it was the recommended steps for dev, and the NF was supposed to be the fastest so I didn't think to add more steps to make it less quick. So it is good to know it can do the same.
Milion tutorials how to use FLUX it in Comfy UI and very few how to set everything to work in normal UI for ordinary people and none how to use Controlnet with it without Comfy UI involved.
Forge Ui is still working on all the extensions and need more time to make it work, it all work, a1111 is also behind with updates, an comfyui works with flux from day one. There are starting to appear more flux control net but i am waiting for a unified model like we have on sdxl so i dont download a lot of models. Some from xlabs seems to work on comfyui. That why you dont find many tutorial because people didn't make it work yet, and when it works in next update fix something and mess something else, so people wait to be stabilized a little to get a more stable interface and so far comfyui is quite stable compared to others
git pip lots of somethings that i do not know.
If you still have problems installing tag me a message on discord ☺️
there is new flux model which is more faster
What is the name of the model? I have delayed this video a few times because each day i found a new update 😂
@@pixaroma lol , i just checked the vid you have it already 😁