Please I have a new 6kg gas cylinder but the burner does not ignite, I tried the burner with another cylinder and it works well. What could be the problem?
τέλειο το γκαζακι στην Ελλάδα υπάρχουν οι φιάλες μίγμα προπανιου βουτανιου της CORAL GAS με ειδική βαλβίδα ασφαλείας FLV και έχει βγει ή νέα φιαλη μίγμα προπανιου βουτανιου τού εμπορίου 10 κιλών οικιακής χρήσης και κουμπώνει μόνο με ένα κλικ με ειδικό ρυθμιστή πίεσης της CORAL GAS PRIME και φιαλη προπανιου 10 κιλών επαγγελματικής χρήσης πού κουμπώνει μόνο με ένα κλικ με ειδικό ρυθμιστή πίεσης της CORAL GAS PRIME με ειδική βαλβίδα ασφαλείας FLV και δεύτερη βαλβίδα ασφαλείας υπερβολικής ροής PRV για μεγαλύτερη ασφάλεια υπάρχει βίντεο στο γιου τιουμπ CORAL GAS PRIME δείτε το βίντεο.
Please read my main comments and follow my procedure. Thank you. You can use steel wool or scotch bright to mildly take off the dirt with a liquidity soap degreaser. If it is rusty but still firm , you can use some finer sand paper and take the rust off. Then paint it with a can of heat resistant silver or chrome spray. You can plug the holes with toothpicks to avoid blockage by the spray paint before you spray it. Let it dry properly before use. Don't do this if the burner cap is rusty and falling apart , you rather buy a new one. You can also sandpaper a rusty gas cylinder and spray it with grey or red primer , then spray it with the original or your choice of colour. " If the metal is too thin on the cylinder at any spot (deep corrosion by rust) , don't execute this method, it's safer to buy a new cylinder. 👍👍👍👍
If it is water, water alone cannot block the nipple on the control but if it does the same procedure applies. Water can only wet the burner cap, just get the cap dried it will start working again. Thanks
Thank so much you saved me from buying the new one I'm grateful👏👏👏👏
God bless you for this video baba...You can't imagine the stress you just saved me now
Thanks so much u have just saved me from buying another burner ❤❤
Welcome
Thankyou dawg for helping out. My gas is now start working. Love & thanks from India!! 🇮🇳🙏🖤
Thanks
Thank you Soo much. You're just the best among all videos I saw on RUclips
Welcome bro
I found it helpful. Thank you very much🙏
Thanks for this tip. It really worked for me!
This video helped me this night I'm grateful
Thanks so much I love your video.
Thanks. Helpful. Sorted by burner out
You saved me this morning thank you so much, it really works
Thanks so much 😊 i just tried mine and voila 🎉it worked.
Thank you for posting this, Looked a long time to find a video that teaches how to fix this burner type.
Please read my main comments and follow my procedure. Thank you. 👍
Welcome
Thank you for this. I was thinking of buying a new burner but I tried this and it worked.
Thanks for the help
It works brother 💯% thank you very much
Thank you so much this really helped
Thanks brother. You saved my Life. You just got a new subscriber
Thank youuuu
I loved it. Many many thanks.
Welcome
Great vid. Thank you 👍
Thank you very much for this it really helped me
Thanks you alot your video helped me
Thank you
Thank you very much
Thanks a lot, this really works 💃💃💃
Thank you so much. You just helped me to save N2,000.
Welcome dear
God bless you man 👍
Thanks for teaching.
Please read my main comments and follow my procedure. Thank you. 👍
Welcome
Wow very nice, I like how you speak 😂 clean Explanation 👍
Thank you it’s work ,
Thanks for this 👍
Thanks it worked!
Awesome video
Thanks a lot
Thanks for saving me out🙏
Thank you!
Thank God for this
After a year it's still valid
It just helped me this morning
Welcome
Woww thanks a lot 💥💥
Thank you sir ❤
Welcome
Nice one man
Nice one bro 🙏
😭😭😭😭u just saved me from starvation
Well explained
Please read my main comments and follow my procedure. Thank you. 👍
Thanks
Thanks man 😂 I have similar problem
Tnk u
Thank you so much, I almost bought a new head
Thank you Ikenna.
Stucked in d kitchen coz of this,thanks alot
The flame goes low and high(back and forth)in mine.will this fix it too?
Please I have a new 6kg gas cylinder but the burner does not ignite, I tried the burner with another cylinder and it works well. What could be the problem?
What if the hole on it is blocked, what can one do
τέλειο το γκαζακι στην Ελλάδα υπάρχουν οι φιάλες μίγμα προπανιου βουτανιου της CORAL GAS με ειδική βαλβίδα ασφαλείας FLV και έχει βγει ή νέα φιαλη μίγμα προπανιου βουτανιου τού εμπορίου 10 κιλών οικιακής χρήσης και κουμπώνει μόνο με ένα κλικ με ειδικό ρυθμιστή πίεσης της CORAL GAS PRIME και φιαλη προπανιου 10 κιλών επαγγελματικής χρήσης πού κουμπώνει μόνο με ένα κλικ με ειδικό ρυθμιστή πίεσης της CORAL GAS PRIME με ειδική βαλβίδα ασφαλείας FLV και δεύτερη βαλβίδα ασφαλείας υπερβολικής ροής PRV για μεγαλύτερη ασφάλεια υπάρχει βίντεο στο γιου τιουμπ CORAL GAS PRIME δείτε το βίντεο.
Is there a way to clean the burner cap?
Please read my main comments and follow my procedure. Thank you. You can use steel wool or scotch bright to mildly take off the dirt with a liquidity soap degreaser. If it is rusty but still firm , you can use some finer sand paper and take the rust off. Then paint it with a can of heat resistant silver or chrome spray. You can plug the holes with toothpicks to avoid blockage by the spray paint before you spray it. Let it dry properly before use. Don't do this if the burner cap is rusty and falling apart , you rather buy a new one. You can also sandpaper a rusty gas cylinder and spray it with grey or red primer , then spray it with the original or your choice of colour. " If the metal is too thin on the cylinder at any spot (deep corrosion by rust) , don't execute this method, it's safer to buy a new cylinder. 👍👍👍👍
Hi brother
What if it was caused by water?
If it is water, water alone cannot block the nipple on the control but if it does the same procedure applies. Water can only wet the burner cap, just get the cap dried it will start working again. Thanks
Hello sir maybe how much this burner many LPG sir
My first thought was needle🤣🤣🤣
Is this type safe to use?
Please read my main comments and follow my procedure. Thank you.👍👍👍👍
your teaching is good, but try to be professional in it
tell them to disconnect the camping burner from the cylinder before working on the burner
Thanks
That's alot
Welcome
You guys just ensured a military 🪖 man in the camp cook this morning
Thanks
thanks man this video helped me a lot 🥹❤
Thank you!
Welcome dear
Thank you
Thank you
Welcome