BMW
HTML-код
- Опубликовано: 1 окт 2024
- Installing the bobber kit
Set, bobber 77 31 2469290 1pc
Cable splitter bobber ECE (Bobber) 77 53 5A59EE3 1pc
LED turn signal and tail light comb. (Bobber) 77 51 5A59913 2pc
Adhesive pad reflector ECE (Universal) 77 31 5A6D636 1pc
Cable connector (0.2-0.5 mm²) 61 13 8353746 7pc
Shrinking hose (6x45mm) 61 13 5A4F528 7pc
Thread lock, medium-strength (10ml) 83 19 2210339 1pc
for USA
Set, bobber 77 31 5A1CBB7 1pc
Kit adhesive pads reflectors USA (Universal) 77 31 5A6B114 1pc
Cable splitter bobber USA (Bobber) 77 53 5A66382 1pc
Cable connector (0.2-0.5 mm²) 61 13 8353746 6pc
Shrinking hose (6x45mm) 61 13 5A4F528 6pc
Thread lock, medium-strength (10ml) 83 19 2210339 1pc
Select matching drill patterns for number plate on carrier plate:
A → Number plate 280 x 200 mm
B → Number plate 220 x 200 mm and 200 x 200 mm
C → Number plate 180 x 200 mm
Drill diameter carrier plate 4.5 mm
The cables of the multifunctional turn indicators and wiring harness must be connected in accordance with the following table:
Ground
Black (connect left and right) --- Brown
Turn indicator + left
Grey --- White
Turn indicator + right
Grey --- Black
brake light +
Grey/red (connect left and right) --- Red
Rear light +
Grey/white (connect left and right) --- Yellow
The cables of the multifunctional turn indicators and wiring harness must be connected in accordance with the following table: (USA!!!)
Ground
Brown --- Brown
Turn indicator/brake light/tail light
Blue --- Black (right)/white (left)
P.S The remaining cables of the additional wiring harness are not required.
Before connecting the cables firmly, check the function of the turn indicators with a temporary connection.
Cut the individual cables and their counterparts in staggered lengths by the approximate length of a heat shrink tube so that cable connections are not next to each other.
The cables of the number plate light and wiring harness must be connected in accordance with the following table:
Ground
Black --- Brown
Power supply
Red --- Blue
Can show us how to install fog light for R18 please
Еще хочется колеса на него немного другие, на перед 23 (хотя бы 21), а на зад 200/55 r 18
да, 21 спереди смотрится классно!
reikaluose visas
užklasinė veikla :)
Как насчет задней подвески, можно ли установить амортизатор с чуть большей амплитудой, чтоб увеличить ход подвески?
Can you help me to make my bike like that
I tried to explain everything in the video and I think that you can do everything yourself.
Or do you have any questions?
Привет. Когда приготовишь видос, про регулировка клапанов на s1000.... Жду с нетерпением ❤...
я не забыл :)
@@SpeedAndAdventure
Dobri den, vi ne smogli pomoch mne i skazat che vizivaet pereboi ? Y menia R18 fist edition i tolko 1000 miles probeg. 2 raza bilo pereboi
Привет! Какие у Вас перебои? Вы чувствуете это от двигателя?
@@SpeedAndAdventure da chystvyu osobena kagda zavidy no bivaet ne chasto. Ia zalivau venzin super 98 mojet eto deistvyet ?
@@tengizbendukidze1872 а зачем 98? Ему хватает 95. Таких проблем не наблюдалось... если перебои будут повторятся- зафиксирует ошибку, так проще будет смотреть в чем дело.
@@SpeedAndAdventure ok, sposebo 🙏 bydy nubludat i zalu 95
I have just bought the same kit to do myself so thanks its the most comprehensive video I have seen so helps loads.
Where can you buy this kit I'm in the US also exhaust
Woooow...very, very nice kit. Thanks for showing us these videos and deciding whether to change the look of our beautiful R18s.
Congratulations for the video really very nice and full of technical content.
See you next video ✌
The video turned out to be long, I'm tired of shooting,
For the US market, the original turning lights must be left.
Cut off the connections from them and connect to the wire from the kit.
Приветствую. Как всегда ваш труд на высоте. Видос с удовольствием зашёл. Очередной лайкос.
Спасибо!
Как всегда, класс👍
Спасибо!
Привет из Беларуси! Видео для меня супер полезное, прямо то что искал, очень круто!
Привет из Литвы!
Очень жаль, что нет сравнения фото посадки до и после, только по ощущениям.
Почему крыло не заклеиваете плёнкой на время монтажа? Один раз ему досталось от сидушки 😁
честно говоря монтировать нужно вдвоем- жесть как неудобно было одному прикручивать крыло.... Да, ему досталось, но повезло- не поцарапал :)
какой чистый авто сервис и мастер работает по правилам производителя
это только для видео, реальность совершенно другая....
шутка :)
Подьемник класс
да, служит безатказно :)
👏😉💪😃🤘🤓👍😎💣💣💣💣💣💣💥💥💥💥💥🚀🚀🚀🚀🚀🚀🏍
👍😎
Спасибо!
и Вам )
a double saddle ?
no, only single.
😢 "Promo sm"
All so that you can service your motorcycle yourself.
@SpeedAndAdventure Hows that red color on R18 in person ? I am picking between Red and Manhattan Green . Pictures are not doing them justice I think.
Yes, the color is bad in the photo. My personal opinion is that red is beautiful on the first impression, but over time it becomes "more red" for you. I still think that the green will be more beautiful.
@@SpeedAndAdventure thanks i think so too. Getting green one next Monday!