How to Replace Headlight Assemblies 2008-16 Chrysler Town & Country
HTML-код
- Опубликовано: 4 фев 2020
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/19/cJ/headlight-asse...
Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle. This video shows you how to install new, quality, TRQ headlight assemblies on your 2008-16 Chrysler Town & Country
• Check here for more videos on the 2008-16 Chrysler Town & Country • Chrysler Town & Countr...
This repair was done on a 2013 Chrysler Town & Country and the process should be similar on the following vehicles:
2008 Chrysler Town & Country
2009 Chrysler Town & Country
2010 Chrysler Town & Country
2011 Chrysler Town & Country
2012 Chrysler Town & Country
2013 Chrysler Town & Country
2014 Chrysler Town & Country
2015 Chrysler Town & Country
2016 Chrysler Town & Country
Tools you will need:
• Phillips Bit in a Ratchet
• Pocket Screwdriver
• 10mm Socket 1aau.to/oQe/1AXAA00017
• Trim Tool Set 1aau.to/osY/1AXXX00006
• Side Cutters
• Drill
Subscribe: / @trq
Check out our playlist:
Chrysler Town & Country 2008-16 5th Gen: • Chrysler Town & Countr...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Thanks, very clear tutorial. Someone at Chrysler must have been drunk when they designed the headlamp replacement procedure.
All that work to get to the headlight. Overkill engineering or what!
+passtheparcel2007 Thanks for the feedback! 1aau.to/m/Shop-TRQ
Excellent video. Made it very simple. Disassembly, install and reassembly done in less than an hour. The only thing I did different,was that I turned the fog light bulb from the housing instead of unplugging it. Made it easier since I didn't have a lift and easy to twist back on afterwards. Thanks so much for this video. You saved my day. It looks challenging, but it truly wasn't bad if you just take your time. Easier than expected.
I"m not sure what was better, the headlight install or the adjustment. Best explanation I have seen. Cheers!
I just completed this install. Thank you!!!
Thanks for the video...didn't end up having to remove the entire front shroud, you saved the day sir!
He removed the front shroud.
Thank you, this was very helpful.
Thanks! I’m going to need these for my 08 T&C (water damaged headlight housing).
Keep it simple. Perfect. Thanks.
Worked out great. Thanks.
Awesome video! Very helpful!🤟🏻🤟🏻🤟🏻
Did anyone else notice how he said vehicle
Veer hicle
@@jhstieglitz yeah does he say it like that
He talks normal otherwise but what the hell
what a joke it is to change a headlight.
Thank you!
Very helpful thank you
Nice video. I did see that the marker light at the amber cover had no bulb. You reattached the wire without a bulb. Is that standard for this vehicle? Thanks.
Thank for the Help!!! Awesome
Do you have to jack it to get the front bumper off ? Hoping I can do this alone but I don't have a jack
Thanks man. No thanks Chrysler 4 the pain the neck disassembly of the front clip just a replace headlight assembly. Could have just put some access holes in the front with plastic caps on top of them. Maybe I'll just live with the old headlamps with the water inside of them. Sounds like a big deal to just do this job. I suppose I got to buy a new push pins those plastic pieces. Oh yeah yeah yeah
What is the part called of the bracket at 1:25 when you unscrew the headlight assembly? (bracket holding the headlight assembly that spans from left to right) Looking to buy a replacement as it broke from a deer hit but not sure what it is called.
Did you ever find this information out, need the same thing
Chrysler can't you make it easier????
Has anyone tried cheaper headlights. They can be found much cheaper on ebay and elsewhere, but will they fit properly and work?
Hi would you know why my HID bulb on o,s, front,won't light up? Bulbs are working 😢
+@markking8801 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
This guy says "buricle" "nuculur"😂
He has to be doing it for extra comments right. You can't miss it.
Mopar doesn't make it easy do they.
Is he saying veerhicle
R5
This is over the top. Why so much disasambly?? I'll buy the lens restorer.
Totally ridiculous. Thought the bolt on top would be it like a normal common damn sense vehicle. Came here to see what was holding it up.
Vearicle hahaha ...that's most certainly not how you say it
+Burnt Mcgurnt Thanks for watching our video! 1aau.to/m/Shop-TRQ
Good video but horrible design - 2007 and before they easily just slide out 😱