@@Tklatti01 This fog lamp only used the case, but the inner led is different. ko.aliexpress.com/item/1005005367222198.html?spm=a2g0o.order_list.order_list_main.59.5fc2140faFVKuh&gatewayAdapt=glo2kor ko.aliexpress.com/item/1005004940553887.html?spm=a2g0o.order_list.order_list_main.74.5fc2140faFVKuh&gatewayAdapt=glo2kor The LED chip is big, so it just doesn't fit. The substrate needs to be cut out a lot, and new soldering needs to be done. It should also be equipped with 150 ohm resistance. ko.aliexpress.com/item/1005005486442062.html?spm=a2g0o.order_list.order_list_main.104.5fc2140faFVKuh&gatewayAdapt=glo2kor The step-down module must also replace the resistance with 0 ohm. The work will not be easy.
Were did you get the extra lights!?
Hi bro
I added a fog lamp.
The power of the fog lamp 12v could be obtained by installing a separate 100v to 12v converter.
Good luck
@@RCSpectrum thanks for the reply. You happen to have any links to those items?
@@Tklatti01 This fog lamp only used the case, but the inner led is different.
ko.aliexpress.com/item/1005005367222198.html?spm=a2g0o.order_list.order_list_main.59.5fc2140faFVKuh&gatewayAdapt=glo2kor
ko.aliexpress.com/item/1005004940553887.html?spm=a2g0o.order_list.order_list_main.74.5fc2140faFVKuh&gatewayAdapt=glo2kor
The LED chip is big, so it just doesn't fit.
The substrate needs to be cut out a lot, and new soldering needs to be done.
It should also be equipped with 150 ohm resistance.
ko.aliexpress.com/item/1005005486442062.html?spm=a2g0o.order_list.order_list_main.104.5fc2140faFVKuh&gatewayAdapt=glo2kor
The step-down module must also replace the resistance with 0 ohm.
The work will not be easy.
레드님 맞으시죠??ㅎㅎ까페잘보고 있습니다ㅎ프로 구매예정이라 관심있게잘보고있어용
@@Sspong 신지신지 누구신지요.ㅋ
맞습니다.
@@RCSpectrum 아ㅋㅋ까페 눈팅만 합니다 ㅎㅎ레드님처럼 튜닝하고싶다고 늘생각하는데 똥손이고 보니까 레드님한테 부탁드리고싶지만 업체가아니라 개인이신거같아서 부탁도 못하겠고 그렇더라구요ㅜㅜ솔직히 업체보다 더 잘하시는거같아서ㅎㅎ
업체가 더 잘하시죠.ㅋ
저는 제꺼니깐, 하고싶은대로 해보는거지요.
어제는 논산가는길 인터넷 고등학교에서 대전 집까지 장거리 라이팅 했습니다.
재밌게 잘타고 있어요.ㅋ
항상 안전라이딩 하세용.^ ^