I put a 2” leveling Bilstein shocks on my truck with 1” rear spacers. Got about little over a inch of rake and then installed AirLift 5000 bags. Looks good.
@@MarkBrenner its good no issues. I did the install myself but beware if you do the Airlift bags you have to cut off your bump stops. So no going back. I got the bags with a inner jounce in them so they act like bump stops.
Man, you should of went with a BDS/Zone lift. God for bid something happens with the truck and needs warranty, an the dealer trys to not cover it, BDS/Zone will send a team of layers to fight them on their dime not yours, because they put so much R/D into making their kits meet the same standards or better. Truck looks killer!!!!
Great content mark ! Everything on point and you are right about braking as I had issues with stability on my 4th gen ram post lift. Switched to rebel 12 now and 3.5 sst is on its way, love the wheel choice man - stay safe !
Not into lifts that much but your height would be the maximum height for me. The truck looks super nice though and can't wait to see which wrap you pick.
How is the ride quality after a few a while with this ReadyLift setup? I'm looking to get the same kit but been reading mixed reviews on rough rides vs. not a major change compared to stock.
Oh man here comes with dodge electrical issues! Great Video! What drone is that? Also, large lift kits on IFS trucks is pretty stupid. Did a 6" on my old 2008 Silverado 3500 dually. Had to cut mounts and weld in sections. Total pain in the ass. Now if you're in a HD truck with Solid axle front and rear, lifts are very easily reversed if desired.
I just ordered a 2020 Ram 1500 Bighorn (Black with Night Edition). I plan on putting a 3.5” lift kit and 33” tires (Nitto or Toyo). If you could do it all again, would you stick with the Readylift SST? If u can have any lift brand/kit, if money is no issue, what would you pick? After I get the lift and tires, anything you think needs to be updated/replaced for the best system?
I've thought about the mopar 2 inch for warranty reasons. the readylift has a 100K powertrain warranty included with their lift.......dont go anywhere else
Is there a particular reason you went with the 34s over the 35s? I have the same exact lift and went with the 295s as well. Lol regretting not getting the 35s🙄
check out a video online comparing rough country hardware to ready lift hardware. Its crazy how cheaply made, not beefy the rough country stuff is to the ready lift parts
Already having issues with a BRAND new truck??? You should've keep the Chevy!!!!! lol... just kidding man... I wasn't a fan of the RAM at the beginning, but I like what you are doing with it. I truly enjoy your videos. Keep doing your thing. Stay safe out there.
@@MarkBrenner so you lost 3 MPG's from the lift? Damn I bet you're spending quite a chuck of change on fuel for that Ram! I want one but the MPG's have me thinking otherwise. What gear ratio? 3.92 or 3.21
9:51 YALL ARE WELCOME. man this was a babble video
Thnks
You guys are here for 11:35
You're the hero here, to much rambling, , ,
beano52 thank you brotha 👌🏻👌🏻👌🏻
How could I repay you
Terran Talsma lol
Skip to 10:32 for price and saves you time
Ready lift sells the 3.5" lift for $599 if you are a Military Veteran or Active Duty. Pretty nice discount
real content starts from 10:30 . Thank me later
what a "well don,informative and entertaining" vid we need something like this in this bad time in our lives😎👍👍!
I put a 2” leveling Bilstein shocks on my truck with 1” rear spacers. Got about little over a inch of rake and then installed AirLift 5000 bags. Looks good.
How are the bags treating you?
@@MarkBrenner its good no issues. I did the install myself but beware if you do the Airlift bags you have to cut off your bump stops. So no going back. I got the bags with a inner jounce in them so they act like bump stops.
Jon I envy you. I might have to do that one day 🤔
Man, you should of went with a BDS/Zone lift. God for bid something happens with the truck and needs warranty, an the dealer trys to not cover it, BDS/Zone will send a team of layers to fight them on their dime not yours, because they put so much R/D into making their kits meet the same standards or better. Truck looks killer!!!!
I understand completely, I cant see any car that’s lower than the side mirrors in my truck. The civics and Prius are invisible to me.
😆😆😆
wew!..."get to the point" is not this video if u guys wana save your time
Great content mark ! Everything on point and you are right about braking as I had issues with stability on my 4th gen ram post lift. Switched to rebel 12 now and 3.5 sst is on its way, love the wheel choice man - stay safe !
Sick!! Stay safe as well 👊
I started to read “How much I paid...” and I thought I was about to get my cost of ownership video! 😃🍿
Hahah stay tuned Spence!
Mark Brenner All good, keep enjoying the new ride buddy!
Not into lifts that much but your height would be the maximum height for me. The truck looks super nice though and can't wait to see which wrap you pick.
🤙
How is the ride quality after a few a while with this ReadyLift setup? I'm looking to get the same kit but been reading mixed reviews on rough rides vs. not a major change compared to stock.
Great Vid! Would love to see a "out the door price break down" vid. Cheers Mark
Coming soon!
Looks good bro, where’d you get it installed?
Oh man here comes with dodge electrical issues! Great Video! What drone is that? Also, large lift kits on IFS trucks is pretty stupid. Did a 6" on my old 2008 Silverado 3500 dually. Had to cut mounts and weld in sections. Total pain in the ass. Now if you're in a HD truck with Solid axle front and rear, lifts are very easily reversed if desired.
Thanks! It’s a dji Spark
Get rid of the sport decals on the truck it looks horribly placed since you have the boxes.
I’d have to agree
Is it 4x4?
truck looks good man
Dude where in California are you shooting these places at? I would like to take my Ram and just drive there without anyone bothering me
😂 yeah I know right. Hard to come by in so-cal
Hey thanks for the ebay info, was getting ready to purchase from a online dealer my ready lift kit, but will extend my research to sites like ebay
Your total paid just for a lift kit and installation labor? How about set of 4tires? I love your truck ! Look so amazing dear
Jessica Nhan thanks 🙏 I bought the tires from a friend for $400
Mark Brenner love your video . Your video so helpful.. 1st I like how u control ur drone. Second Ur lift kit so cool
What drone is that?
Dji spark
That’s a cute little truck.
Free mod upgrade. Loose the crome Ram emblem on the doors. Ugh!
Soon😂
I just ordered a 2020 Ram 1500 Bighorn (Black with Night Edition). I plan on putting a 3.5” lift kit and 33” tires (Nitto or Toyo). If you could do it all again, would you stick with the Readylift SST? If u can have any lift brand/kit, if money is no issue, what would you pick? After I get the lift and tires, anything you think needs to be updated/replaced for the best system?
I've thought about the mopar 2 inch for warranty reasons. the readylift has a 100K powertrain warranty included with their lift.......dont go anywhere else
How much would a lift be for just 3 intches
Is there a particular reason you went with the 34s over the 35s? I have the same exact lift and went with the 295s as well. Lol regretting not getting the 35s🙄
Not going to lie I wish I went 35s. Definitely going 35 on the next set
Try 305 70 18 next.
Great video fam. I was just by the great park how do I get to this trail ?
Would you recommend a cold air intake on the Ram or a Silverado?
Both?
@@jakewelding4172 witch one would you recommend
@@kevingatlin4714 what cold air intake or what vehicle to put one on?
@@jakewelding4172 19 Silverado
Bad ass truck
🙏
Que pasa mark. I love the videos. Nice drone shots
Que pasa!!
What measurements u have from center of wheels to edge of fender
Ram 1500 love it
🙏
What's the brand name of the the lift?
quik question.. whats the offset on your rims? whats the brand and model? thx
Pro comp 46 with a 5 backspace
Ram looks amazing make me want to buy one
Proper way on using gloves. 👍🏽
Gotta do my part
Why the ReadyLift 3.5” kit over the Rough Country 3.5” kit ?
check out a video online comparing rough country hardware to ready lift hardware. Its crazy how cheaply made, not beefy the rough country stuff is to the ready lift parts
What kinda drone do u have? Records bad ass
Dji Spark
U ever going to get a exhaust for it ?
This man needs corsa in his lifeee
No doubt 😁
Great video, I love the lift, it looks great, keep up the good work
Appreciate it 🙏
Your size tires look right for the size lift.
Proportional for sure
Massive black cloud is your cue to have fun, not to go home 😈
Nicholas Brown hahah 😆
What size tires you running w the 3.5 lift
Nico 35x12.5
Already having issues with a BRAND new truck??? You should've keep the Chevy!!!!! lol... just kidding man... I wasn't a fan of the RAM at the beginning, but I like what you are doing with it. I truly enjoy your videos. Keep doing your thing. Stay safe out there.
Hahah yeaaaa. Worst part is I’m not trying to go to the dealership with everything going on so I’ll have to live with it for a bit
Shouldve kept the Chevy
Nope. He made the right choice. RAM MOPAR all the way. Lol.
What's your current MPG?
12
@@MarkBrenner so you lost 3 MPG's from the lift? Damn I bet you're spending quite a chuck of change on fuel for that Ram! I want one but the MPG's have me thinking otherwise. What gear ratio? 3.92 or 3.21
@@jasonjordan8578 can you even do that with 3.21 gears?
Pickups should NEVER be lifted. Hilarious.