Thank you people like you are what keep amazing communinties going, i bought one through you and after downloading this i just ordered 2 more keep it up.
Hello sir. Fantastic! I was looking for this how to install for a while. Can you make more videos about this T embed ? Show how to use the features and how to edit the code program ? Thanks you
@ I looked on the GitHub for Bruce on the CC1101 and it’s still in the works. Here’s a link if you’d like to check it out. github.com/pr3y/Bruce If you scroll down past the “config” area you’ll see a chart with current issues and what’s working for a plethora of devices.
I also bought it and used bruce, but there were many problems. Some functions could not be exited and I needed to turn off the device and restart it. I hope there is a matching program.😆
i did install it with a different type of sd card that pirata recommends,(sdhc up to 32gb) and it installed and worked fine, i got the proper sd hc card and re flashed it, but the unit was working with out the sd card, so i'm guessing the card is solely for storage??
Bro, can you make a quick video showing how to remove the battery? I managed to unplug the battery to do the installation without removing it, but if I need to remove it in the future I have no idea how to do it without damaging it
@@heavensplitter there’s a bit of double sided tape on the battery. Some light pulling/prying will loosen the tape up. And then it’ll come up at a slight angle. Try that. If your battery wiggles around after removing the tape you can always add another layer of double sided tape. I like the red Scotch brand stuff for things I want to stick but may want to move. And the Gorilla tape for stuff I want to stick and it never move.
@@Slimeyyvr no. The CC1101 T embed is all you need. Bruce however is still being developed for it. So as of the latest firmware. 1.7.2 only a few things are working. Checkout Bruce’s GitHub page for what currently is working for the CC1101 T Embed.
@ it’s under the main title from LilyGo’s T-Embed page. “T-Embed CC1101 PN532 NFC/RFID I2C transceiver module” However Bruce currently does not have it configured.
Thank you people like you are what keep amazing communinties going, i bought one through you and after downloading this i just ordered 2 more keep it up.
@@3vil8unny THANK YOU SO MUCH. this means allot to me. Your awesome. Thanks again! I’ll keep creating. Allot more to come.
I’m waiting on mine and I’m going to follow all your instructions I’m a newbie to t-embed but I came from the flipper club
Awesome video man waiting on my t embed now
Thanks for sharing, my LilyGo is on its way and this is something i will have to try out
Thank you excited for this
Hello sir. Fantastic! I was looking for this how to install for a while. Can you make more videos about this T embed ? Show how to use the features and how to edit the code program ? Thanks you
@@vinkin2542 most def. Coding will be new for me. But I’ll give it a a go. And I do plan to go over allot of the features. Thanks again
Do you have a guide on how to install stock firmware?
Thank you for the video!
One question:
Is unplugging the battery before flashing necessary for all firmwares?
@@luminosity_altvr I’m not sure for future firmware’s. When I find out I’ll do another update.
Sweet keep the videos coming hey was curious do you think the LEDs are going to get working again?
@@jasonmustang9039 I’m wondering the same thing. I’ll ask the developers and see what the plan is.
Hey was just curious did you ever get a chance to ask about the LEDs working again thanks
@ I looked on the GitHub for Bruce on the CC1101 and it’s still in the works. Here’s a link if you’d like to check it out.
github.com/pr3y/Bruce
If you scroll down past the “config” area you’ll see a chart with current issues and what’s working for a plethora of devices.
I also bought it and used bruce, but there were many problems. Some functions could not be exited and I needed to turn off the device and restart it. I hope there is a matching program.😆
@@小坤杨-o4u ya. I think it’s still very beta and in the coming weeks Bruce should be fully functioning.
how is this compared to the capibara zero?
@ I’m not sure. I personally don’t have any experience with the capibara
@@Jeremiah.o.A.T Id love it if you checked out Capibara zero! please :)
i did install it with a different type of sd card that pirata recommends,(sdhc up to 32gb) and it installed and worked fine, i got the proper sd hc card and re flashed it, but the unit was working with out the sd card, so i'm guessing the card is solely for storage??
@@flavsouza-g2z yes for bow. Until Bruce expands beyond the units internal memory. Or you want to capture files.
@@Jeremiah.o.A.T cool. hey hav e you seen that he dropped a pcb on pcbway? pretty awesome
Bro, can you make a quick video showing how to remove the battery? I managed to unplug the battery to do the installation without removing it, but if I need to remove it in the future I have no idea how to do it without damaging it
@@heavensplitter there’s a bit of double sided tape on the battery. Some light pulling/prying will loosen the tape up. And then it’ll come up at a slight angle. Try that. If your battery wiggles around after removing the tape you can always add another layer of double sided tape. I like the red Scotch brand stuff for things I want to stick but may want to move. And the Gorilla tape for stuff I want to stick and it never move.
Do you have to remove it? Can I just unplug @@Jeremiah.o.A.T
hi just trying this today getting error message failed to download mainfest ? any ideas why
@@gambit3570 try beta instead.
@@Jeremiah.o.A.T yes tried that same issue
Hi! Urgent question, do you need extra hardware to make it work? Like fir all the features, if yes can you provide links of them please and thank you.
@@Slimeyyvr no. The CC1101 T embed is all you need. Bruce however is still being developed for it. So as of the latest firmware. 1.7.2 only a few things are working. Checkout Bruce’s GitHub page for what currently is working for the CC1101 T Embed.
@KJ7VUB okay but I mean is there features on Bruce that you need to get an extra module for?
@ no. At least not yet. There’s no external models built yet for it from
What I’ve seen.
@@Jeremiah.o.A.T really? RFID is built in? Didn't see that in the spec sheet
@ it’s under the main title from LilyGo’s T-Embed page. “T-Embed CC1101
PN532 NFC/RFID I2C transceiver module”
However Bruce currently does not have it configured.
It tried that procedure but it seems like my computer isn't recognizing my t-embed cc1101. It says no compatible devices found.
@@XiasCryptoChannel2024 you may need to hold “boot” while plugging it in and through the entire process?
where do i buy this device ? a ready to use one with battery etc included ?
@@pipi666666666 links are in the description.
Instala o m5 Lauche nele e coloca os Firmware no cartão para iniciar por lá 🤙👍
My device is not seen by my computer
@@lmg_skoOff unplug from computer. Hold down boot button. (Center button on click wheel) plug in. Keep holding down boot. Then try flashing.
That is what I did but it’s not working 😢
@ did you unplug the battery?
@@Jeremiah.o.A.Tyes
@@Jeremiah.o.A.Twhen I go to my laptop settings I see my device but chrome don’t
Hello👋 does it have the brucegotchi on the device?
@@Jiahao.09 I haven’t checked the latest firmware from Bruce so not entirely sure.
@ ohh i see can you please help me see? Thank you