I’ll give you credit! You have nerves of steel to do eyebrows with a trimmer. Wow impressive. I trim the long hairs down with the cuticle scissors. And then go in with the straight razor.
@@Christopher_Minnieweather everything is great. Question, I need a few tips on cutting the back of my own hair with a hand mirror. Trying give myself a taper at back. I can do everything else but working with back and even the lining on the side.of head is a challenge. Any tips would be appreciated.
For me, if a client has straight hair then I will set the guideline with the trimmer. Then I’ll go in the the blade fully open, no guard, up against the shape of the head. I only use the 1-1/2 to half for detailing at the end if I need it. Then I blend out by closing the blade at the bottom. Hot later and razor the bald line, then fade in the trimmer line with a shaver. Fastest fade I ever did was 3 minutes from a 3 on the corners down to a half by freehanding with the shape of the head. I was even shocked it was so fast
That sounds like a fire system to try out. Why do you use the razor with lather as well as the electric shaver? I never baked out with the razor because it’s not as close since most people only cut with the grain when balding out versus using th electric shaver and cutting against to get it closer. Just always seemed like a waste of time and product doing it that way? Thoughts?
@@Christopher_Minnieweather Thanks Chris, and thanks for the reply! I ask the client if they want a razor line or a trimmer line, or the shaver. Without a doubt they all ask for the hot lather razor finish. Some clients come in just for that because it’s so satisfying and pleasant. Imo that experience is worth any imperfections from the razor if they can’t be fixed with the shaver
@@AlexeiMikhailBoleslav no problem fam. I think it’s to many options😂 the client chose from the options you gave. If they asked for a skin fade then use the shaver they’ll appreciate how much longer it last especially if they are used to only getting the razor on the sides. But it’s all personal preference on how you want to run your business. I just try to eliminate wasted steps. But the razor is nostalgic so I understand why they say they want it. Not in my chair tho 😂
I dont get how you were able to skip the half guard. It looked like you were laying the clipper pretty much flat on the head and it was blending into the 1 closed
You can do it using corners and flicking out. The 1919 clippers I was using has a slightly longer reach because I have the wahl legends bracket on it. Hope that helps Mike thanks for watching brother
@@Christopher_Minnieweather Yeah cause ive tried different ways to skip the half but maybe im just not going up high enough with the lever open to fully blend it into a 1 closed
@Jose Facial13 Rivera yessir thanks Jose glad I could bring you something different. Let me know how it goes when you try it fam! Blessings to you as well💪🏾💪🏾 thanks for watching
What up Jessie I should have been a little more detailed in my voiceover. The 1919 I use have a wahl legends bracket on them so they open up a little bit further then the other seniors I was using. Hope that clears it up for you
@@Christopher_Minnieweather it’s always nice when you drop bro. Its always worth it. Your editing is super aesthetic. Trying people’s styles out is a dope concept. Gotta try new stuff to keep it spicy 🌶
Great video If you dont mind me asking how long have you been cuttin? Also how much did you charge in the beginning and how long did it take for you to raise your price
What up Joshua thanks for watching. One of the first shops I was at we charged 13 for a cut and 10 on Tuesday’s. I stayed at that shop for 6 years and went up in price as the shop went up until maybe about year 4 I went up by myself with the permission of the shop owner to 25 and 30 with beard. The next couple years I went up $5 a year then I made the jump last year to 60 a cut 70 with beard. That was a $20 increase at one time. I was nervous but I felt like I was worth it. God has been good because with a that increase I’m still full every week.
I haven’t used Wahl since 2012! Once you start using stylecraft, Andis I’m fabulous there’s no need to ever use Wahl trimmers or clippers ever again. Unless they put out more innovative products. But the product semi changed since the 80s. The most you get out of any of their clippers is two hours run time. That was OK in 2015. And the clippers are heavy. The magic clippers light. As far as that goes are used to JRL or the new Fast Feeds
I started out using walls but stopped using them around 2012. I’ll never pick up any wall clipper or trimmer for that matter again. This is no reason to. They’re heavy I’ve been the same since the 80s. I haven’t changed at all. The only wall product that I use as I take the wall five star detailer trimmer blade and I put it on the 3-D trimmer. It’s like a $23 trimmer if you can get on Amazon. But I never use it.
Really? Have you tried the Magic clip cordless clipper from wahl. They are super light weight. Which stylecraft clipper do you recommend. I’ve been trying out the original ergo and I love them.
The Rhino comb by Morono has been out for probably 6 years now. I had one back in the day. A good tool, not sure if he’s changed it much since then. May have to order one for you.
Hi quick question if they have a widows peak n they Wana leave that hair long on front how do u fade or make it look even with the back. ? How to leave that area in the windows peake hidden?
Enjoyed!? FKN LOVED IT! 👏👏👍
Ayyyeee that’s what I’m talking about! I appreciate your feedback 🙌🏾💪🏾
FINNALY DROPPED SOME CONTENT🔥
Been a minute man it’s good to be back. What you think about it?
THANK GOD DEADSTOCK BACK IN BUSINESS
Amen brother good to be back!
Yooo… this is so detailed. I need to watch all of this!
He’s back !🔥🔥
What up Zae! I lots good to be home!
Good job Chris! Welcome back
Thanks momma❤️
This was full of gems!
Thank you fam! Glad you enjoyed the content. More to come.
My guy! Always been fire with the clippers!
Thank you brother i appreciate you
Yes sir!! Glad to see you back in action. Love to support even from a distance!
Yessir. Thank you brother. How’s the fam! I appreciate your support
Hey Bro, I'm glad you are back on RUclips and I really like that hairstyle on your customer. God bless you and your family. 🙏🏾😔
Thanks Q it’s good to be back I appreciate you fam thanks for watching. God bless you and your as well🙌🏾❤️
Hey that technique ,si the Best Man , keep on the good work
Thank you so much, I appreciate you watching! Blessings!
Welcome back bro🔥🔥🔥🔥🔥cut
Big Jay what’s good brotha!
Man, super happy to see you post. Also that Christian music/beat in the back is a vibe.
Yessir. I told you i was coming back. I should go live tonight just to kick it with everyone. Maybe tomorrow I forgot I have my mens group tonight lol
@@Christopher_Minnieweather Yeah fs you should definitely go live again!
I'm glad you're back on the grind! Been missing the content! Once again the cut was 🔥🔥🔥! Can't wait for the next one.
Thank you Corey I’m grateful 🙌🏾 catch you then!
Love the vid!!!!!!! Thanks for coming out of retirement😘
I ain’t say I was retired 😂😂😂
Glad to have you back! Im trying to make this my system currently and eliminate guards, taking some time to get used too
Thanks fam. Let me know how it goes. Always takes time and practice when trying a new system but it's worth it in the end
I love your barbering technique and tutorials I'm a barber too ❤😊
Killed it!!!
Thanks John
Good to see you back bro!
Thanks sis I appreciate it. Also did did your boyfriend ever find a good barber? Glad to be back was missing my peeps!
@@Christopher_Minnieweather Yes! We found a great barber in my old hometown (luckily my bf still works in that town). Thanks for all of your help.
@@earthyboheme2719 awesome so glad to hear that! No problem at all!
Welcome back!
Thank you fam!
Fire Cut BRO!
Thanks Rich!🙏🏽
Fire video, keep up the good work
Thank you brother I appreciate it!
I’ll give you credit! You have nerves of steel to do eyebrows with a trimmer. Wow impressive. I trim the long hairs down with the cuticle scissors. And then go in with the straight razor.
I’ve always done it this way so it’s second nature 😂 I didn’t think about others not doing it like this. I appreciate the feedback brother!
What up bro, hope you having a bless day, today.
What’s good family I most definitely am. How are you?
@@Christopher_Minnieweather everything is great. Question, I need a few tips on cutting the back of my own hair with a hand mirror. Trying give myself a taper at back. I can do everything else but working with back and even the lining on the side.of head is a challenge. Any tips would be appreciated.
Fire 🔥 cut!!
Thanks fam
Good to have you back, Chris 🔥💯
Good to be back Joeski hope all is well fam!
For me, if a client has straight hair then I will set the guideline with the trimmer. Then I’ll go in the the blade fully open, no guard, up against the shape of the head. I only use the 1-1/2 to half for detailing at the end if I need it. Then I blend out by closing the blade at the bottom. Hot later and razor the bald line, then fade in the trimmer line with a shaver. Fastest fade I ever did was 3 minutes from a 3 on the corners down to a half by freehanding with the shape of the head. I was even shocked it was so fast
That sounds like a fire system to try out. Why do you use the razor with lather as well as the electric shaver? I never baked out with the razor because it’s not as close since most people only cut with the grain when balding out versus using th electric shaver and cutting against to get it closer. Just always seemed like a waste of time and product doing it that way? Thoughts?
@@Christopher_Minnieweather Thanks Chris, and thanks for the reply! I ask the client if they want a razor line or a trimmer line, or the shaver. Without a doubt they all ask for the hot lather razor finish. Some clients come in just for that because it’s so satisfying and pleasant. Imo that experience is worth any imperfections from the razor if they can’t be fixed with the shaver
@@AlexeiMikhailBoleslav no problem fam. I think it’s to many options😂 the client chose from the options you gave. If they asked for a skin fade then use the shaver they’ll appreciate how much longer it last especially if they are used to only getting the razor on the sides. But it’s all personal preference on how you want to run your business. I just try to eliminate wasted steps. But the razor is nostalgic so I understand why they say they want it. Not in my chair tho 😂
Great cut 🔥
Thanks brother🙌🏾🙌🏾
Yea I gotta be honest this is a fire cut .. might have to try this system
Thank you my guy! I really appreciate you brother. It’s good to be back dropping. What’s your next vid?
Love the layering 👍🏾
Thanks glad to be back
My boy is back!! Looking forward to the new content
What up Alex same here! Thanks fam
Glad to see you back bro!! Fire cut as always. 🔥💪🏾💪🏾
Thank you fam I appreciate the love
Dope sir
What up Mike!
Gave bro the Tommy Boy…LACED EM!
Thanks fam 😂
@@Christopher_Minnieweather Yomp!! Keep up the good work fam
🔥🔥🔥🔥I appreciate you for doing this tutorial bro. It was much needed
No problem fam thank you for watching
GREAT EVERTHING!
Thank you Jeff!
I dont get how you were able to skip the half guard. It looked like you were laying the clipper pretty much flat on the head and it was blending into the 1 closed
You can do it using corners and flicking out. The 1919 clippers I was using has a slightly longer reach because I have the wahl legends bracket on it. Hope that helps Mike thanks for watching brother
@@Christopher_Minnieweather Yeah cause ive tried different ways to skip the half but maybe im just not going up high enough with the lever open to fully blend it into a 1 closed
@Jose Facial13 Rivera yessir thanks Jose glad I could bring you something different. Let me know how it goes when you try it fam! Blessings to you as well💪🏾💪🏾 thanks for watching
@@Mike-hy8cs make sure to watch the moving blade to see exactly where you’re at and ensure your going high enough. Hopefully that helps fam
He has a bracket on those 1919s. Wahls are usually short. You can do this technique with the Masters fully open since it has a longer blade.
Definitely going to try this system on my next client... the cut came out so crispy 🔥🔥🔥💈
Yessir let me know how it goes when you do. Thanks for watching fam!
Thank you bro
🔥🔥🔥
Thanks brotha
What’s the purpose of switching between the seniors and the 1919. Are the blades different? Are you detailing with a fade blade or taper blade?
What up Jessie I should have been a little more detailed in my voiceover. The 1919 I use have a wahl legends bracket on them so they open up a little bit further then the other seniors I was using. Hope that clears it up for you
fire cut bro. Jesus is a cold barber for sure.you killed this style
Thank you my guy I really appreciate you watching and the feedback. I love his work bro definitely one of the best to do it.
@@Christopher_Minnieweather it’s always nice when you drop bro. Its always worth it. Your editing is super aesthetic. Trying people’s styles out is a dope concept. Gotta try new stuff to keep it spicy 🌶
Quick question Why did you remove the line created with #1 closed using the No guard Level Open All the way instead of Using the Half guard
Using the corner and different angles with the clippers you can skip guards.
That’s fire but is that the .5 guard
Great video If you dont mind me asking how long have you been cuttin? Also how much did you charge in the beginning and how long did it take for you to raise your price
What up Joshua thanks for watching. One of the first shops I was at we charged 13 for a cut and 10 on Tuesday’s. I stayed at that shop for 6 years and went up in price as the shop went up until maybe about year 4 I went up by myself with the permission of the shop owner to 25 and 30 with beard. The next couple years I went up $5 a year then I made the jump last year to 60 a cut 70 with beard. That was a $20 increase at one time. I was nervous but I felt like I was worth it. God has been good because with a that increase I’m still full every week.
I haven’t used Wahl since 2012! Once you start using stylecraft, Andis I’m fabulous there’s no need to ever use Wahl trimmers or clippers ever again. Unless they put out more innovative products. But the product semi changed since the 80s. The most you get out of any of their clippers is two hours run time. That was OK in 2015. And the clippers are heavy. The magic clippers light. As far as that goes are used to JRL or the new Fast Feeds
Oh didn’t see this comment lol about the magic clips. You like the new fast feeds?
This guy came out of hiding. FIANALLY!
I know right. I missed y’all!
I started out using walls but stopped using them around 2012. I’ll never pick up any wall clipper or trimmer for that matter again. This is no reason to. They’re heavy I’ve been the same since the 80s. I haven’t changed at all. The only wall product that I use as I take the wall five star detailer trimmer blade and I put it on the 3-D trimmer. It’s like a $23 trimmer if you can get on Amazon. But I never use it.
Really? Have you tried the Magic clip cordless clipper from wahl. They are super light weight. Which stylecraft clipper do you recommend. I’ve been trying out the original ergo and I love them.
Man I want to see you try this special comb out. Made by Morono. It has a measuring slide on it and wire thing on it to give you a precise edge up.
The Rhino comb by Morono has been out for probably 6 years now. I had one back in the day. A good tool, not sure if he’s changed it much since then. May have to order one for you.
Hi quick question if they have a widows peak n they Wana leave that hair long on front how do u fade or make it look even with the back. ? How to leave that area in the windows peake hidden?
Nevermind .I so needed to c the video all the way to the end. Sorry😁 so that method is the best way to cover the widows peak?
@@barbi3499 yes pretty much or to cut it off but that’s pretty much your options.
@@Christopher_Minnieweather thnk uuu❤️
@@barbi3499 no problem
What audio is this