Corolla 2010 LE rear speaker replacement (don't remove seats)
HTML-код
- Опубликовано: 11 сен 2024
- Corolla 2010 LE rear speaker replacement
The old ones are dead and the bass did not work.
This video is just to show you that you do not remove seats like in some of the videos and minimal panel removal. I sit on the seats making it much easier to install the speaker and no strain back muscles.
This is not a full tutorial mostly just the removal part of the panels. This is only the 2nd video I made so not that good. The wire adapter that in the reviews said it works are not the correct adapters.
100 bucks in material
20 for adapter
80 for speaker
----------------------------------------------------ITEMS--------------------------------------------------
JBL GX962 600W 6" X 9" 2-Way GX Series Coaxial Car Loudspeakers
hwww.amazon.com...
Toyota 2002-2011 Camry & 2003-2013 Corolla 6x9 Rear Deck Speaker Adapter Spacer Rings - SAK008_69-1 Pair
www.amazon.com...
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The information contained in this video is for general guidance, not responsible for any errors or injuries that you have done.
DISCLAIMER - Due to factors beyond the control of alansunshine, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. alansunshine assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. alansunshine recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of alansunshine, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the end user and not alansunshine nor any of it’s subsidiaries.
Installed Kicker 6x9 in the rear deck in my 2017 Toyota Corolla SE. Other videos say to remove seat. Very helpfull video. Thx.
Your welcome. Saw those videos too myself.
Thank you! I installed in a corolla 2010. A lot of sweat but the new speakers sound great😊
Thank you so much. Blew out my speaker earlier this week and just ordered the ones in the description. Thanks again for putting the links.
np. glad it helped
Sar Mujhe rear speaker Ki avashyakta Hai
Thank you, I think the adapter is much better than installing the speaker metal to metal, the adapter kind of I think reduces vibration to move into the car frame.
the easiest way is to harvest the old connector and just splice its wires to the wires on your new speaker. that way you dont have to fuss with solder or brittle plastic connectors
That’s exactly what I just did ✊🏻✊🏻
And use electric tape. I see some tape on my factory install.
Yeah I just bought the speakers and adapter kit in the description. I will not be soldering anything. I do have a soldering iron just in case.
Do not remove your weather stripping. It’s not needed. Use a trim tool to pop those panels.
thanks for the tip. hopefully these speakers last and don't have to do it another time.
Thank you for the video, it was extremely helpful. Just replaced the rear deck speakers in my 2010 Camry LE
Good to see noobs learning. Keep it up.
Thank you for the video I see what I'm up against now.
Does anyone know if they sell the actual adapter that goes to the speakers? I've been looking all over online and can't find the correct one. I did strip the wires and just attached them to the speaker that way but I would rather have the actual harness so the connection to the speaker is better.
Same. If anyone knows. drop a comment and let us know.
Thanks 💯😎💥
Hey man can u make more videos about your Toyota Corolla ? Plz like more modifications
Too bad this corolla is not mine. Just replacing their speakers bc the stock one broke and their were annoyed by it
How are these speakers holding up? I'm debating on getting these or the newer GX963 pair for this very vehicle.
still working quite well
Gracias good job
Bro will new speaker you put are working on same stock stereo or you have replaced it idk the wattage of stock stereo can you help me out brother
I only replace the speaker and used stock radio. Link of the speaker I used is in the description.
Has to be any easyer way can’t we just in new from the trunk and leave old one in or drill old bolts out and pull them out from the trunk I got some tin snips
I was so disappointed when I found out this wasn't the case. Why? Just why?
Did it sound better?
I am not the person to ask. I can't detect the difference in lots of speakers lol
Bom Dia , qual a potencia em rms do alto falante original da Toyota?
Gracias está muy bien el tutorial
Glad you were able to follow the video
Did it come with the adapter kit? If not, can you send me the link?
Are you talking about the wiring? I just took the old wiring off and putting on the new speaker. I think I unsolder the old one.
www.crutchfield.com/g_103100/Speaker-Wiring-Harnesses.html?tp=1025 one of these might work. Not 100% sure. Someone recommended this site.
me puedes regalar tus parlantes originales, que los mios se han roto, y no consigo en ningun lado en mi país :D
nice minion
No, way I can do this on my own😢
Was thinking to do it. But this is ridiculous. My 200o Corolla that was so much easier. Progress I guess. One of my speakers is busted. Not worth fixing on a 14 year old Corrolla. Just cut it out. Thx for the video though.
Sar Mujhe rear speaker Ki avashyakta Hai
Very easy...
Lol