My STEREO WIRELESS Transmitter for Backing Tracks
HTML-код
- Опубликовано: 3 июл 2024
- In this video, I'm showing you how I have been using a stereo wireless transmitter to run my backing tracks live. Yes, this is silly and overkill, but I love not having cables attached to me, and this is how I've been doing it. The receiver will split the signal to left and right with a breakout cable, so it's been working very well for my backing tracks.
👉👉👉 PURCHASE THE NUX STEREO TRANSMITTER 👈👈👈
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
amzn.to/3yVff4m
👇👇👇 SOCIALS & WEBSITE👇👇👇
✨ / scottuhlmusic
🌐 www.scottuhlmusic.com
🎸🎸🎸 MY ORIGINAL MUSIC/PROJECT "SPIRAL CELL" 🎸🎸🎸
🎵 / spiralcell
🔥🔥🔥 DEALS & DISCOUNTS 🔥🔥🔥
💥 5% OFF Phenyx Pro products (use promo SCOTTUHLMUSIC):
👉 phenyxpro.com/?ref=zo7epbiric 👈
🤗🤗🤗 SUPPORT THE CHANNEL: 🤗🤗🤗
☕ Buy Me A Coffee: www.buymeacoffee.com/scottuhl...
💸 Send a Tip: www.scottuhlmusic.com/tips
0:00 - Intro
1:12 - NUX Stereo Transmitter
3:46 - Lekato Stereo Transmitter
4:43 - Purchase Links
5:15 - Outro
⚙️ GEAR MENTIONED IN THIS VIDEO ⚙️
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
◆ NUX 5.6GHZ STEREO WIRELESS SYSTEM ◆
amzn.to/3yVff4m
◆ LEKATO - 3.5mm WIRELESS SYSTEM ◆
amzn.to/2ZW7VHI
◆ 3.5mm TRS to (2) TS Hosa Cable (10ft) ◆
amzn.to/3tCklQA
◆ 3.5mm TRS to (2) TS Cable (Multiple Length Options) ◆
amzn.to/43bHU2B
◆ 3.5mm Female Coupler (5 pack) ◆
amzn.to/3WDfgVs
💥 OTHER GEAR TO CHECK OUT 💥
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
◆ NUX - B3 ◆
Wireless XLR System
amzn.to/3kCJynZ
◆ NUX - B-5RC ◆
Wireless Guitar System FOR ACTIVE PICKUPS
amzn.to/3a6Ks8s
◆ NUX - C-5RC (5.8ghz) ◆
Wireless System FOR ACTIVE PICKUPS
amzn.to/3K7ZDyC
◆ NUX - MIGHTY PLUG PRO ◆
amzn.to/3r8TF8h
◆ LEKATO WS70 WIRELESS SYSTEM ◆
amzn.to/3s4wLgW
◆ LEKATO 5.8GHZ WIRELESS GUITAR ◆
amzn.to/2W9HFE9"
◆ LEKATO - WS-100 WIRELESS w/CHARGING CASE ◆
amzn.to/3NgC1vW
◆ LEKATO - WIRELESS 5.8ghz XLR SYSTEM (for Microphones) ◆
amzn.to/3d4gpQo
🎥 OTHER VIDEOS TO WATCH 🎥
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
◆ NUX B7PSM Wireless Stereo IEM System: • AFFORDABLE Wireless IN...
◆ Lekato 3.5mm Stereo Wireless: • 3.5mm WIRELESS System ...
◆ How to Use An Ipad for Backing Tracks: • How to Use an iPad/Tab...
◆ Stage Traxx 3 Part 1: • Stage Traxx 3 - This A...
◆ Stage Traxx 3 Part 2: • LOOP/RESTRUCTURE Multi...
◆ Stage Traxx 3 Part 3: • How to SEND & RECEIVE ...
◆ 10 Tips/Tricks If You Use Backing Tracks: • 10 TIPS/TRICKS If You ...
◆ Why I Am Pro Backing Tracks Live: • Why I'm PRO BACKING TR...
◆ What You Need to Know About 2.4Ghz: • What You NEED To Know ...
◆ Tracks/MIDI/Video WITHOUT a Laptop: • Tracks/MIDI/Video/Etc ...
◆ In Ear Monitors Video Playlist: • In-Ear Monitors
◆ Cool Cheap Music Gear Playlist: • Cool/Cheap Music Gear
◆ Beginners Guide to In Ear Monitors: • Beginners Guide to In ...
◆ How to Run Your Own IEM Mix: • How to Run Your Own In...
◆ What to Look for in a Wireless System: • What To Look For In A ...
◆ The Ultimate Compact/Travel Guitar Rig: • The Ultimate Compact/T...
◆ NUX Mighty Plug Pro: • The ULTIMATE Practice/...
◆ NUX Wireless Guitar System for Active Pickups: • Nux B-5RC Wireless Gui...
◆ Beginners Guide to IEMs: • Beginners Guide to In ...
◆ $20-$50 IEM Earbuds That Work Great: • Cheap In Ear Monitor E...
◆ Running Your Own IEMs: • How to Run Your Own In...
◆ Best Cheap IEM System: • Affordable Wireless In...
◆ Cheapest IEM System on Amazon: • CHEAPEST Wireless In-E...
◆ Get 2 Separate Mixes from one IEM Transmitter: • How to send TWO Separa...
◆ 10 Cheap Items for an IEM Rack: • 10 CHEAP Items For You...
◆ Mix Digital Mixers From Your Phone: • Mix/Control DIGITAL MI...
📷 VIDEO SETUP: 📷
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
◆ CAMERA: amzn.to/3vg4R54
◆ LENS: amzn.to/3KFN4NP
◆ MAIN LIGHTS: amzn.to/3Gj2Fjz
◆ BACK RGB LIGHTS: amzn.to/3I2Yc5S
◆ TRIPOD: amzn.to/3dv2RvB
◆ DESK MOUNT: amzn.to/3WJvCuB
◆ MONITOR: amzn.to/3viKeWg
*Links are affiliate links. It doesn't cost you anything extra to use those links, and is a free way to support the channel 😊 
Видеоклипы
Scott is one super talented musician /tech nerd. Great info here as usual.
Musician and nerdy-gear-guy 😊
Broseph! I LOVE THIS! You are a man of the future going as wireless as possible! Who wants to wrap and unwrap cables to set up and take down? Lunatics! That’s who!!! 🤘🏼😎🤘🏼
Dude I know! This is unnecessary, but that’s how obsessed I am with this hahahaha
I've been looking for this exact solution. Thank you for posting the review!
Glad to help!
Awesome as usual.
Thanks Darryl! 🤘
Thankyou for you great and very informativ videos. Bought 2 products just now after watching.. 😀
Awesome! Thanks, and enjoy 🤘🤘
I recently came across your page and I’m so glad I did. I’ve been fixating on creating my own backing tracks and running them. Watching your videos have helped me create those and made it seem sooooo easy!! Thanks for all the work you do and for sharing it!
Thank you! Glad the channel has been helpful to you 🤘
@@ScottUhlMusic your channel has been so amazing! Keep doing your thing man!!
I use 2 slxd packs going into a splitter cable into the iPad. Works perfectly
Thank you for your hard work explaining this wireless system! I love the wireless systems too. I have guitar connected to pedal board and pedal board connected to my amp. I am happy to learn that you use pre-recprded tracks with live shows. I have been thining about doing that with my Duo ( my wife and I call ourselves Wild’n’Mild ) thanks again. Keep Rocking, Scott!
Nice! Thanks for watching the channel 🤘
Interesting solution for sure. I got a cheap Bluetooth adapter off Amazon and just Bluetooth from the iPad to it into my mixer. Has actually been rock solid.
That’s good! My Bluetooth solution I tried about 5 years ago was a disaster. I need to see if you can get stereo out from Bluetooth into a mixer so click and tracks are separated
Great I hate stage clutter too! Great video
Same here!!
Been looking at these for my Casio PG 380 synth guitar. They made a stereo jack to split the guitar and synth in the guitar.
I use a Bluetooth reciever...
been using backing tracks like that for over a year... and its great
Nice! Which one do you use? And does it do stereo so I can separate left (click) and right (cues)?
Ahhhh. That’s what happened. ;) Well done as always. Cool idea using that unit to suit your needs. 🤘🏾💪🏾
Haha yeah you saw it happen! That’s why I went over to the hi hat stand. It was pretty bizarre. I have it charging now as well as not mounted to anything where it can get unplugged and it’s working well
Always great videos! I do something similar with Alto BT2 to Bluetooth audio to the mixer. Buy one, it's summed to mono, buy a pair, it's stereo. Removes all the need for adapters and short cables, and also means your source (iPad etc) is free of attachments.
Oh cool!! Thanks for sharing that. The Bluetooth works fine for you? You won’t have to worry about latency because everything will sync to whatever goes into your mixer. That’s pretty sweet! I might have to pick up a pair of those
Connection has been fine but I'd keep a backup plan in a bag just in case. Latency not an issue because it's for clicks, backing or playback - everything else syncs to the Bluetooth audio. You could also put them straight into your EV speakers to bypass the mixer. They charge on USB. No fancy case though.
My concern with going wireless for the backing tracks is the real possibility of the signal dropping out in the middle of a song. I like the idea of getting rid of cables or minimizing cables as much as possible, but I'm just not very confident in the reliability of the wireless devices yet.
I'm glad to hear that you have been using it as much as you do and are having great results. It reassures me that it can be reliable and I may give it a try.
Yup I agree for sure, it wouldn’t be good if it drops out during a song. Especially since this one is cheaper. But testing it at soundcheck and keeping clear line of sight and not a huge distance, it’s worked well!
Hey Scott, Great ideas and video. FWIW... I've been running our backing tracks wirelessly from an iPad using a Klark Technik DW 20BR stereo Bluetooth receiver to my Behringer x18 mixer and it works great. It has both unbalanced (2) 1/4" and balanced (2) XLR output jacks.
Nice! Yeah I have a Bluetooth stereo system by Xvive that works pretty well too!
Bought the NUX wireless in-ear system after watching your review. Ordered it of of Amazon in the US (live in Spain) and received in 4 days. Unfortunately after using it a week the on/off buton in the transmitter broke. The purchase was neatly refunded so kudos to the seller, but then found out the product is hardly available in Europe. Managed to order one set for a friend but when I re-ordered for myself it was out of stock. That was 4 weeks ago. Still not available and I really liked it. Have a standing order but still waiting…
I’m glad to liked it! Hopefully it shows up soon
Oh I have been trying to find something this for days!! Thank you so much, from one anti-cable guy to another. Another plus is that your iPad has less chance of being dragged to the floor by some Klutz tripping over the cable!
Glad I could help! Us anti-cable-dudes need to stick together! 🤝
I also like to make everything wireless, and have this nux. But I used the 2.4ghz monitoring system from m vave (way cheaper) and found the sound quality to be better in m-vave. The nux one have a white noise very perceptible when I play distortion. Anyway, it is a very good solution and I use daily in my home (speakers are far from audio interface)
That’s what some people have said when using it as an IEM system. But for wireless from a tablet has been crystal clear 👍
THE VIDEO I NEED AND BEEN LOOKING FOR ... I TRIED DOING WIRELESS METHOD FOR MY BTRACKS USING MY GUITAR WIRELESS SYSTEM ( NAVY / LINE 6 G10 ) BUT ITS SOUNDED MONO NOT STEREO EVEN WITH ADAPTERS ... BLUETOOTH ON OTHER HAND ISNT RELIABLE .. LATENCY ISSUES AND FEAR THAT IT WILL TURNOFF OR DISCONNECT ... DIDNT KNOW THAT A CHEAP IN EAR MONTIOR WOULD DO THE TRICK .... BIG THANX .. SUB!
Nice! Glad to help!
Lekato also has an in ear monitoring system, which i believe you've reviewed. That connects to the Red Lekato transmitter.
Oh yeah that one is stereo as well I believe! I haven’t tried that with this, but that will remove the need of the coupler 🤘 thanks for the suggestion
Cool
🤘🤘
I use a BT receiver at my mixer's end, and connect to the cell phone (Samsung S20) I use to deliver the backing tracks, through Setlist Helper. I also connect to the S20 a BT pedal to manage the lyrics. Haven't had an issue yet apart from the Bat units themselves failing. But connectivity wise, not a problem. Been doing it this way for more than 2 years.
Nice! Do you get L and R separated? Because I need that for my click and cues. I didn’t know that Bluetooth could do that
@@ScottUhlMusic I send the FOH backing tracks mix mono through the right channel. And the click and voice cues on the left, disconnected (unchecked) from the LR FOH mix.
I’ve used the Lekato stereo transmitter for backing tracks off an iPad and it worked great! Of course I made sure that was the only 2.5ghz I was using. 😂 The only slight problem I’ve run into (which turned out not to be the fault of the Lekato) was there was the slightest bleed of click running into the backing track. I checked my backing tracks to make sure I didn’t master them weird and listened through an interface to make sure the tracks were separated correctly when routed into different outputs, which they did with no bleed in the tracks channel. Going back to the iPad, I checked through multiple stereo break out cables as well as wired headphones and the bleed was there, but not when listening through wireless Bluetooth AirPods. When researching this on some forums, I saw some people saying that some older iPad and MacBook headphone-out jacks can have a little bit of cross talk between channels, which is lame. My iPad is a 2017 which doesn’t seem that old but I guess it is 😜 What was strange is, I never heard the track bleed into the click channel only click into the tracks channel. I ended up using a really low noise gate on the tracks channel on my mixer as it could only be heard barley when the track was on a part that was silence, so that was a quick fix that worked for the show. In the future I might end up using my HX Stomp as an interface to route those iPad channels through the lightning port and Stage Traxx into output 3/4 and use the Lekato to output through the HX Stomp send. Even though it really wasn’t noticeable in the end to the audience, it totally bothered me and I don’t want to have to put a noise gate on the track 😂 Any one else run into this problem?
Yeah some people say there is some small cross talk with iPads. It barely barely there, so it’s not noticeable live when I do it. But glad to see someone else is doing this!
@@ScottUhlMusic What is funny is I was mainly going to do it as a sound check solution. When playing with my smaller band, It’s usually a small bar type show with no sound person and a really crappy mixer, so I just plug my own mixer setup in and do it that way. So I got multiple wireless units just for myself so I can sound check in the audience while still running tracks, playing bass and doing some backup singing with the intention of hardwiring everything in for the actual show. Once I went to hardwire the iPad back into the mixer after soundcheck though, I realized the stereo breakout cable wasn’t long enough to reach the iPad where I needed it to be on stage. 😂 So, I just ended up keeping the wireless in for that and it worked great!
I used the lekato just for the click track back when we didn’t play to tracks and it worked well! Had no idea it was stereo
@@ScottUhlMusic I remember in a previous video you saying that it wasn’t true stereo and when I was using it and got the bleed I figured that’s what you were talking about. Turns out the bleed was a different problem altogether 😂.
Hey Scott nice video! Btw, as you are a Logic Pro for Mac user, I wonder, will you review the new version for iPad? I was considering buying the subscription as an alternative for my desktop option and a portable tool for working out of my place.
I kinda stopped doing Logic videos since they by far did the worst on my channel. I’m curious on the iPad version as well. I would need a mouse and keyboard is my guess. It would be weird to do all of that with a touch screen
Amazing… I was just thinking about this concept yesterday, Scott. I have the NUX system that you're talking about, after seeing your original video on it. The one thing I was wondering was about keeping the receiver away from any 5.8 GHz routers, since that's recommended with the transmitter. Did you get a chance to test that?
Yeah always keep 2.4ghz and 5.8ghz gear away from Wi-Fi routers for sure!
Brilliant as usual. If you weren’t using this, would your splitter cable be connected to the iPad on your mic stand? Love your wireless strategy and want to incorporate it as much as possible.
Yup, that’s the way I would do it without this (or if this gives me trouble) 👍
Hey. How about the non tech but important equipment that you use! Things like cases and bags, your iPad holder, how it connects, etc.
Interesting… I’ll definitely think about doing some videos on stuff like that! Thanks for the suggestion. That will be a bit different!
Would this work for dual guitar signals (using a y cable to it from both jacks on a PRS hollowbody piezo) so I don’t have to have 2 wireless jacks plugged in?
Possibly, I’ve never tried that. But read the comments on the other video… people have had problems with it using it in other ways besides for an ipad
The amazon link said that the IEM's are not suitable for silent practice. Have you tried using yours for silent guitar practice?
Watch the video I did on these for IEMs, and check the pinned comment. I do agree, don’t use for silent practice
Have you tried this with a guitar that has stereo output? I recently obtained an Emerald guitar but my NUX C-5RC cannot send/detect the Ghost piezo on that instrument. Sends the magnetic pickups (hum-buckers just fine), but nothing on the piezo side. It also has 13-pin MIDI output, so if there's a way to all of that wirelessly, that would be super cool. Not essential, but I too am a little obsessed with having no wires to step on.
Oh nice! No I have not. That would be interesting!
Hi, bro!! Thanks for everything!! And what happens if I connect the receiver direct to the channel without splitting? I know it'll be mono, but just one side, or left and right together? Thanks!!
It should just be mono 👍 just make sure the input is set to receive a mono signal.
@@ScottUhlMusic Thanks!! Yes, I have just watched your video about the Lekato 2.4 (the red and black) and it's suitable. 👍🏼
Hey man. Could you take a look at the JXSOU 5.8ghz wireless system ?.
It has great reviews and is really cheap.
I tried to mention where you can find it but youtube kept deleting my comment 💀. Lets just say that its on a place that starts with Am
I haven’t heard of that one, I’ll have to check it out, thanks!
Are you running those harbingers Cardiode?
No, I use EVs personally 👍
I want to ask whether the NUX B7PSM can be used on a guitar as a wireless system????
and is the quality the same as the NUX C5RC when used with a guitar instrument?
Or are there any differences between the two types?
I would go with the C5RC instead to be honest
@@ScottUhlMusic What made you choose the C5RC over the B7PSM as a wireless guitar?
Hi Scott, great channel. I think I have an interesting question (or a very stupid one): Is there a posibility to run track from different markers in DAW (for Midi to DMX and visuals) by 4 track cassette tape recorder (Fostex X28H) which is used for multiple backing tracks and click for drummer. It sounds complicated, I know, but why make things simple :D
P.S. If I understood correctly, SMPTE is useless if DAW is slave.
Hey man, that I don’t know to be honest! That does sound pretty complex
Hi Scott, That Stage Traxx looks great, but doesn’t do DMX. I currently use Show Buddy, as it does backing tracks with MIDI and DMX, and years ago used a product called Alien Apparatus, which was very buggy and only had 32 channels of DMX🤣
Is there anything else you’ve tried that has DMX and MIDI for backing tracks?
Cheers.
Not for iPad. I know OnSong does but it’s not my favorite. But I have this video on how to use midi to control DMX: ruclips.net/video/3Xm7Rep90Is/видео.html
What i pad holder you use?
I’ve switched between a few of them, I can’t remember the name of the one I currently use tbh
Nice review, but this setup is ridiculously overengineered (and I kinda like that) :P Like at 3:35, why not just run a headphone extender cable, the wireless units are like 2m apart in a straight line :) Is having clean stage worth that risk and all the charging etc?
It’s totally ridiculous! Hahaha, but I hate having cables under my feet. And that clip was an extreme example for sure. But it’s worth it for me… and also pretty ridiculous as well 😅
@@ScottUhlMusicand…. Informative!
I got an email supposedly from you that said I won a prize. After installing telegram and contacting you; we got down to the end and it said I’d need to pay the shipping. Must be one of your adversaries trying to get in my pocket. Oh well..live and learn.
Please tell me you did not send them money. I say in all of my videos that I will never ask you for money. Never, ever. Never will. I have a video on this coming out tomorrow
I cut them off when they were talking about shipping charges.
Awesome! I’m glad you realized that was a scam!
Yup completely unnecessary... for backing tracks because Bluetooth exists and if sound quality is an issue then use an ldac bluetooth.
Definitely not necessary. I did try Bluetooth before and had problems, so I like this one. And I don’t believe Bluetooth can seaparate L and R into my mixer right?
Bluetooth is dead 🎉🎉🎉🎉
Bluetooth is still useful in the right situations imo
You are adding too many weak points of failure.
Ehh… not really. This is “unnecessary” I agree. But this is the only “cheap” wireless I use. And like I mentioned, the cable is right by if I need it. I do agree that this is overkill, but it’s been working well… and I have a backup if I need to 👍
They are options. You don't have to do any of it
prety cool sistem, please the Divo sistem video
I would LOVE to see you do a full review of the CYMATIC AUDIO LP-16 and/or the CYMATIC AUDIO uTrack24
Didn’t they discontinue that? I looked into it at one point
Yes, it's discontinued. "But still" @@ScottUhlMusic
I use 2 slxd packs going into a splitter cable into the iPad. Works perfectly
Nice!
@@ScottUhlMusic DO you have a video about your wireless pedal board? I also really love a clean look on my stage as an audio engineer
Yup! ruclips.net/video/Ausw3WiCEtg/видео.html and ruclips.net/video/I18cSWc2vI4/видео.html