How to use 4x4 Keypad with Arduino | Keypad Basics Tutorial code Explained | Arduino Tutorial- 39

Part-39
In this video we have shown how the Keypad module works and displayed the Key_pressed on the serial monitor.
Code and Circuit :drive.google.c...
-*-*-*-*-*-*-*-*-*-*-*
Product Links:
Arduino Uno : amzn.to/3PqSME5
4x4 Keypad: amzn.to/3PyuasP
4x3 keypad: amzn.to/3LATzB8
*-*-*-*-*-*-*-*-*-*-*-*
Follow us on Instagram :
/ tech_at_home
Like us on Facebook :
/ tech-at-home. .
#keypad #arduinotutorials #techathome #4x4keypad #arduinoprojects #4x3keypad #buttonmatrix #arduinoprogramming #engineeringprojects #smartdoorlock #lcd #arduinouno
Thanks for watching!
*Like Share and Subscribe

[@josephkurwa9032]

Worth subscription hearts from Tanzania 🇹🇿

[@techathome]

Thank you for support

[@2031-w8l]

you explain it very well，i just watch it one time and i can do it myself，worth to subscribe

[@techathome]

Thank you ❤️

[@Maan_Arora]

hey i have a question, in the force feedback steering wheel, in the video you use a 1500rpm motor but then used pulley to reduce the rpm to 650rpm, couldn’t i just take a 650rpm motor?

[@techathome]

You can use 650rpm motor, but the motor should be able to provide good torque for better force feedback.

[@shardyphotographic]

Thank you for explaining so clearly

[@techathome]

Welcome ❤️

[@indiancyber5611]

How to use ffb steering with pedals and H shifter

[@Runel713]

Yeah so... For me the first 4 variables can't be char, but have to be byte, or else i get errors, and then nothing gets displayed in the serial monitor

[@newthinkofficial]

Please make a video for how to make big servo using wiper motor and control it with flysky transmitter

[@vamanbhagat5817]

Hi plz make video on wet dry segregation video

[@FifthDimensionRobotics]

I am pressing some button it is showing other

[@FifthDimensionRobotics]

for example i am pressing 2 but it is coming C

[@techathome]

Row and column pins connections might be wrong. Recheck..

[@aaroncharles9203]

Op bro nice

[@techathome]

Thank you

[@IOTgeek]

always a 1 in Serial Monitor, what should I do ? Even if I disconnect the keypad, and open serial monitor it shows 1 only. Please help🥲. Same result with both nano and uno boards. 😢

[@IOTgeek]

I did exactly same the way you showed in this tutorial. Used your codes, your defined library, pin connections all same still getting same issue.😢

[@techathome]

It is showing 1 every time which means Arduino is not getting any input from keypad.
The row, column pins in the code and pin connections done might be not matching. Check once.

[@IOTgeek]

Thank you very much, sir. I found the mistake in my keypad connections, I forgot to mention earlier that I have been using custom made 4x4 keypad ( thought a bit before buying the keypad you are using, and made my own one) . So found soldering problem in the keypad. Thanks for your help. Love from odisha ❤

[@techathome]

Welcome ❤️