Guys, if this video helped you, please consider subscribing to the channel as with new youtube policy i need to have 1000 subs in order to stay youtube partner. It means a lot to me. Thanks!
Thanks for replying i really appreciate it. Taking off the glass was a nightmare. But i got it done in the end. You made it look too easy. I would not of ever got that done without your video. Thanks again
+marvin tait i did not make it easy, i did not cut off any part, i just speed it up a litle bit so video doesnt take 2 hours :) but it is a proces that takes time, adheive that holds it is very strong :) glad you made it
Thank you, Thank you, for this video! I was repairing my tablet, and if it was not for the part in the video where you were testing the screen and noticed something was not right and pushed the cable in securely I would have thought the tablet had further damage!! Nope I had the same problem cable was not pushed in hard enough! Now it works great!!
This video will be helpful. My little daughter cracked her ME170C, corner to corner, and got a new Lenovo. But she still keeps borrowing her sister's Asus. It was her favourite and the Lenovo didn't fill that hole.
+marvin tait the digitizer came with it's own adhesive pre attached. but if it didnt id use double sided tape wide as the bezel of device. id say 10mm 3m double sided tape would do the job :)
+christian tatsinkounde im not sure, but i think it is same procedure, just make sure that it does not have optically clear adhesive between glass digitizer and lcd. hope you understand what i mean. you can send me photos of your phone on my hangouts chat and i will confirm it for you :)
great video, what liquid you out on the plastic when you're trying to pry open the touch screen? and I also I don't see you glue the new TS back, is that possible? Thanks
+Abelius high concentrated isopropyl alcohol (97% and up) but 70% will do the job but not as good as this one. it helps loosen up the old adhesive. but be carefull not to put too much cause it maight seep into lcd, like it hapened to me, so i had to dry backlight out, you can see in my other video how to do that. do not use too much alc. :)
I replaced the screen on my son's ME170C but it is not as responsive as it should be. Sometimes you have to press a few times or rotate the screen to make it work. This makes it very bad for fast games. Any ideas what could be the problem? I used double sided tape around the edges of the screen to stick it back down. I did not remove all the old adhesive as I thought that could only help hold the screen in place.
+Stephen Whiddett you should have removed original adhesive and put new one, or leave just the old one if perfect condition wich is posible only by miracle and luck. i think that bad responsive touch can be due to bad dobulesided tape but it is less likely, it can be due to defective digitizer touch panel or die to bad connection onto motherboard or bad grounding of digitizer to the device
+Marko Žutić The old glue is around the edge of the LCD display. I left the remaining old adhesive as I did not think it would be a problem. The new adhesive I applied closer to the edge of the screen - not where the old adhesive was. Do you think its worth taking the screen off again and removing the old adhesive?
Stephen Whiddett maybe the digitizer is faulty itself, if the described behavior is not accepted by you or person using device it is of course worth taking screen off, and trying to fix it.
+Marko Žutić thanks for that link but i have to ship it in india.. do u think any problem might occur while shipping?plz suggest me what do i prefer..indian websites has same product but in very high rates!!
etradesupply ships from china, i dont know what is india's import policy, but i had no problems shipping it to serbia. i had to pay few dollars for importing costums rate and thats all. you wil also wait 20-30 days
well sometimes they come with digitizer, sometimes they dont. but i bought my tools locally, very cheap. you need just a regular philips screwdriver which is small in size and usual guitar pick you can get at music store or get from friend that plays guitar. thats' all
Pozdrav, uzeo sam neki polovan Fonepad i digitajzer nije dobro zalepljen (ocigledno je menjan), cak sta vise moze da se odvoji i dise, pa se pojavljuju ghost touch-evi i slabije reaguje. Vidim da je koriscena neka traka za lepljenje. Jel imas neki savet kako to da resim u kucnoj radinosti? Hvala!
+flatlinens09 ako se pojavljuju ghost tačevi - onda novi tač samo moze da pomogne. a pre toga ga mozes zalepiti nekim lepkom na bazi silikona ili tim duplo lepljivim trakama, ili u krajnjem slučaju neki lepak na bazi gela (loctite easy fix) sto je solucija koju najmanje preporucujem :D
+Marko Žutić nisam siguran da je otisao tac, jer nije dobro fiksiran, u sredini je onako malo i napregnut jer ne drzi lepak, a deluje mi kad pritisnem skroz do kraja ceo tac (da nalegne na kuciste) da reaguje normalno, dok se opet ne otpusti. Posto se nakupilo prasine sa unutrasnje strane, sta preporucujes za ciscenje, a da ne osteti tac?
My daughter cracked her digitizer 6+months ago. The tablet would come on just fine but screen non-reponsive. It sat and I finally got new digitizer and attempted to put it in. I should have charged it and then tested it before starting to make sure everything was working before starting but I didnt. So i took it apart and removed digitizer. Put MB back in and connected things up (except new digitizer) and tried to start it and the backlight comes on-sometimes red at first, sometimes with lines through it, but it eventually goes to solid white. But there is never anything else. No signs of it booting? I had everything out when heated for digitizer removal so MB should not have been damaged. removed all cables and re-plugged them in including ribbon to lcd. any thoughts?
nothing visible. it did stick to digitizer as I was prying it up but I noticed and didn't pull too hard. Makes no difference if digitizer connected or not.
hi ton all asus company can i ask a question ??? what can i do for my ASUS FONETAB 7 is not working i think the program has corrupted tell me guys how back my program setting tnx!!! guys
I am very ssd to hear that. Maybe some of your buttons are stuck? Check volume and power button id it is stuck and also check if everything is well connected. It can alsp be a software or hardware problem.
Marko Žutić power button and volumes are working fine. I found that I could access the phone set up by holding down power + vol up, and browse the menus. I tried a factory reset and also recovery...but the actions don't complete and show an "error" after a few seconds. And when I turn on the phone, it shows the Asus / Android first screen :(
Its me again (Ron B and T Dante same person lol) I checked connections, I could count a total of 8 connections to the motherboard which I checked and rechecked...do you think I am missing something :(
i dont know... as you can see in video i powered it on and off few times without all flet cables (only screen and buttons were conected) and it worked and aswell in end when i put all together, maybe you damaged the mobo with a metal tool or something, can you boot into download mode or recovery?
подскажите кто может. забыл на столе планшет asus фоне пад 7 ME372CG kooe пошел дождь и он намок. я его с перепугу разодрал можно сказать. разбирал много раз.а в этот раз вместо открытия крышки начал отдирать тачь. разобрать хотел чтобы отключить батарею и просушить его срочно. в общем угробил тачь. сейчас экран после того как включил еле светится по краям черная рамка. изображения нет. но он работает. звук есть. клавиша громкости издает звук при нажатии. при подключении зарядки срабатывает вибро. в общем вроде живой. шлейф который идет на экран был закислен. при осмотре сгорели два контакта это одна дорожка которая раздваивается. если отключить шлейф от платы и посмотреть на него из нутри то это вторая широкая дорожка с правой стороны. таж же дорожка с обратной стороны шлейфа то есть эти два контакта были закислены. под паялся проводком зачистил но толку ноль. не знаю куда дальше копать. рядом со шлейфом микруха на ней было вверху закислено. первые два контакта вверху видно что их подело. а следующих двух контактов совсем нет. то есть третьего и четвертого контакта. на третий контакт идет дорожка которая так же идет и на второй контакт справой стороны микрухи. пробовал под паять не получается. может кто мне написать мастера на экран на плате стоит разъем под шлейф. так вот просьба большая к вам напишите какое напряжение на каждом контакте с отключенным шлейфом экрана чтобы я определил что с платой. заказывать мне новый экран или тачскрин с экраном или еще что то. моя почта 26ale@mail.ru. буду очень благодарен вам.
Aj dont panjimajem ruski, Али требао би да покушаш са чишћењем оксидације са контаката ЛЦД екрана на матичној плочи, користи алкохол или ултрасоничну каду за чишћенје такође вероватно мораш да купиш нови ЛЦД екран у комплету са дигитајзером. алиекспрес је добар извор за куповину.... надам се да ће ти прорадити
Guys, if this video helped you, please consider subscribing to the channel as with new youtube policy i need to have 1000 subs in order to stay youtube partner. It means a lot to me. Thanks!
Thanks for replying i really appreciate it. Taking off the glass was a nightmare. But i got it done in the end. You made it look too easy. I would not of ever got that done without your video. Thanks again
+marvin tait i did not make it easy, i did not cut off any part, i just speed it up a litle bit so video doesnt take 2 hours :)
but it is a proces that takes time, adheive that holds it is very strong :)
glad you made it
Thank you, Thank you, for this video! I was repairing my tablet, and if it was not for the part in the video where you were testing the screen and noticed something was not right and pushed the cable in securely I would have thought the tablet had further damage!! Nope I had the same problem cable was not pushed in hard enough! Now it works great!!
awesome, glad i could help :D
This video will be helpful. My little daughter cracked her ME170C, corner to corner, and got a new Lenovo. But she still keeps borrowing her sister's Asus. It was her favourite and the Lenovo didn't fill that hole.
+MrSweck71 you're welcome, good luck repairin' :)
Good Video, What did you use to stick the screen back down.
+marvin tait the digitizer came with it's own adhesive pre attached. but if it didnt id use double sided tape wide as the bezel of device. id say 10mm 3m double sided tape would do the job :)
+Marko Žutić , great video , very good job.. I would like to know if this procedure can work to repair the digitizer of the ASUS FonePad 6 ME560CG ?
+christian tatsinkounde im not sure, but i think it is same procedure, just make sure that it does not have optically clear adhesive between glass digitizer and lcd. hope you understand what i mean. you can send me photos of your phone on my hangouts chat and i will confirm it for you :)
ok +Marko Žutić .. I have ready sent you a request on hangout.
great video, what liquid you out on the plastic when you're trying to pry open the touch screen? and I also I don't see you glue the new TS back, is that possible? Thanks
Alcohol, new touchscreen comes with the glue preapplyed
Marko Žutić thanks again man
Thank you very much for the useful tutorial. Looking at your video I was able to replace my touch screen!
youre welcome :)
please tell me where i can find touchscreen of this tablet
hello bro can i ask you a question are ME170C ME170 the model number and how can i find the model number of my asus k012 digitizer thanx
Nice. Could you tell me what liquid did you put in the plastic films? :)
+Abelius high concentrated isopropyl alcohol (97% and up) but 70% will do the job but not as good as this one. it helps loosen up the old adhesive. but be carefull not to put too much cause it maight seep into lcd, like it hapened to me, so i had to dry backlight out, you can see in my other video how to do that. do not use too much alc. :)
+Marko Žutić Thanks for the prompt reply! I have 96% alcohol indeed. I'll follow your advice and be most conservative. ;-)
you're welcome :)
Muchas gracias. Me fue de mucha ayuda.
+Walter Rodriguez You're welcome :D
Nice video and nice music.
Bravo Marko! Odlican video. Sto bi komsije rekle: "Profesionel".
Hvala. :)
I replaced the screen on my son's ME170C but it is not as responsive as it should be. Sometimes you have to press a few times or rotate the screen to make it work. This makes it very bad for fast games. Any ideas what could be the problem? I used double sided tape around the edges of the screen to stick it back down. I did not remove all the old adhesive as I thought that could only help hold the screen in place.
+Stephen Whiddett you should have removed original adhesive and put new one, or leave just the old one if perfect condition wich is posible only by miracle and luck.
i think that bad responsive touch can be due to bad dobulesided tape but it is less likely, it can be due to defective digitizer touch panel or die to bad connection onto motherboard or bad grounding of digitizer to the device
+Marko Žutić The old glue is around the edge of the LCD display. I left the remaining old adhesive as I did not think it would be a problem. The new adhesive I applied closer to the edge of the screen - not where the old adhesive was. Do you think its worth taking the screen off again and removing the old adhesive?
Stephen Whiddett maybe the digitizer is faulty itself, if the described behavior is not accepted by you or person using device it is of course worth taking screen off, and trying to fix it.
From where did you purchased that digitizer and in how much price ?
+Abhishek Jha i updated the description with link
goo.gl/hee3Np
+Marko Žutić thanks for that link but i have to ship it in india.. do u think any problem might occur while shipping?plz suggest me what do i prefer..indian websites has same product but in very high rates!!
etradesupply ships from china, i dont know what is india's import policy, but i had no problems shipping it to serbia. i had to pay few dollars for importing costums rate and thats all. you wil also wait 20-30 days
ohh thankss!
and where do i purchase that screw driver?..or i say those tools!
well sometimes they come with digitizer, sometimes they dont. but i bought my tools locally, very cheap. you need just a regular philips screwdriver which is small in size and usual guitar pick you can get at music store or get from friend that plays guitar. thats' all
please answer my question?
where can i buy the new glass for screen
link in description
in how many days was the digitizer delivered to your country and how much was the exect cost?was there any other charges?
something like 3 weeks, cant be precise anymore :)
customs took their share, so thats all of the charges. :) - it is easier to cheat death then customs in my country (serbia)
hi! can i use the same digitalizer found on asus memo pad 7?
voce sabe como instalar o firmware de fabrica nele não estou conseguindo no meu
Pozdrav,
uzeo sam neki polovan Fonepad i digitajzer nije dobro zalepljen (ocigledno je menjan), cak sta vise moze da se odvoji i dise, pa se pojavljuju ghost touch-evi i slabije reaguje.
Vidim da je koriscena neka traka za lepljenje.
Jel imas neki savet kako to da resim u kucnoj radinosti?
Hvala!
+flatlinens09 ako se pojavljuju ghost tačevi - onda novi tač samo moze da pomogne. a pre toga ga mozes zalepiti nekim lepkom na bazi silikona ili tim duplo lepljivim trakama, ili u krajnjem slučaju neki lepak na bazi gela (loctite easy fix) sto je solucija koju najmanje preporucujem :D
+Marko Žutić nisam siguran da je otisao tac, jer nije dobro fiksiran, u sredini je onako malo i napregnut jer ne drzi lepak, a deluje mi kad pritisnem skroz do kraja ceo tac (da nalegne na kuciste) da reaguje normalno, dok se opet ne otpusti.
Posto se nakupilo prasine sa unutrasnje strane, sta preporucujes za ciscenje, a da ne osteti tac?
alkohol, 96posto
Donde Puedo Conceguir El Touch Screen??? De Esa Misma Tablet
you have links in description, ebay, amazon, expressible. whenever you find it convenient for you
My daughter cracked her digitizer 6+months ago. The tablet would come on just fine but screen non-reponsive. It sat and I finally got new digitizer and attempted to put it in. I should have charged it and then tested it before starting to make sure everything was working before starting but I didnt. So i took it apart and removed digitizer. Put MB back in and connected things up (except new digitizer) and tried to start it and the backlight comes on-sometimes red at first, sometimes with lines through it, but it eventually goes to solid white. But there is never anything else. No signs of it booting? I had everything out when heated for digitizer removal so MB should not have been damaged. removed all cables and re-plugged them in including ribbon to lcd. any thoughts?
you maybe cracked the lcd, does it works normally when digitizer is unplugged?
nothing visible. it did stick to digitizer as I was prying it up but I noticed and didn't pull too hard. Makes no difference if digitizer connected or not.
hi ton all asus company can i ask a question ??? what can i do for my ASUS FONETAB 7 is not working i think the program has corrupted tell me guys how back my program setting tnx!!! guys
+Merlin Erod Erodiaz what program is corrupted? can you give a little bit more information about your fonetab
Na koju tempertauru stavljas duvaljku?
+Milos VR6 160-170C
my fonepad fe171cg stuck on usb logo,can you do something?
same as K01A, THANKS!
+Pepes940 you're welcome, subscribe! B)
How many pins lcd flexible?
didnt understand that one :(
Marko Zutic im looking for flexible lcd of teclast x80hd but hard to find, that one on video similiar, that why i’m asking you how many pins
Imam isti model tableta sa istim problemom, da li si raspolozen da mi pomognes sa zamenom stakla? Koliko bi to kostalo?
javi se na hangouts ili putem email-a :)
Hello, I did everything like this video, but when I power ON my device, its stuck at the ASUS screen. What can I do to fix this ? :(
I am very ssd to hear that. Maybe some of your buttons are stuck? Check volume and power button id it is stuck and also check if everything is well connected. It can alsp be a software or hardware problem.
Marko Žutić power button and volumes are working fine. I found that I could access the phone set up by holding down power + vol up, and browse the menus. I tried a factory reset and also recovery...but the actions don't complete and show an "error" after a few seconds. And when I turn on the phone, it shows the Asus / Android first screen :(
Marko Žutić I commented from my other account.
Its me again (Ron B and T Dante same person lol) I checked connections, I could count a total of 8 connections to the motherboard which I checked and rechecked...do you think I am missing something :(
i dont know... as you can see in video i powered it on and off few times without all flet cables (only screen and buttons were conected) and it worked and aswell in end when i put all together, maybe you damaged the mobo with a metal tool or something, can you boot into download mode or recovery?
veramente comprensibile
hello ! i 'm verry bad english but i want question ! what solution !! ^^ thanks
+Hn Lee Hello, i did not understand what is your question? :)
what solution ??? ^^ i stupid english ^^
i still did not understand your question, sorry...
+Marko Žutić I suppose he ask you what liquid you are using in that bottle
99% alcohol :)
but 70% alcohol will do the job too.
como trocar tochy do zefone 5 a 501
подскажите кто может. забыл на столе планшет asus фоне пад 7 ME372CG kooe пошел дождь и он намок. я его с перепугу разодрал можно сказать. разбирал много раз.а в этот раз вместо открытия крышки начал отдирать тачь. разобрать хотел чтобы отключить батарею и просушить его срочно. в общем угробил тачь. сейчас экран после того как включил еле светится по краям черная рамка. изображения нет. но он работает. звук есть. клавиша громкости издает звук при нажатии. при подключении зарядки срабатывает вибро. в общем вроде живой. шлейф который идет на экран был закислен. при осмотре сгорели два контакта это одна дорожка которая раздваивается. если отключить шлейф от платы и посмотреть на него из нутри то это вторая широкая дорожка с правой стороны. таж же дорожка с обратной стороны шлейфа то есть эти два контакта были закислены. под паялся проводком зачистил но толку ноль. не знаю куда дальше копать. рядом со шлейфом микруха на ней было вверху закислено. первые два контакта вверху видно что их подело. а следующих двух контактов совсем нет. то есть третьего и четвертого контакта. на третий контакт идет дорожка которая так же идет и на второй контакт справой стороны микрухи. пробовал под паять не получается. может кто мне написать мастера на экран на плате стоит разъем под шлейф. так вот просьба большая к вам напишите какое напряжение на каждом контакте с отключенным шлейфом экрана чтобы я определил что с платой. заказывать мне новый экран или тачскрин с экраном или еще что то. моя почта 26ale@mail.ru. буду очень благодарен вам.
Aj dont panjimajem ruski, Али требао би да покушаш са чишћењем оксидације са контаката ЛЦД екрана на матичној плочи, користи алкохол или ултрасоничну каду за чишћенје такође вероватно мораш да купиш нови ЛЦД екран у комплету са дигитајзером. алиекспрес је добар извор за куповину.... надам се да ће ти прорадити
how to reinstall asus koos
+med tee reinstal software?
Nie di mana ya