damn i wanted to watch this but you sounded so sad that it made me sad and think about all this sad shit that's happened in my life and now ill never know how to make my own Scuf controller
i am mexican using google translator, i start crying way before i translate this comment. i am lost same like thissss hooooo my goshhhhh............i am going to my bed
Next time don't scrape the pads for the switch, just follow the traces on the board until you are not near where the rubber membrane pad will be, then scrape the solder mask off of the trace at that point and solder to that location.
please make a video on how to add small amounts of solder to the button area. everytime i add too much and the button because unusable except the button i am adding
ey if i send you my xbox one controller can you do it for me?and can you also fix its right and left thumbstick because they keep on facing up ignore for example when i okay fifa and i am choosing team or any other game they keep on getting stuck!!plz can you do it?
would be cool to remap the ABXY to the back and changing the ABXY at the front to fully customizable buttons on the PC (like keyboard keybinds without affecting the ABXY at the back :D)
why did you connect the buttons to A and B? i mean, don't you already have those buttons? wasn'it more practical to sodder them to L3 and R3? i never use them.
+Blake hill this is honestly pretty straight forward. theres no short hand for anything and he shows exactly how to do everything. his tone in the video might be a little off putting, but not everyone is the best at commentating.
+ZirJohn i actually live in Africa and its not what people think it is, the lions don't bother anyone when they walk on the streets and our pet elephants are very mobile in traffic
I already have a scuf but wanted to see an attempt on making one homemade and as i predicted, its complicated af! Just buy one if youre greedy or if you don't have the money get this idea out of your head unill you can afford one
I bought some paddles and it doesnt tell me how to remap and i dont know if i need to remap it to my needs because it doesnt tell me so if i install them on what will happen?
eVCephei yes play claw, your left hand stays the same and your right hand changes position on the controller. Tour middle finger is used for the RT and RB button, pointer finger is used for th A B X and Y buttons, and your thumb stays on the thumbstick, it takes a couple weeks to get used to but its free. Took me about a week to get used too it but 2 weeks to pick it up in that position but it DOES help cause you can jump and shoot or reload and look around while not even taking your thumb off of the thumbstick. Also if you dont believe it helps check out Optic Scump, he plays like this and hes one of the best COD players
didn't this guy do the voice for Milton in office space ?? imagine him saying the following words lol [talking on the phone] And I said, I don't care if they lay me off either, because I told, I told Bill that if they move my desk one more time, then, then I'm, I'm quitting, I'm going to quit. And, and I told Don too, because they've moved my desk four times already this year, and I used to be over by the window, and I could see the squirrels, and they were merry, but then, they switched from the Swingline to the Boston stapler, but I kept my Swingline stapler because it didn't bind up as much, and I kept the staples for the Swingline stapler and it's not okay because if they take my stapler then I'll set the building on fire...
Pre K™ Get squidgrip. Its really really bad to make your own cause the material wont be sweat resistant, it wont be the feeling meant for a controller you know ect. Just get squidgrip its like 15$ and at the store (walmart, gamestop, bestbuy, if not tell them to ship it for free to them.)
I cringed when you drilled the holes into the back of the controller. Looked like it was gonna snap at any minute. Could this same technique work on an afterglow controller?
i rather save my time and get a scuf controller cuz 1 its easier 2 its feels good holding it and 3 there are designs and 4 some people might screwup the controller
i love the enthusiasm in your voice
😂
Underrated comment
damn i wanted to watch this but you sounded so sad that it made me sad and think about all this sad shit that's happened in my life and now ill never know how to make my own Scuf controller
lol
+AMA2much im glad i made an impact on ur life
+ZirJohn xD oh my god
***** fucking dieing on the floor laughing because of you
i am mexican using google translator, i start crying way before i translate this comment. i am lost same like thissss hooooo my goshhhhh............i am going to my bed
how many of you skipped through the unscrewing of the controler
Me lol
ItsJawzGaming me
yea haha
+ItsJawzGaming about 100% of the people, all he should have done is just fast forwarded it or time lapse, or just cut it out, not too difficlult
Tru Tru
idc what they are saying about your voice this is a dope video!
2:51 I came in like a wrecking ball
haha underrated comment
Video started, I spontaneously fell asleep.
How the fuck are you commenting stop trying to be funny
Syed Imran They're obviously commenting because they woke up.
Lol
The easiest tutorial I find
This video helped me make a business and I am constantly selling controller thank you so much!!! Btw I think u did the video really great
Btw if you want to find a piece of thick plastic and engrave words on it to make it look better to sell for the paddles
This thing works Wow
I didn't do this, instead, I went and played and actually got good, keep your tricks, I'm still gonna win
good shit but some people take competitive serious lol (not this guy btw xD)
Btw u had a reason to click in this vid ;))
Next time don't scrape the pads for the switch, just follow the traces on the board until you are not near where the rubber membrane pad will be, then scrape the solder mask off of the trace at that point and solder to that location.
Jeeze, that intro had me expecting someone with energy. Your background music is louder than you.
+Reavermyst k
hahahaha
I read this as "kaaaaaaaaaaay................"
please make a video on how to add small amounts of solder to the button area. everytime i add too much and the button because unusable except the button i am adding
3:00 i came in like a wreckin ball
Lol XD
lol L(・o・)」
Lol
i think you should have used countersinking screws ::)
The music was sick too man!
how to break the controller so you can go buy another one. Guys this is the best promotion ive ever seen.
Nice vid bro, gonna try this as soon as i can
all that hyped techno music and i still fell asleep while listening to your dull, tired voice
hmu when u need a baby sitter
coke20x savage
ZirJohn savage
Awesome tutotirla man,
this guy sounds a bit depressing
+Keaton Lawless "this guy" as if you aren't commenting to me
well sorry +ZirJohn you sound a bit depressing in the video, maybe a tip for future videos 👍🏽
+ZirJohn lmao
a hot failure
prolly rollin 2 hard at these festivals
+ZirJohn he's kinda speakingg to the whole audience. but its alg, you just sound calm and this dude must be used to the classic ott yt type
Sweet bro nice vid
well done liked and subscribed
Anyone who uses Blackmill on their intro deserves my subscription 😎
cool it worked!!
Nice Blackmill intro bro
ey if i send you my xbox one controller can you do it for me?and can you also fix its right and left thumbstick because they keep on facing up ignore for example when i okay fifa and i am choosing team or any other game they keep on getting stuck!!plz can you do it?
Do I need to wipe the cheese off the sticks first ?
I like how when the bass dropped he dropped the screw driver 😂😂😂😂😂
would be cool to remap the ABXY to the back and changing the ABXY at the front to fully customizable buttons on the PC (like keyboard keybinds without affecting the ABXY at the back :D)
Someome please make a Wii U SCUF mod.
when opening the controller should we also drop the screwdriver? lol just messin.. good vid! :) good idea with the ritz stix haha genius!
why did you connect the buttons to A and B? i mean, don't you already have those buttons? wasn'it more practical to sodder them to L3 and R3? i never use them.
Very nice.
This vid is really confusing
It made my brain fly to Africa
the kids in africa will eat your brain if you leave it too long, you know how it is out there.
+Blake hill this is honestly pretty straight forward. theres no short hand for anything and he shows exactly how to do everything. his tone in the video might be a little off putting, but not everyone is the best at commentating.
+ZirJohn i actually live in Africa and its not what people think it is, the lions don't bother anyone when they walk on the streets and our pet elephants are very mobile in traffic
I don't think it's at Africa I flew here to check but all I see is Ebola
I know I shouldn't joke about Ebola but
Lol
+Skippy J leave em they don't have knowledge bout the world
it really work
Instead of the back put it. Slightly on the handles
I already have a scuf but wanted to see an attempt on making one homemade and as i predicted, its complicated af! Just buy one if youre greedy or if you don't have the money get this idea out of your head unill you can afford one
The soder just doesn't stick to the material where I scrapped off
I bought some paddles and it doesnt tell me how to remap and i dont know if i need to remap it to my needs because it doesnt tell me so if i install them on what will happen?
what are the specs for the tac switches? Trying to order some but theirs so many contact configurations and contact current rating options!?
howd that only cos you 17 dollars?
Bat was that like cream that you put on the buttons
nice job.
"hey wake up" - Anyone else who had ts3 up and checked if you got poked?
Yeah xd
Thanks so much
Where did you buy the switch? I can't find the right size
Good video just sound more exited when u talk!
Can you send a link of the shop were you find all the equiptment
(Sry my english is bad)
nice.
can you use super glue instead of solder
Can we get links to where you bought the tacts at?
I know this was 5 years ago but this work with xbox controller
I'll probably never get answer
Deez nutz
Yeah, please show you putting it back together, and what the benefits are.
i ordered the wrong size of the tac switches....
thx it helped (: i like your channel...these guys saying you sound depressed are losers lol
+Syncronix gaming :-))) thanks
whats the music for your into!!!!!! i always hear it and cant find it
What does this do to ur Controller dose it make it like a modded or what??
yo thanks m8
Hey Man, nice vid. Just a quick question, can it be any coloured 20AWG wire? I searched it up on eBay and different colours came up?
Does it matter what side you solder the wire to the tact switches?
This diy seems too boring for me.
You should also be using kynar wire and not that lowes thick copper wire
"alright guys, save $150 on a Scuf. First, use your $4000 drill press and $200 worth of electrical wiring tools..."
+BassasaurusRex easy alternatives
Can't get mine to work I think it's the wire I used
It fuckin works oh shit
Could you please do one for PS3 controller,I have been looking for good videos that show me exactly where to solder the wires to.
And do you need the tact switches to have 2 legs or would four be okay.
Vicken hairigian 4 is fine
umm thanks for the tutorial umm i really liked it umm liked umm idk what else to say umm so umm bye
Wow... I applaud your attempt, but for your next instructional maybe write a script or something. It'll make your dialogue more fluid.
ALL I WANT IS THE ABILITY TO PRESS 'A' ON THE BACK ....is there a simpler way of doing this
eVCephei yes play claw, your left hand stays the same and your right hand changes position on the controller. Tour middle finger is used for the RT and RB button, pointer finger is used for th A B X and Y buttons, and your thumb stays on the thumbstick, it takes a couple weeks to get used to but its free. Took me about a week to get used too it but 2 weeks to pick it up in that position but it DOES help cause you can jump and shoot or reload and look around while not even taking your thumb off of the thumbstick. Also if you dont believe it helps check out Optic Scump, he plays like this and hes one of the best COD players
Adam Mackell get a life
THYCR3ATOR Nadeshot is one of the best and he uses a scuf..
Acid Designs nade shot is one of the worst
OddWolf-- Everyone is entitled to their own opinion.
Is there a gameplay video
Hey Guys What You can use also is Called Flux ... that the key word you call also use that
Any idea how to do this for a ps4?
Wouldn't the homemade version cost more? The cheapest 360 one is like $70 and an Xbox One is like $100
how did you get that controller
This might sound stupid but does this work on ps3 controllers too ??
***** yes it does, but the contact points are different
didn't this guy do the voice for Milton in office space ??
imagine him saying the following words lol
[talking on the phone] And I said, I don't care if they lay me
off either, because I told, I told Bill that if they move my desk one
more time, then, then I'm, I'm quitting, I'm going to quit. And, and I
told Don too, because they've moved my desk four times already this
year, and I used to be over by the window, and I could see the
squirrels, and they were merry, but then, they switched from the
Swingline to the Boston stapler, but I kept my Swingline stapler because
it didn't bind up as much, and I kept the staples for the Swingline
stapler and it's not okay because if they take my stapler then I'll set
the building on fire...
+fredellioty that was me
Hello, what does flux covered electrical wire mean? Does that mean flux does not need to be purchased? Thank you
It means that when you buy the solder you want to make sure it has flux in it and then precoat the wire in solder
Flux you say...
+Fluxx Ambition ha haaaa the puns and isytown you dont need flux with flux wire
Thx i am stuck on the part were u battery died
what size is the drill bit?
wheres the rest of video?
Working with PS4 pad?
can i also buy it?
#monotone
Can u do exactly what u did for a ps4 controller?
+kian shirvani agreed
What would happen if you use 30 awg wire?
pretty much any wire is fine if it fits, there doesn't need to be much flow for it to work
where to buy?
Yeah..... I rather buy it
where did you get the switches at?
Get them from Amazon their 100 for less than $3
could you show how to add grip to a kontrol freek??
yh or could you show how to add grip to the controller
Pre K™ Get squidgrip. Its really really bad to make your own cause the material wont be sweat resistant, it wont be the feeling meant for a controller you know ect. Just get squidgrip its like 15$ and at the store (walmart, gamestop, bestbuy, if not tell them to ship it for free to them.)
thx m8
intro song?
Bro i thought he was joking when he said ritz
Yo, can I send you mines to be done or buys yours from you?
what is intro song?
so u didnt even display if it worked lol GREAT!!!
Nobody said its working 😬
cool video looks complicated though.
I cringed when you drilled the holes into the back of the controller. Looked like it was gonna snap at any minute.
Could this same technique work on an afterglow controller?
whatever you do, DON'T drill that. I've got one of those controllers and it will shatter.
just burn the plastic by burning the tip of the screw
Rem Cflight That's how I did my trigger stops and that's how i'm going to do the paddles
i rather save my time and get a scuf controller cuz 1 its easier 2 its feels good holding it and 3 there are designs and 4 some people might screwup the controller
Lol scuf cost like 170$ more but okay :/
BronzePlays EXTREME i can get one with scuf grip for xb1 and raised right dome stick for $136 tf are you looking at
captain brosef maybe because you live in america? k my comment is a little bit incorect
ahh that clears it up
Song?
Hey man if you live in the US can I ship you my controller ill pay $30 for you to add the paddels or even more if need be?
I have a ps4 controller btw
i think you can send it to scuff and they will "scuff up" your controller, idk how much it costs.
It's 44 I think