Absolutely stunning,the ebony is so beautiful and the finial you turned is spot on.love the contrast of colours in the wood. Arigatou gozimasu for sharing with us.😘😘
Beautiful work. Definitely not an easy piece of wood to work with. I think my father worked with it long ago and recall it being quite difficult to turn, but he was able to manage it.
Thank you for your comment 🙇 Ebony is very hard wood🪵 I found it easier to cut with a carbide tip than with a gouge. It's still hard, so I don't want to use ebony for a while. lol Getting from Japan 🇯🇵
Beautiful! I can see from your video that I would be hard pressed to ever turn a significant piece of ebony on my little harbor freight lathe. lol. Well done, Sir! 🫡
Thank you for your comment 🙇 I'm happy to hear that! This lathe is compatible with works up to a maximum diameter of 30cm, but the VL300, which has a maximum turning diameter of 60cm, is rarely available. lol Getting from Japan 🇯🇵
@@YamabikoWoodArt I’m in the state of Alabama in the United States. I’ve been a subscriber for a long time and look forward to your videos! Thank you for the content 😎👍🏼
@@joker747A I'm happy to hear that🙇 I have had health problems for a long time. However, now that I'm feeling better, I'd like to start posting little by little. The dog is very energetic🐶 Have a happy day 😊 Getting from Japan 🇯🇵
Thank you for your comment 🙇 Since ebony is hard, it seems to work better with carbide tips than gouges. But I don't want to make any more ebony pots. lol Getting from Japan 🇯🇵
Nice video. The can/vase looks great! 👍 I once turned a box, also with a lid and a similar tip. Only I turned a loose ring into this tip, which can be moved but not removed.
Той, хто назвав відомий усім пластик ебонітом, мабуть теж працював із цим деревом, до створення пластику. :) Дуже красиве поєднання кольорів - бездоганна класично - фундаментальна робота. Вподобайку, та переглядів каналу.
I have a JET 1221 - similar in size to yours. I think it's great fun to turn larger pieces. It just takes a little more finesse with the smaller lathe. Super nice piece! Cheers!
Thank you for your comment 🙇 I'm happy to hear that! This lathe is compatible with works up to a maximum diameter of 30cm, but the VICMARC VL300, which has a maximum turning diameter of 60cm, is rarely available. lol Getting from Japan 🇯🇵
Try using a carbide hole saw, instead of the forstner bit. If you can find the correct size. Plumber of 41 years and I’ve been using hole saws for running PVC drainage pipe, my hands and wrists love me now
I noticed right away that this size of a block might be new to you. Stuff like not automatically cutting the corners down, how you tried to drill it out, etc. No worries, we all gotta learn, but the glove on your front hand freaked me out a little bit. Especially at 2:14 where your tool rest is way too far away from the piece & you wiped the chips off with that gloved hand. I think you were a lot closer to a pretty severe injury than you realized. I've been turning about 13ish years, so I'm speaking from a bit of a background. Gloves are super dangerous, even moreso the type you were wearing & that gap could do some gnarly things to a finger if it got sucked in by, say, a glove. Be safe & keep making awesome stuff!
Ciao Yamabiko, i tuoi filmati sono interessanti perché privi di commenti, i tuoi lavori sono molto interessanti, Ho notato che durante il lavoro hai utilizzato un gancio a scavare, è auto costruito? Buon tutto , un saluto da Roma.
Ciao! Grazie per il tuo commento 🙇 Proveniente dal Giappone 🇯🇵Questo strumento ad uncino mi è stato regalato da un tornitore di legno coreano. Realizza anche i prodotti e da allora li vende. Questo è Lee Gun Moo.
Unobtainium, that blank would cost $$$$$ in the USA. The final piece might sell for what you have into it. the cracks would discourage me on such a high end piece.
Thank you for your comment 🙇 Because of the cracks, this ebony block could be purchased cheaply. And this work will also be sold cheaply lol Getting from Japan 🇯🇵
Always stunning, A joy to watch :)...........p,s the dog is pretty sweet too :)
Thank you for your comment as always 🙇 I'm very happy to hear that!!
Getting from Japan 🇯🇵
My favourite ..... and only wood turning channel :) @@YamabikoWoodArt
あぁぁカッコよくてヤバいですねぇ✨以前も虎柄の木はカッコイイなぁと思いましたが、製作中も完成品もドキドキする程で🥹つまみ部分も繊細な上に重厚感とは…うわぁすみません感動しちゃってます👏
いつもコメントありがとうございます！🙇
数本ですが、数日間過去の動画から再編集してお届けしています💡
この木は黒檀ですが、本当に硬くて中を掘るのには苦労しました😂
摘まみ部分は良いのが出来たと思っています！
そろそろ乾燥したので販売してみようと思います🙇
@@YamabikoWoodArtいつもご丁寧にありがとうございます🙇✨再編集の投稿も嬉しいですよ！すごく素敵な作品だからすぐ買い手がつきそうですね😌うぅ欲しい…
Great contrasting woods! Beautiful work as always!
Thank you for your comment 🙇
I'm happy to hear that!
Getting from Japan 🇯🇵
Wow that is a beautiful piece of wood. You are definitely an artist.
Thank you for your comment 🙇
I'm happy to hear that!
Getting from Japan 🇯🇵
Absolutely stunning,the ebony is so beautiful and the finial you turned is spot on.love the contrast of colours in the wood. Arigatou gozimasu for sharing with us.😘😘
Thank you for your comment as always 🙇
I'm happy to hear that!
Have a great day!
Getting from Japan 🇯🇵
There’s not many pieces I can compare to that. Absolutely stunning. Beautiful work. 👍🏻
Thank you for your comment 🙇
I'm happy to hear that!
Getting from Japan 🇯🇵
Beautiful work. Definitely not an easy piece of wood to work with. I think my father worked with it long ago and recall it being quite difficult to turn, but he was able to manage it.
Thank you for your comment 🙇
Ebony is very hard wood🪵 I found it easier to cut with a carbide tip than with a gouge. It's still hard, so I don't want to use ebony for a while. lol
Getting from Japan 🇯🇵
@@YamabikoWoodArt I don't blame you for that! Still, it turned out to be a beautiful piece :)
Very nice!!! I like the finial work too. Thank you for sharing your wood turning.
Thank you for your comment 🙇
I'm happy to hear that!
Getting from Japan 🇯🇵
Very beautiful piece sir have a great day
Thank you for your comment 🙇
I'm happy to hear that!
Getting from Japan 🇯🇵
absolutely beautiful! Well done!
Thank you for your comment 🙇
I'm happy to hear that! Have a happy day✨
Getting from Japan 🇯🇵
Beautiful! I can see from your video that I would be hard pressed to ever turn a significant piece of ebony on my little harbor freight lathe. lol. Well done, Sir! 🫡
Thank you for your comment 🙇
I'm happy to hear that! This lathe is compatible with works up to a maximum diameter of 30cm, but the VL300, which has a maximum turning diameter of 60cm, is rarely available. lol
Getting from Japan 🇯🇵
@@YamabikoWoodArt I’m in the state of Alabama in the United States. I’ve been a subscriber for a long time and look forward to your videos! Thank you for the content 😎👍🏼
@@joker747A I'm happy to hear that🙇
I have had health problems for a long time. However, now that I'm feeling better, I'd like to start posting little by little. The dog is very energetic🐶
Have a happy day 😊
Getting from Japan 🇯🇵
@@YamabikoWoodArt so glad you are feeling and doing better. Cheers to continued healing! 👍🏼
Ebony is hard, but I love the way it cuts. Great work.
Thank you for your comment 🙇
Since ebony is hard, it seems to work better with carbide tips than gouges. But I don't want to make any more ebony pots. lol
Getting from Japan 🇯🇵
The finial is awesome and the whole project is beautiful.
Thank you for your comment 🙇
I'm happy to hear that!
Getting from Japan 🇯🇵
Nice video.
The can/vase looks great! 👍
I once turned a box, also with a lid and a similar tip.
Only I turned a loose ring into this tip, which can be moved but not removed.
Thank you for your comment 🙇
I'm happy to hear that!
Getting from Japan 🇯🇵
You've created a work of art. Simply stunning in every way.
Thank you for your comment 🙇
Getting from Japan 🇯🇵
Той, хто назвав відомий усім пластик ебонітом, мабуть теж працював із цим деревом, до створення пластику. :)
Дуже красиве поєднання кольорів - бездоганна класично - фундаментальна робота.
Вподобайку, та переглядів каналу.
Дякуємо за ваш коментар 🙇
Приїзд з Японії🇯🇵
I have a JET 1221 - similar in size to yours. I think it's great fun to turn larger pieces. It just takes a little more finesse with the smaller lathe. Super nice piece! Cheers!
Thank you for your comment 🙇
I'm happy to hear that!
This lathe is compatible with works up to a maximum diameter of 30cm, but the VICMARC VL300, which has a maximum turning diameter of 60cm, is rarely available. lol
Getting from Japan 🇯🇵
Wow!!! Crazy beautiful!!! Love it!!!
Thank you for your comment 🙇
Getting from Japan 🇯🇵
muito linda obra de arte
Thank you for your comment 🙇
Getting from Japan 🇯🇵
This is really beautiful... 👍
Thank you for your comment 🙇
I'm happy to hear that! Have a happy day✨
Getting from Japan 🇯🇵
Beautiful work, great looking lumber! Love the dog.
Thank you for your comment 🙇
Getting from Japan 🇯🇵
Great looking piece.
Thank you for your comment 🙇
Getting from Japan 🇯🇵
Yamabiko, that is one gorgeous lidded vessel.
Thank you for your comment as always 🙇
Getting from Japan 🇯🇵
It looks like an urn, it’s beautiful.
Thank you for your comment 🙇
I'm happy to hear that! Have a happy day✨
Getting from Japan 🇯🇵
Beautiful 😊
Thank you for your comment 🙇
I'm happy to hear that! Have a happy day✨
Getting from Japan 🇯🇵
Beautiful piece of wood from the beginning. 😮
Thank you for your comment 🙇
Getting from Japan 🇯🇵
Amazing piece. You did great on that finial.
Thank you for your comment 🙇
I'm happy to hear that!
Getting from Japan 🇯🇵
Прекрасная работа
Дякуємо за ваш коментар, як завжди 🙇
Я радий це чути! Щасливого дня✨
Приїзд з Японії🇯🇵
Very impressed keep up the creativity
Thank you for your comment 🙇
I'm happy to hear that!
Getting from Japan 🇯🇵
Nothing but magnificent! 👏🏻👏🏻👌🏻
Thank you for your comment 🙇
I'm happy to hear that! Have a happy day✨
Getting from Japan 🇯🇵
Try using a carbide hole saw, instead of the forstner bit. If you can find the correct size. Plumber of 41 years and I’ve been using hole saws for running PVC drainage pipe, my hands and wrists love me now
Thank you for your comment 🙇
I'm happy to hear that! Have a happy day✨
Getting from Japan 🇯🇵
I noticed right away that this size of a block might be new to you. Stuff like not automatically cutting the corners down, how you tried to drill it out, etc. No worries, we all gotta learn, but the glove on your front hand freaked me out a little bit. Especially at 2:14 where your tool rest is way too far away from the piece & you wiped the chips off with that gloved hand. I think you were a lot closer to a pretty severe injury than you realized. I've been turning about 13ish years, so I'm speaking from a bit of a background. Gloves are super dangerous, even moreso the type you were wearing & that gap could do some gnarly things to a finger if it got sucked in by, say, a glove. Be safe & keep making awesome stuff!
Precious presice piece of art educational mitivating inspirational and beautuful libg lasting wood souverir congrats
Thank you for your comment 🙇
I'm happy to hear that!
Getting from Japan 🇯🇵
Looks fantastic. Nice job.
Thank you for your comment 🙇
Getting from Japan 🇯🇵
Gostei muito do seu vídeo parabéns já deixei o meu like Maroto 👍 👍 👍 🇧🇷🇧🇷🇧🇷👊🤜🤛💯💯💯
Obrigado pelo seu comentário 🙇
Eu estou feliz em ouvir isso!
Chegando do Japão 🇯🇵
Stunning
Thank you for your comment 🙇
I'm happy to hear that!
Getting from Japan 🇯🇵
Ciao Yamabiko, i tuoi filmati sono interessanti perché privi di commenti, i tuoi lavori sono molto interessanti, Ho notato che durante il lavoro hai utilizzato un gancio a scavare, è auto costruito? Buon tutto , un saluto da Roma.
Ciao! Grazie per il tuo commento 🙇
Proveniente dal Giappone 🇯🇵Questo strumento ad uncino mi è stato regalato da un tornitore di legno coreano. Realizza anche i prodotti e da allora li vende. Questo è Lee Gun Moo.
Beautiful.
Thank you for your comment 🙇
Getting from Japan 🇯🇵
Unobtainium, that blank would cost $$$$$ in the USA. The final piece might sell for what you have into it. the cracks would discourage me on such a high end piece.
Thank you for your comment 🙇
Because of the cracks, this ebony block could be purchased cheaply. And this work will also be sold cheaply lol
Getting from Japan 🇯🇵
Béla finalização, ficou espetacular.
Thank you for your comment 🙇
Getting from Japan 🇯🇵
お疲れ様です(ΦωΦ)ゞ
年輪があることから材木を削っていくと
模様や柄になるのが理解できます
ただ今回。色が、色だけに
チョコレートの塊に見えてしまって
削っていく途中
チョコレートうまそう。とか
思ってしまいまして
動画に集中できんかったです🤣🤣🤣
コメントありがとうございます🙇
チョコレートに見えるとは思いませんでしたが、見直すと確かにチョコレートでした😂😂
バレンタインデーに投稿した方が良かったかもしれません笑
What chisels did you use ? Bowl? Or Bowl & Spindle? Thank You!
Thank you for your comment 🙇
I use Bowl & Spindle gouge! However, hard materials are frequently sharpened.
Getting from Japan 🇯🇵
Hermoso
What do you use to shine it?
Thank you for your comment 🙇 Ebony is so hard that it shines just by polishing it. Please try it.
Getting from Japan 🇯🇵
nice
Thank you for your comment as always 🙇
Getting from Japan 🇯🇵
👏🏻👏🏻👏🏻👏🏻👏🏻
Thank you for your comment as always 🙇
Getting from Japan 🇯🇵
この美しい花瓶に親指を立てていただければ幸いです。 FAXして頂ければ鉄火巻き寿司3本。米国オクラホマ州からのご挨拶
コメントありがとうございます！🙇
嬉しいです。日本からのご挨拶🇯🇵
helllooooo
Thank you for your comment 🙇
Getting from Japan 🇯🇵
You could put your weed in there.
Thank you for your comment 🙇
Getting from Japan 🇯🇵
Thinner and thinner and thinner
Thank you for your comment as always 🙇
I'm happy to hear that! Have a happy day✨
Getting from Japan 🇯🇵