Thank you very much bro....i am about to go for my exam but was stuck with calculating the easting and northing for the other points. Your video has helped me a lot. Thank u very much bro. May God bless you. Keep doing more videos. Peace!
Dear sir bearing of point 1_2 is 306 its mean it taken in zone 4th where north positive and east negative Then i think easting must be came in negtive???
@@LearnExplore Sir I am really desperate to find out the coordinates of the technical description of a lot. I need to identify the coordinates of each point and the only data that I have is the technical description and its bearings with its distances. The point 1 does not have a coordinates, what should I do?
Hi, the data I have is a starting point in DMS format, then bearings and distance in this format. Bearing: S 72° 32’ E, Distance: 7.30m. How do I proceed so I can plug it in Google Maps/Earth? TIA!
@@LearnExplore I converted that bearing using the formula deg+(min/60)+(sec/3600) and arrived at 72.5333. Is this the correct whole circle bearing value?
No its not. Since your bearing is in SE quardrant that means it is in 2nd quadrant if we split in 4 quardrants in clockwise manner. Whole Circle bearing is calculated clockwise from North. So in your case wcb will be (180-72.533)
Hello, very good video, much appreciated. Can you help me out as I am trying to locate some position but my bearings are not in decimal. They are in this format N.16 - 37E Can you give any advice how I convert to decimal please??
@@LearnExplore I cannot match that problem to my problem. Are you able to tell me what N.16 - 37E is in decimal format. I have searched high and low and I cannot work this out at all. Any help would be appreciated
@@davidjobes2413 This is actually quadrantal bearing system. Here is few examples Example 1: N 16-37E means 16°37'00" and if you want to convert this degree minute second to decimal then watch this video ruclips.net/video/-BOj-hJynBc/видео.html Example 2: N 15-30W means 344°30'00" i.e. (360-15.5) Example 3: S 15-30E means 164°30'00" i.e. (180-15.5) Example 4: S 15-30W means 195°30'00" i.e. (180+15.5) Hope this examples will help you.
I want to generate the coordinates for a given distance with respect to the perpendicular centerline of the track, which is already aligned as per coordinate, is it possible??? as i have the coordinates for the track center of each location.!!
sir, I have center (lat, long) and raduis in KM/ Mile, I want to find all coordinates of rectangle permiter around that center point upto to a radius ( thats I know)... How its possible
pls make many samples video auto lvl bearing to convert coordinate bcoz when we r make a village map in that more galli is same bearing but its cordinate isnt same eg.take a squre parlel 2 side line same but coordinate ?pls
What a helpful video I like it very much. Can I create my own excel spreadsheet by following what you showed in your video? Or I have to download it from your link?
Hello filipino watching from riyadh. I bought a parcel of land in the Philippines. I have bearing in lot title. Can you help me convert it to coordinates so i can reflect it on google map's. Is that possible. Thank you
Hi from a known GPS coordinate I want to move X amount of feet in a fixed direction, how can I calculate the gps coordinates of the destination, please?
Brother thank you soo much for Thai video, I want to export the points marked in CAD, and I want to move a robot arms to that exact point... How I can calculate..?
@@LearnExplore It is Delta make SCARA robot. I have exported points coordinate from CAD into a excel. After if I use that point coordinate to move robot, then there offset around 30mm
@@LearnExplore if take length of selected point from origin point, and calculate it by L*sin@, and L*cos@, is it good idea...? Then can I get accurate point. Here the value of origin point is my robot's origin.
Great..can you please guide on Lamert datum transformation...I am facing this problem...will be great help.. Or any formula in excel.. Points or toposheet is on Lambert, indian zone1 wgs 84 N41.. Thanks
Great..can you please guide on Lamert datum transformation...I am facing this problem...will be great help.. Or any formula in excel.. Points or toposheet is on Lambert, indian zone1 wgs 84 N41.. Thanks
@@LearnExplore i only have the lot title . In the lot title there a bearing and distance. How i get the exact location using google maps or google earth. Please help me.
@@LearnExplore there no lat long. Options 😥 i need to convert the bearing and distance to easting and northing? Sample input (N 40°23'E ) google will locate the lot?
THANK YOU SO MUCH SIR ...HELPED ME IN SURVEY PRACTICAL 🙏🙏🙏LOVE FROM NEPAL 🙏🙏
You are welcome. Thanks for this feedback. Love from India🙂
Wow. Brilliant and very helpful. Thank you.
Thank you brother, its very clear tips
Thank you very much for your valuable information with nice video it's very important information for me. I learned from your video.
Thanks for this nice feedback
This is wonderful! Simple yet so easy to understand 👍👍👍👍👍
Thank you so much
Thank you verry much for this exemple it helped me a lot.I did subscribed.
How can I get the coordinates of first point.. Of easting and northing
Thank you very much bro....i am about to go for my exam but was stuck with calculating the easting and northing for the other points. Your video has helped me a lot. Thank u very much bro. May God bless you. Keep doing more videos. Peace!
You are welcome 😊
Thank You for your valuable feedback 😊
Dear sir bearing of point 1_2 is 306 its mean it taken in zone 4th where north positive and east negative
Then i think easting must be came in negtive???
Please thank you very much
Nice work.
Please where did you get the non coordinate.
hey! I just wanted to know, how did you convert your bearing to decimal? Thanks!
We have seperate video for that. Look for the video on our channel.
@@LearnExplore Sir I am really desperate to find out the coordinates of the technical description of a lot. I need to identify the coordinates of each point and the only data that I have is the technical description and its bearings with its distances. The point 1 does not have a coordinates, what should I do?
This video was prefect thank you so much sir please give me excel file...
Its my pleasure
That extra tips at the end is wonderful. Thank you! 😉
thank you very helpful...
Glad to hear that
Thanks I'm a student surveyor
Hello, I would like how to calculate XY coordinates while i have distance and Angles only?
Can I also use this excel if I want to convert the coordinates to distance and bearing?
We have different video for that. Pl check
Thank you so much
You're most welcome
What should I do if I only have the coordinates in Geographic Coordinate System?
First conver it to UTM
by the help of QGIS.
or if u want to convert a single coordinate then visit latlong.net and convert it. Simply search on Google
Thanks bro...very helpful
where 2923151.9610 in easting 1103222.9080 in northing from ? explain pls
The coordinate system of this data is "Kalyianpur Zone IIB"
This video was perfect! Thanks so much.
Thank You for your valuable feedback 😊
Good
Very helpful
Thank you! God Bless!
Hi, the data I have is a starting point in DMS format, then bearings and distance in this format. Bearing: S 72° 32’ E, Distance: 7.30m. How do I proceed so I can plug it in Google Maps/Earth? TIA!
Sir First you have to convert Quardantral bearing to whole circle bearing. Then apply our formula
@@LearnExplore I converted that bearing using the formula deg+(min/60)+(sec/3600) and arrived at 72.5333. Is this the correct whole circle bearing value?
No its not. Since your bearing is in SE quardrant that means it is in 2nd quadrant if we split in 4 quardrants in clockwise manner.
Whole Circle bearing is calculated clockwise from North.
So in your case wcb will be (180-72.533)
You can watch this for concept
ruclips.net/video/xu8ROw8bK_Q/видео.html
Fantastic! Thank you!
Welcome
Hello,
very good video, much appreciated. Can you help me out as I am trying to locate some position but my bearings are not in decimal. They are in this format
N.16 - 37E
Can you give any advice how I convert to decimal please??
Thank you
For this video already uploaded. pls check in our youtube channel
@@LearnExplore Do you have a link to that video please? How to convert from N.16 - 37E to decimal format
ruclips.net/video/-BOj-hJynBc/видео.html this video is si,ilar to your query
@@LearnExplore I cannot match that problem to my problem. Are you able to tell me what N.16 - 37E is in decimal format. I have searched high and low and I cannot work this out at all. Any help would be appreciated
@@davidjobes2413 This is actually quadrantal bearing system. Here is few examples
Example 1: N 16-37E means 16°37'00" and if you want to convert this degree minute second to decimal then watch this video ruclips.net/video/-BOj-hJynBc/видео.html
Example 2: N 15-30W means 344°30'00" i.e. (360-15.5)
Example 3: S 15-30E means 164°30'00" i.e. (180-15.5)
Example 4: S 15-30W means 195°30'00" i.e. (180+15.5)
Hope this examples will help you.
I want to generate the coordinates for a given distance with respect to the perpendicular centerline of the track, which is already aligned as per coordinate, is it possible??? as i have the coordinates for the track center of each location.!!
Yes it is possible. Needs complex excel formulas
sir, I have center (lat, long) and raduis in KM/ Mile, I want to find all coordinates of rectangle permiter around that center point upto to a radius ( thats I know)... How its possible
Convert lat long to UTM
then ad and subtract the radius from easting & northing to get all four coordinates
What if the Eastings and Northings of the first Station is not given?
pls make many samples video auto lvl bearing to convert coordinate bcoz when we r make a village map in that more galli is same bearing but its cordinate isnt same eg.take a squre parlel 2 side line same but coordinate ?pls
Thanks for reminded... I almost forgot
where did you get the easting and northing.. the first one
I had taken in with DGPS
What a helpful video I like it very much. Can I create my own excel spreadsheet by following what you showed in your video? Or I have to download it from your link?
Thanks.
I recommend you to make one. Then ofcourse you will learn a lot. Good luck. Any help am here
Sir where did get the the known coordinates?example if you plot the technical description of a land title.
tie line from reference point , BLLM1
How thanks for the tutorial
How to you convert true coordinates to local coordinates in excel.thanks.
True coordinate means?
Very very nice sir thnx
Thank you for this!
Hi, want to ask is it the Northing represent x-axis and Easting represent y-axis?
No, X means Easting
and Y means Northing
Hii, How can I eextract conordinates for point A to point B? for say the coordinates of the width of a road
Use Same distance and bearing method
Hello filipino watching from riyadh. I bought a parcel of land in the Philippines. I have bearing in lot title. Can you help me convert it to coordinates so i can reflect it on google map's. Is that possible. Thank you
Hi
Can you Help ME I wala confuse How and where did you get The northing and easting of 1
I Can Not start project
Tia
Hi
To start a project you have to carry readings from a nearby permanent bench mark i.e. BM and establish a TBM i.e. Temporary bench mark
Im still confuse where did you get The northing, easthing of 1???
I already had it on site
CAn you Help ME
Pls.. educate mu tia
This was very helpful
+tomas Fernandez Cuervo
Thank u and pls SUBSCRIBE us
Hi from a known GPS coordinate I want to move X amount of feet in a fixed direction, how can I calculate the gps coordinates of the destination, please?
Yes ofcourse u can. The same formula as I shown will be used while calculating new corrdinate from dist and bearing
@@LearnExplore No it's not. If you use this formulas, the more distance you have, the more error you got. Earth surface isn't plane.
How did you get the starting coordinates? Normally they are shown like -33° 00' 00'' 151° 19' 18''.
The coordinate format u given is in lat,long format
But you have to convert the same to utm coordinate
Thanks so much bro.and can u help us on videos for microsurvey land survey to learn more
great work
How did you generate the know eastern and Northern
It's just example
Brother thank you soo much for Thai video, I want to export the points marked in CAD, and I want to move a robot arms to that exact point... How I can calculate..?
Thanks...what is robot arms?
For exporting coordinate we have separate video.
@@LearnExplore It is Delta make SCARA robot. I have exported points coordinate from CAD into a excel. After if I use that point coordinate to move robot, then there offset around 30mm
@@LearnExplore if take length of selected point from origin point, and calculate it by L*sin@, and L*cos@, is it good idea...? Then can I get accurate point. Here the value of origin point is my robot's origin.
Great..can you please guide on Lamert datum transformation...I am facing this problem...will be great help..
Or any formula in excel..
Points or toposheet is on Lambert, indian zone1 wgs 84 N41..
Thanks
Use QGIS
Thank you my bro
Great..can you please guide on Lamert datum transformation...I am facing this problem...will be great help..
Or any formula in excel..
Points or toposheet is on Lambert, indian zone1 wgs 84 N41..
Thanks
Bro do you have any sofware..like geocal of blue marble..
hi im new to this. where did you get the initial eating and northing coordinates values?
I have taken from site by Dgps
i dont understand the radiants. What is the formula to convert bearing to radiant?
Radian is in pie format. Please use Google search
@@LearnExplore when I googled it. It showed pie/180 but when I times it with tht, the answer is wrong. Can u tell the exact formula please?
A circle has 360 degrees or 2pi radians - going all the way around is 2 * pi * r / r. So a radian is about 360 /(2 * pi) or 57.3 degrees.
@@LearnExplore thanks a lot. I'll try using it.
Very nice
How i adjust the TRAVERSE which i do with triangle method..
Please reply.
Thanq for this
You are welcome
Wow! Love thisss
good work bro
+M Arfan Mukhtar
Thank you
welcome bro
Can you please tell me. What the digits express after decimal
Digits after decimal provide more accuracy
What format of coordinates have you used?
Kaliyanpur Zone IIB
Please make a video on open travers calculation using ts travers function data and atteched excel sheet under the video description link
Ok i will upload
Learn & Explore thank you dada...
How can I use Units as my measurements?
what if i i dont have a given bearing?
Then u have invalid data. A line without bearing is invalid
Please help it says I should specify start poiny
Copy the excel data and paste it in autocad
good work dear
Thank you
How you get the first coordinates ?
By DGPS or any gps
@@LearnExplore i only have the lot title . In the lot title there a bearing and distance. How i get the exact location using google maps or google earth. Please help me.
Open google map and find lat long. Then convert lat long to utm coordinate system through google search
@@LearnExplore there no lat long. Options 😥 i need to convert the bearing and distance to easting and northing? Sample input (N 40°23'E ) google will locate the lot?
Can u Find your location in google map
You have converted the bearings froms DMS into RADIANS. kindly guide me
How to do for curve location?
Helpful
Glad to hear that
How this Easting 2923151.9610 comes??
Good night sir muje re wall ke coordinate ke nikate hai
why bearing was in decimal sir?
Convet degree min sec to decimal. Bcz for mathematical cal decimal req.
How did you get the known point of Easting and Northing
Easting 29323151.9610
Northing 1103222.9080..?
Pls reply.. Thanks
I collected it from field
@@LearnExplore is this the resection??? Or the position of the total Station??? The easthiing and Northing...?
good work
Hello i need this format of excel sheet formula
Prepare it by yourself. Because u could learn by own. 🙂
how to calculate partial coordinate
GOOD JOB
Hi Sir, horizontal drilling directional drawing ka video banaye na. Plz.
Will try
formula for closing the line?
Alreday Video uploaded in this regard
Thanx for u
How to get the easting and northing
of point 1? please answer need asap im 13 years old btw
Dear you need to obtain it from field by using GPS or DGPS
@@LearnExplore Okay Tysm! :D
@@LearnExplore Do you have email? I wanna ask something
where is the download links
Check pinned comment
Sukriya
What is the permissible error?
+debika Sarkar
Ei excel sheet er jonne bolchen??
It will not work for GPS coordinates because Earth surface isn't plane. It has round shape ;)
good
Thanks
nice
🤗
I need this sheet
COOL
Plz help for downloading
Link is already given pls check
Download nhi ho RHA he sir plz send link my I'd. mannpal2016@gmail.com
Ok you will receive over mail
Learn & Explore thanks sir
Yep
how to do in minecraft
I'm having trouble understanding your words through your accent, unfortunately. I appreciate the effort, though.
I'm sorry for that. Try using subtitle
dans le graphe c faux
Soumen da tomar phone no ta debe
Tor no ta de..i will call
plz i need
What the hell is up with all these DURKAHS !!!!???? I can’t understand a damn thing!!!! 😡
What u want to say actually??
Sir please hindi me