@@JonathanJScottFilms Actually i'm using it with the D5600, and there are quite a number of features that does not work, such as electronic follow focus. you have to use the followfocus motor.
if you don't have a gimbal anymore you can't help me, but my question is simple, my gimbal has 1mm clearance on the lower engine, so it swings from side to side, I wanted to know if it's the same with the others?
I do have problems with getting any camera working with using the wheel for zoom or followfocus (hence i bought the follow focus motor) - I tried both nikon D5600 and Sony (ZVE10). It feels like software support from Manfrotto is somewhat lacking (according to the website it does not support recent cameras like the A7IV or A7C with zoom, - anybody who got zoom working from the gimbal on sony cameras? (it might just be me?)
Can I mount a Mobile in this Mandrotto 220 Gimbal as well?? I mean is it a 2 in 1 Gimbal or is it only a Dslr Gimbal??
Check out the MVG 220 on Amazon: amzn.to/3pgaSeI
Does it go well with my nikon d5600? Searching for a new Gimbal🙈
Should take that camera fine but it does depend on what lens you are using.
@@JonathanJScottFilms Actually i'm using it with the D5600, and there are quite a number of features that does not work, such as electronic follow focus. you have to use the followfocus motor.
Great review thanks 👍
Thanks
Buongiorno jonatan per favore come si blocca il pan tilt roll grazie mille
3:43 so you forgot about your FeiyuTech AK4500 Review? The Big Brother with the same software/firmware as this one and the MVG 460. :-)
When I had the ak4500 it didn't display the bars showing how fast the gimbal was moving, they must have added this in a more recent firmware.
is that the engine with the red stripe swinging? I have a lot of will on that engine so I wonder if others have it too? Thank you
Sorry I'm afraid I don't really understand what you are asking. All I can say is that all three motors work fine on the unit that I had.
if you don't have a gimbal anymore you can't help me, but my question is simple, my gimbal has 1mm clearance on the lower engine, so it swings from side to side, I wanted to know if it's the same with the others?
nope - mine doesn't have that. Sounds like a production defect.
Hi, can I ask if your lower motor with the red stripe just above the handle also has a clearance of 1mm?
health Mirek Czech Republic
Sorry I don't quite understand what you mean?
I do have problems with getting any camera working with using the wheel for zoom or followfocus (hence i bought the follow focus motor) - I tried both nikon D5600 and Sony (ZVE10). It feels like software support from Manfrotto is somewhat lacking (according to the website it does not support recent cameras like the A7IV or A7C with zoom, - anybody who got zoom working from the gimbal on sony cameras? (it might just be me?)