@@Miyconst X99? Ha-ha, farewell my X79 setups since 2019 (first edit. - E5 2640+Kllisre X79M3+16Gb DDR3 2133 MHz+RX570 4 Gb, later it grown to E5 2689+Machinist V2.82+32Gb DDR3 2133 MHz+RX5700XT). Those were pretty capable somehow, especially with such a price. Few weeks ago I've shifted to AM4 (R5 5500+Jginyue B550I+16Gb DDR4 3600MHz+RX5700XT) - difference is big, I love my new setup. Thanks for review and hints for this ITX board, you helped me in my quest for a new mini board so much, Miyconst.
@@Miyconst correct, around the world alot of gamers can still use intel 775 and be very happy.... tech is growing but more than 50% of our world to game can use your vids and 580, b580 to game as they want
@@Kevin-vh6nn 771 to 775 modded xeons and oc to 4.2ghz are still VERY usable for general tasks and lightweight gaming. Just slap a modded W10 ISO and you're all set. RX 580 should be good enough.
It's impressive that a nearly 10 year old platform is still this relevant. There are lots of useful tasks for these machines. I'm still using two x79 Xeon v2s for basic 3D design and programming tasks. They work perfectly fine.
Just got a xeon e5 2697a V4 paired with a HP Z440 and RTX 2060 super. An upgrade from xeon 1225 v2 lol. R 5600 build in my country was expensive so xeon ftw
I'm playing all the actual games with a E5-2690 V3 3.7GHz 12/12 (Unlock, undervolt, FSB OC), 32GB 2133 quad-channel 12-13-13-27, all the games running at 4K 60FPS Mid/High (FSR balanced) on a 6700 XT, in resume, my GPU is bottlenecking the E5-2690 V3 at 4K 60FPS native, want a upgrade to a 4070 Ti so soon...
Very similar situation here, E5-2697 V3, more RAM than I know what to do with at 2666 and low CL, RTX 2080Ti, and my GPU is the bottleneck not the CPU, playing at 4K60.
@@samwalker7567 Thank you for helping me prove these CPU's can handle this high resolution. I am using the 2697 v4 with a 3060, and I tested with a 3080 from another pc just the other day. Both GPU's were the bottleneck with a monitor of 1440p 180hz.
Great work and for taking the time to do a deep dive into the V4 CPU. It's hard to argue against the performance of the Ryzen, especially given that it's so close in price to the old Xeon platform. I think the few remaining things the X99 has going for it is support for massive amounts of quad channel memory and a ton of PCIe connectivity (even though it's only Gen 3). For me personally, I've been considering getting an X99 platform with either a 2690 v4 or 2698 v4 for home lab purposes since it's by far the cheapest option even compared to older Threadrippers. Looking forward to seeing productivity benchmarks since that'll be my primary / only use case 🙌
Long live X99. Ive enjoyed your content and because of your tutorial for turbo unlocking ive been able to help my friends who were on tight budgets(300-400€) to get great value builds. (300€ builds 2697V3, X99-D4 plus, cheap DDR4 ECC 32gbx2, 1tb nvme, GTX 1080, 750w psu, pcie wifi, small case with towercooler) (200€ 2640V4, 2x8gb ddr4, X99-P4, RX570 4gb, 500gb nvme, 500w psu) (410€ E5-2697V3, 4x8gb ddr4, X99-D4 plus, 1tb nvme, RTX3060Ti mini, 750w psu, wifi pcie, towercooler, small case). *SO FAR NO ISSUES OR DEAD BOARDS* Personally still runing the E5-2697V3 12c/24t active and manual OC to 3.7 all core with RTX3070Ti(my board is the X99 rampage V extreme with LN2 bios on) Personally the boards woth issues ive had vere just the X99-RS9(Very hot VRM when even idle with 2666V3) and X99-D4 (bios not turbo unlockable) Ive used x99-P4 with 2660V3 turbo unlocked with out issue X99-D4 PLUS woth 2697V3's also turbo unlocked with out isssue(besides cpu being limited to 3.4ghz woth 14c active and 3.6ghz with 10c active) *long term testing* build my classmate a pc with E5-2690V3(turbo unlovked 3.5ghz) 4x8gb dual rank ddr4(3600mhz sticks runing at 2133 cl11) Jingsha X99-D8 and for the GPU Rx6800 16gb. That system after 2(soon 3 years) still going strong with out issue.
nice video bro, here in brazil the e5 2697av4 is more affordable, because has less taxes or something like that, now i have more information about how that cpu will perform, so thanks for that compare, is a little difficult find information about this cpu on internet :)
great video, as someone still on an old E5-2680 V4 I think a more realistic paring for this kind of cpu is more like an RTX 3060 or Radeon rx 6600xt, meaning a budget system and would be fun to see that in the same testing and see how much the cpu impacts a lower tier graphics card
I have this exact CPU paired with a RTX 3060 as you mentioned. The 3060 is great and will play any game I need at high settings, at 1440p ( Monitor is 180hz). However, it is a bottleneck for the CPU. Still looking to upgrade GPU eventually.
@@peterhallbus1114 Interesting. I planned to get the 2699 v4 and a new GPU, then grab a second x99 mobo and upgrade my GF's system. Either that or a 6950X but the prices on that chip are a little high. So If I ever run into any bottlenecks Ill upgrade.
@@Morrow420 the 3060 ti is like 30% performance over the regular 3060 so depending on what upgrade you go for that might be fine, I also game at 1440p. the 2699 v4 is a nice upgrade as long as you play games that really support multicore cpu's, many still like higher clocks over cores at six to eight cores. I personally think my next upgrade will be a consumer chip, but that might be a few years away since I'm currently content with what I got
Thank you for doing this still. I always like entry xeon content, even when it's negative. I have built a few rigs with the utter lowest cost options i could get there on ali and off locals, and i am always surprised with the capabilities of even some of the trashiest x99 parts. I would love to see 2640v4 content, that one at an easily accessible $4 each seems too good to be true.. its a shame my $21 white qiyada x99 boards are nowhere near as exceptional😂. A few months ago i couldnt imagine building such usable machines for around 150 usd
I have an office PC that I lug around with between temp IT jobs. I use it as my main rig for everything. It has all ewaste parts. 1660 v3, x99 ws asus 3 way titan xp. It can play games all the way up to 8k with no issues at all! X99 is immortal!
Hi i bought mechanist x99 mr9a pro max motherboard and 2666 v3. I need a other BIOS to turbo unlocked , ant to enable resizable bar. Or that model has already proper bios ?
Hi, I have an e5 2680 v4 with a Qiyida brand motherboard (the one with a fan on the DRM) but my processor is limited to a TDP of around 20 W, so I lose performance. Do you know what I should do?
The 4x8gb vs 2x16gb differences with E5 2697A config is super interesting to me. So with 4x8gb on such platform you are getting quad channel operation with single rank per channel configuration, where's with 2x16gb you get dual channel operation with dual rank configuration, which surprisingly wrecks the quad channel, single rank configuration, huh interesting
@@Miyconst Well yeah, when you look at total average, but there are games where dual rank setup completely demolishes single rank setup, like in battlefield 4 and fortnite case. Its very surprising since i totally thought that the quad channel bandwidth would give a significant advantage in games, but it seems its not the case in vast majority of games. Thanks for benches :)
I have a question about the bios for Huananzhi X99 TF with c612 chipset. will the bios that is theoretically in the tab for this motherboard from wavypalasbabys -50/-50 rebar work with it? installation via ftp? anyone tested the bios on this motherboard?
@@eleonormota919 Todavía uso el viejo Haswell para mi computadora personal, con un procesador E3-1231 v3. Pero pasé de la plataforma X99 a la AM4 para las PC que vendo.
xeon 2697 v3 is the best? How much can OC it? What u think xeon vs erying 11980hk ES or QJ01 mobile lga to z270 gigabyte motherboard? I see these mobile mod can be OC and perform like a 13600kf,idk if will be my case in z270 ud3 xp sli model. Am interesting in upgrade ram too.. are cheap now ddr5 32gb? I dont see erying with x16 pcie express for mine 3090 card.
@Miyconst thanks a lot I was curious about that since I have a huananzhi p4 and I wanted to swap it since it doesn't have any possibility to put a tmp2.0 and I needed to update to win 11
Undoubtedly. The only problem is the price. 😀 Also, it's not about "extra cores" it's about the overall performance of a CPU. Ryzen 7600 is still a 6-core CPU but it performs better than 5800X.
Great video as always. But what about produtivity? Do you think the xeon e5 is still relevant in that functionality? A assembled a dual 2697v4 for video editing and a second one for geoprocessing and a think the cost benefit is hard to beat.
If you have a task that scales well across many cores and requires lots of RAM, it's next to impossible to find something more cost effective than LGA 2011-3.
I don't have any experience with video editing, by the way. I just felt an unreal difference compare to the 7th gen i5 my friend had. But... Do you think for premiere use and video compiling it was a god choice ? If not, what do you suggest?
I think that dual socket systems are bad for most of the users but if it works for you and you are happy, I see no reason to go into the "what if" territory. Adobe Premiere is known to favor CPUs with strong single core performance but compared to 7th gen i5, basically anything is strong.
@Miyconst Yes i know! I mean about the relative performance. It would be cool to see how the A750/A770 and especially the B580 that is out now would benefit (or not) from switching from X99 to Ryzen.
I see no reason why it shouldn't be compatible. For the best performance you would have to enable Resizable Bar and that's possible with most of the Chinese X99 motherboards, many latest options even have it as a BIOS menu option.
Hello, already asked in another video and you said 2697v4 but, I wanted to metion full prices. 2698v3 35$ 2697v3 35$ 2697v4 48$ Which one do you prefer? (2698v3 is brand new, not used)
I have a shoebox full of old random HP Z840 v3 and v4 CPU’s and ddr4 recc server ram. If I wanted to make some PC’s out of it, what’s the best AliExpress single socket X99 motherboard to get? I’m ok with paying a few extra bucks for a better MoBo. Seems like Machinist and Huananzhi are pretty popular, but the tons of model numbers and versions are kind of confusing lol Do any of them have resizable bar support out of the box? I have a few Intel ARC gpu’s I could put in them
All those x99 motherboards support upto 3200mhz but xeon e5 2697a v4 and other cpus only supports upto 2400mhz, adding 3200mhz rams will make system unstable?
The comparison between dual channel and quad channel is really interesting. The most interesting result is my primary use case Fortnite with regard to the 1% lows. A 60% decrease in lows in quad channel relative to dual channel.
Yep.. this is a very weird result but I got it consistently. Please beware that I tested Fortnite with a game replay and live gaming might be different. Also, Fortnite constantly gets updates that also affect performance. So, I would say that both configurations are about the same.
@@Miyconst I will have to test it out. When you record game play do you use an App or a capture card? Which capture card do you recommend if you are using a capture card.
Hello, I successfully unlocked the turbo on my Aigo X99 motherboard using your guide. I used 90-50-50 and observed significant improvements in benchmark tests with the 2698v3. I'm getting 19K overall and 2100 single-core scores (PassMark). My question is: what potential issues could I encounter with the 90-50-50 setting? So far, I haven't experienced any stability problems. And the speed is not always 3.6GHz. However, it's always fixed at 3.6GHz during gaming. Is this normal? Thank you! Glad you’re here!
If your system is stable - just enjoy the extra performance while it stays so. The risks are cooked VRM due to the extra load and the CPU may just degrade over time and won't tolerate such voltage reduction. Constant 3.6 GHz during gaming is awesome, so just enjoy it.
What about Asus Strix X99 Gaming motherboard? Found a good condition used one which is same price as chinese ones in my country. Can I mod it's bios to get turbo all on cores?
almost pulling the trigger to buy used Ryzen 7 5700X + B550 board, and this videos comes out. I guess I gonna put the money to get E5-2680v4 and RTX 3080Ti instead. My setup require lot of PCIe lanes and "upgrading" to AM4 is already questionable move anyway. Already invested on 4x32GB of DDR4 RDIMMs is also not helping to upgrade onto AM4.
Having PCs with 2680 v4 and 2660 v3 (with unlock), I would recommend you to add high-tier v3 CPU to 3080ti. 2680v4 worked well with Radeon 5700, but with 3080ti will definitely become a bottleneck.
@blackbirdest thank you for your suggestion! I pick 3080Ti mainly not for gaming, but more as poor man AI workstation. Had 3060 12GB before, and I think 12GB of ram is sufficient, and I need faster card. I currently have 2650v3 (with tb unlock) and 2650v4
Great video, thank you! So, as the resolution increases, will the gap between Xeon and the Ryzen 5 5600 close? For example, will the CPU bottleneck gradually decrease at 2K and 4K resolutions?
Hey miyconst I have an x99 motherboard with a b85 chipset and I was wondering if it was possible to overclock my cpu with this motherboard. I am aware that b85 does not support overclocking but would it be possible to overlock on b85 if I modify the bios or install another custom bios to allow overclocking
4:55 цікаво, що у деяких випадках 2 канали пам'яті на Зіоні працювали швидше за 4 канали. Я би сказав, у більшості випадків. Як так? Ігри на стільки не заточені на 4-канальну пам'ять?
Я зачіпив цей феномен наприкінці відео, якщо коротко то яне експерт з контролерів пам'яті але наскільки мені відомо, якщо планка має два ранги то процесор одночасно може виконати дві операції. Мої 16ГБ модулі дворангові, 8ГБ однорангові.
Hello again! I bought an AIGO X99M D4 motherboards and 2698v3 CPU. I wonder, is there chance if I send you to default bios and you mode it to unlock all cores for turbo? Thanks!
@@Miyconst Hello, thank you for your answer! I already have CH341A programmer tool; if anything gets bricked; I can fix it. What if I take full responsibility?
@Miyconst no, i think whith a middle graphics like 6700xt for example the differences of fps Will be more shorts like the 7900xt. Thinking to cheap PC.
I'd love to look at v3 competitors. Especially cheap ones, like 2690 v3. Do you have Ryzen 5 3600 or Ryzen 7 3800? Maybe next year we will see more of these on the aftermarket with good prices.
Hi greeting from UK Myconist, im running macinist mr9 a pro motherboard paired with 16gb ddr4 ram and e5-2666 v3 10/20 cpu I enjoy gaming and creating content for my channel i have seen a massive improvement since upgrading from i7 4790s , however i have been looking at e5 2699 v3 18/36 and thinking of upgrading to that with an extea 16gb ram my gpu is gtx 970 which is sufficient for my gaming atm and i plan to get rtx 2060 super would this be a better combination for gaming and editing ?
In games the CPU and RAM upgrade won't be noticeable because the GTX 970 is just too slow but in video production and other heavy tasks you will see a noticeable uplift.
@@Miyconst I'm useing a V3 in a Z440 for VM's and home-lab stuff rn. Didn't know if you would be interested in a similar comparison or if you already have done one like this in this video vs a Ryzen or another cpu. Just throwing it out there. I'm trying to decide if I want to keep this Z440 or build something else and move on. Appreciate your videos. Have a good one.
It's interesting to see the Xeon either be benefitted or hindered by the memory channels. In some cases quad is better, some cases dual is better. Even more crazy is that the average shows little difference lol.
@@Miyconst Thank you for all the work you've put into these videos. I have a 2699 V3 in a Machinist B9 board. Slightly better VRM (8 phases vs 6 in most) but I still feel like VRM is limited here especially for the higher core chips.
it's great platform unless i3/i5 12th gen or ryzen 5600 2nd become common, xeon will still great value B mobo + ryzen 5600 is still 2x the price of 2680v4 + mobo after all
I have the same CPU..Asrock X99 Taichi with 4x8=32 GB Quad Channel 3000MhZ Ram....Settings:Bus speed 103.6@all core 3.211 MhZ....HT OFF....Memory @1243 MhZ13.13.13.35 421clocks 2T Play most of the Time Battlefield 2042 @UHD with Low Settings with a GTX 1080TI ....my Frames are 50-70FpS
@@Miyconst i play it sometimes, when i have time to update it, always 128 players. I am not too sensitive for stutters in fact... i am used to low specs. The thing i hate is the lack of FSR
Testing quad chanel and dual chanel on qd4/2697v3 and 4 modules 8gb ddr4 desktop. Very minor diference. And in CS2, 2 modules are realy better for everage fps than 4.
@Miyconst Not for me) All people try to buy a 4 channel motherboard. Only for numbers in Aida test mem/cash. X2 in read/write speeds. But in games... It is hard to find the difference. That's why on RUclips I can't find any tests/evidence. Why gamers need 4 channels on xeon. Maybe the loading time will be reduced. I tested 16gb 2 channels and 32gb 4 channels. 16gb is still good for gaming.
quad channel with single rank ram config would be still faster than dual channel in single rank, the difference here is that dual channel used dual rank configuration, which helps to reduce memory access latency as it does not take as long to refresh its memory bank groups. Games first and foremost prioritize memory latency over the total bandwidth, ideally you would have both though.
@h1tzzYT I tell about my expirience and my results of testing more then 10 games with diferent settings. No metter what rank. I tested with 4 modules and with 2 modules. All 8gb desktop memory.
🙂 i just checked and theres a few used X99 motherboards from the major board partners so thats what i would recommend, i dont care for AM4 because thats what everybody is doing already which is boring to me
Hab selbst noch ein I7 6800k@ 4GHZ, 4X8GB ddr4 3000MHZ, Quadchanel, 4080RTX OC, rbar aktiviert, 990pro 4TB Spiele auf nem 34"Uwqhd, IPS, 120hz, Curved, G-sync Pannel, werde mir diesen Monat einen 9800x3d holen, dann läuft die 4080RTX bestimmt 20% schneller!
Большая работа проделана, спасибо. Получается выгоднее всего брать эту платформу если максимально экономить, типа 2697v3 + 2 планки по 16. Видяха типа 5700xt или 3060. Если есть больше денег, то лучше уже купить 7500f + самая дешевая мать и память. Промежуточные варианты я не рассматриваю
The E5-2697A V4 turns out to be more interesting than the 18-core E5-2697 V4. The E5-2697 V4 for was the biggest disappointment for me at LGA-2011v3, it has too much reduced frequency on all cores.
please get intel b580 and test with 2680 v4. the b580 is slightly stronger than the nvidia 4060 and im only showing a 11% BN for CPU intense tasks ON 1440p. i think were 100% fine with 2690 v4 and b580 but if you could test that would be great... bc thats the best budget 1440p gaming if the 2680 v4 can work with the b580....
@@Miyconst awesome. thats it sir, we all know the 2680 v4 is super cheap and ready on the website and now the b580 has clearly hit the gamers approval and hype... you have one of the best channels and i cant even imagine how many gamers you have helped around the world with all your information and dedication
@@Miyconst 7500f is less than 110 right now on AE!!! Im saving up for 7500f and really just not going to purchase the 2680 v4.. theres no point in 2025 buying 13 year old tech when we can get 7500f for 110
Perhaps these Xeons could be better tested with Hypervisor/VM setups. These CPUs are popular for home servers. Id personally like to see these comparisons with VMs using the Proxmox hypervisor! I currently have the Asus X99 IPMI board with an e5-2697 v4. I'm interested in a board with dual 2667 v3 CPUs, turbo unlocked (if possible).
TBU is very problematic with anything but Windows as far as I know. Testing Proxmos I couldn't even get it to boot with TBU, it would lock at startup. Dual socket solutions are designed for a few niche use cases and I don't recommend it for most of the users.
@@Miyconstgood to know. I was considering my z440 as a proxmox candidate. After looking at this chats comments I will probably into a gaming PC and get something else for server/ proxmox/ etc. thanks
@@Miyconstusing Sodium on Fabric lets you use more than one core for the game (unlike vanilla which is heavily ipc limited) for the Java version, Bedrock should use more cores by default (but runs on anything so testing this version would be pointless imo)
@@Miyconstas for testing methodology I would use the same "seed" at a high render distance (32) in the same spot and record fps maybe while moving around to capture stutters while loading parts of the game (make sure to enable all cores in Sodium settings)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Thanks for all the hard work testing it
and to x99 - it was hell of a ride partner
What do you mean "was"? It still is, for many many users. 😃 Thanks for the support, as always.
@@Miyconst X99? Ha-ha, farewell my X79 setups since 2019 (first edit. - E5 2640+Kllisre X79M3+16Gb DDR3 2133 MHz+RX570 4 Gb, later it grown to E5 2689+Machinist V2.82+32Gb DDR3 2133 MHz+RX5700XT). Those were pretty capable somehow, especially with such a price. Few weeks ago I've shifted to AM4 (R5 5500+Jginyue B550I+16Gb DDR4 3600MHz+RX5700XT) - difference is big, I love my new setup. Thanks for review and hints for this ITX board, you helped me in my quest for a new mini board so much, Miyconst.
@@Miyconst
correct, around the world alot of gamers can still use intel 775 and be very happy.... tech is growing but more than 50% of our world to game can use your vids and 580, b580 to game as they want
@@Kevin-vh6nn 771 to 775 modded xeons and oc to 4.2ghz are still VERY usable for general tasks and lightweight gaming. Just slap a modded W10 ISO and you're all set. RX 580 should be good enough.
It's impressive that a nearly 10 year old platform is still this relevant. There are lots of useful tasks for these machines. I'm still using two x79 Xeon v2s for basic 3D design and programming tasks. They work perfectly fine.
The V2s are still perfectly usable just too slow in many tasks without the AVX instructions and very power inefficient.
I am still using x299 with x9900x and 4 channel memmory, it's still quite good, just like 450 usd mini pc with r7-7845hs 🤣
@@MiyconstThey are very power inefficient, but they are very easy to cool. I have a 2697 v2 that won't go above 70⁰C with a single tower Freezer 34
Same, got a Asus board with 2 of the w ones with high clocks. 128gb ram, happy days for all I need.
¡¡¡Por fin !!! es posible la traducción mediante IA al Español de este canal. 👏👏
I got my kid a HP Z440 2697v4 with 1080. Runs games really great and computer is silent. 100x More quiet than my gaming PC. Slava Ukraini!!
1080, you mean a GTX 1080? Yes, it's a very decent combo for an entry level PC. Glory to the Heroes.
bruh aint there a war
thank you sir. I really enjoy the x99 platform. Got several servers with xeon e5 series cpu. Love all those threads :)
Great video K. Now in pt-br!! Good!
Just got a xeon e5 2697a V4 paired with a HP Z440 and RTX 2060 super. An upgrade from xeon 1225 v2 lol. R 5600 build in my country was expensive so xeon ftw
That's a great budget setup and with RTX 2060S you will be GPU limited in most of the cases.
Thanks for all the hard work and time spent on this video i really appreciate it.
In my opinion X99 is still worth the money if you can find a cheap workstation like I did for $60
I'm playing all the actual games with a E5-2690 V3 3.7GHz 12/12 (Unlock, undervolt, FSB OC), 32GB 2133 quad-channel 12-13-13-27, all the games running at 4K 60FPS Mid/High (FSR balanced) on a 6700 XT, in resume, my GPU is bottlenecking the E5-2690 V3 at 4K 60FPS native, want a upgrade to a 4070 Ti so soon...
Very similar situation here, E5-2697 V3, more RAM than I know what to do with at 2666 and low CL, RTX 2080Ti, and my GPU is the bottleneck not the CPU, playing at 4K60.
@@samwalker7567 Thank you for helping me prove these CPU's can handle this high resolution. I am using the 2697 v4 with a 3060, and I tested with a 3080 from another pc just the other day. Both GPU's were the bottleneck with a monitor of 1440p 180hz.
*Thanx for the great video and videos my friend* 🫡🫡🫡
Great work and for taking the time to do a deep dive into the V4 CPU.
It's hard to argue against the performance of the Ryzen, especially given that it's so close in price to the old Xeon platform. I think the few remaining things the X99 has going for it is support for massive amounts of quad channel memory and a ton of PCIe connectivity (even though it's only Gen 3).
For me personally, I've been considering getting an X99 platform with either a 2690 v4 or 2698 v4 for home lab purposes since it's by far the cheapest option even compared to older Threadrippers. Looking forward to seeing productivity benchmarks since that'll be my primary / only use case 🙌
my GPU doesn't being detected in display adapter , i dont know how to enable it in bios😢
thanks for the effort!
Long live X99.
Ive enjoyed your content and because of your tutorial for turbo unlocking ive been able to help my friends who were on tight budgets(300-400€) to get great value builds.
(300€ builds 2697V3, X99-D4 plus, cheap DDR4 ECC 32gbx2, 1tb nvme, GTX 1080, 750w psu, pcie wifi, small case with towercooler)
(200€ 2640V4, 2x8gb ddr4, X99-P4, RX570 4gb, 500gb nvme, 500w psu)
(410€ E5-2697V3, 4x8gb ddr4, X99-D4 plus, 1tb nvme, RTX3060Ti mini, 750w psu, wifi pcie, towercooler, small case).
*SO FAR NO ISSUES OR DEAD BOARDS*
Personally still runing the E5-2697V3 12c/24t active and manual OC to 3.7 all core with RTX3070Ti(my board is the X99 rampage V extreme with LN2 bios on)
Personally the boards woth issues ive had vere just the X99-RS9(Very hot VRM when even idle with 2666V3) and X99-D4 (bios not turbo unlockable)
Ive used x99-P4 with 2660V3 turbo unlocked with out issue
X99-D4 PLUS woth 2697V3's also turbo unlocked with out isssue(besides cpu being limited to 3.4ghz woth 14c active and 3.6ghz with 10c active)
*long term testing* build my classmate a pc with E5-2690V3(turbo unlovked 3.5ghz) 4x8gb dual rank ddr4(3600mhz sticks runing at 2133 cl11)
Jingsha X99-D8 and for the GPU Rx6800 16gb. That system after 2(soon 3 years) still going strong with out issue.
Those are some really nice builds for the budget. I can't imagine getting similar performance with any other platform.
nice video bro, here in brazil the e5 2697av4 is more affordable, because has less taxes or something like that, now i have more information about how that cpu will perform, so thanks for that compare, is a little difficult find information about this cpu on internet :)
On the next year will we see a b580 benchmark on 2011-3?
Appreciate your work. I am still using and building servers with x99 parts.
Brazil 💚, nice video. ☺
🇧🇷🇧🇷
So many great testst :) If possible id like to see a comparison with 5960x vs xeon e5 vs ryzen 5 / any new platform
great extensive details. thanks
great video, as someone still on an old E5-2680 V4 I think a more realistic paring for this kind of cpu is more like an RTX 3060 or Radeon rx 6600xt, meaning a budget system and would be fun to see that in the same testing and see how much the cpu impacts a lower tier graphics card
I have this exact CPU paired with a RTX 3060 as you mentioned. The 3060 is great and will play any game I need at high settings, at 1440p ( Monitor is 180hz). However, it is a bottleneck for the CPU. Still looking to upgrade GPU eventually.
@Morrow420 I happen to have an RTX 3060 ti and I get a slight cpu bottleneck instead so I dont think you can upgrade much over your 3060
@@peterhallbus1114 Interesting. I planned to get the 2699 v4 and a new GPU, then grab a second x99 mobo and upgrade my GF's system. Either that or a 6950X but the prices on that chip are a little high. So If I ever run into any bottlenecks Ill upgrade.
@@Morrow420 the 3060 ti is like 30% performance over the regular 3060 so depending on what upgrade you go for that might be fine, I also game at 1440p. the 2699 v4 is a nice upgrade as long as you play games that really support multicore cpu's, many still like higher clocks over cores at six to eight cores. I personally think my next upgrade will be a consumer chip, but that might be a few years away since I'm currently content with what I got
Thank you for doing this still. I always like entry xeon content, even when it's negative. I have built a few rigs with the utter lowest cost options i could get there on ali and off locals, and i am always surprised with the capabilities of even some of the trashiest x99 parts. I would love to see 2640v4 content, that one at an easily accessible $4 each seems too good to be true.. its a shame my $21 white qiyada x99 boards are nowhere near as exceptional😂. A few months ago i couldnt imagine building such usable machines for around 150 usd
I have an office PC that I lug around with between temp IT jobs. I use it as my main rig for everything. It has all ewaste parts. 1660 v3, x99 ws asus 3 way titan xp. It can play games all the way up to 8k with no issues at all! X99 is immortal!
Correction power usage is the only issue lol
Yeah, E5-1660 V3 is a space heater when overclocked.
@Miyconst Indeed! Especially at 4.8ghz
Still rocking my 2690 V4 with RTX 3070. Will be upgrading to AM5 next year, probably Ryzen 7700.
Still rocking on my 5930k that will turn 10 in a couple of weeks.
Hi i bought mechanist x99 mr9a pro max motherboard and 2666 v3.
I need a other BIOS to turbo unlocked , ant to enable resizable bar. Or that model has already proper bios ?
As expected the CPU is a beast in modern AC Titles
Hi, I have an e5 2680 v4 with a Qiyida brand motherboard (the one with a fan on the DRM) but my processor is limited to a TDP of around 20 W, so I lose performance. Do you know what I should do?
Hey I plan to use my 2011-3 machines running with Linux as long as they continue to provide the performance I need.
The 4x8gb vs 2x16gb differences with E5 2697A config is super interesting to me. So with 4x8gb on such platform you are getting quad channel operation with single rank per channel configuration, where's with 2x16gb you get dual channel operation with dual rank configuration, which surprisingly wrecks the quad channel, single rank configuration, huh interesting
I wouldn't call "wrecks", the performance is about the same.
@@Miyconst Well yeah, when you look at total average, but there are games where dual rank setup completely demolishes single rank setup, like in battlefield 4 and fortnite case. Its very surprising since i totally thought that the quad channel bandwidth would give a significant advantage in games, but it seems its not the case in vast majority of games. Thanks for benches :)
Last week I bought a 18-core E5-2699v3 on Aliexpress for 35 euro's including shipping. Now that's price performance I would say.
I have a question about the bios for Huananzhi X99 TF with c612 chipset. will the bios that is theoretically in the tab for this motherboard from wavypalasbabys -50/-50 rebar work with it? installation via ftp? anyone tested the bios on this motherboard?
There are several different X99-TF revisions with mutually incompatible BIOS. If you plan to try an unknown BIOS - prepare a CH341a first.
@Miyconst I have multicontroler nuvoton nct5532d and bios chip winbond 25q128
i have bios chip winbond 25q128 and multicontroler nuvoton nct5532d
bye x99, you've served us well 🤝
hola que maquina usas ahora ?
@@eleonormota919 Todavía uso el viejo Haswell para mi computadora personal, con un procesador E3-1231 v3. Pero pasé de la plataforma X99 a la AM4 para las PC que vendo.
@@wood6454 que bueno que ya te hayas actualizado ,yo estoy en ello jajaja .. saludos
Excelente vídeo!
Hello, I have the 2697A V4 what would you say the best gpu to pair it with?
The best in terms of what and for what games? In general, I would go with Intel B580 or AMD/Nvidia alternative of the same performance level.
@Miyconst for games
What is your display resolution?
@@blackbirdest 1080p
xeon 2697 v3 is the best? How much can OC it?
What u think xeon vs erying 11980hk ES or QJ01 mobile lga to z270 gigabyte motherboard?
I see these mobile mod can be OC and perform like a 13600kf,idk if will be my case in z270 ud3 xp sli model.
Am interesting in upgrade ram too.. are cheap now ddr5 32gb?
I dont see erying with x16 pcie express for mine 3090 card.
3 years with my cute xeon e5 2640v3 and my flammable qiyida x99 h-9 motherboard, I don't want to say goodbye xd.
7500f is LESS than 110 right now on AE
its time to save up for am5.... 7500f is ready for the next 10 years and at that price its unbeatable
@@Kevin-vh6nnokay consumer
to be fair id build new if i had the budget and no other reasons to go for other platforms (such as pcie lanes) as well
im dreading to ask how much time have you spent compiling all these results, big props
I don't know myself but it's a lot. 😂
guys one question do you know any specific motherboard x99 chinese that support tmp 2.0 out of the box?
So far I am not aware of any such motherboard.
@Miyconst thanks a lot I was curious about that since I have a huananzhi p4 and I wanted to swap it since it doesn't have any possibility to put a tmp2.0 and I needed to update to win 11
@@giorgiogalli6176 use hacks like rufus to install/upgrade to win11
hello i want to know if the bios for the Machinist X99-PR9 is same as PR9-H???
No, it's two different motherboards with two different BIOS versions.
@@Miyconst can u ulpoad the bios for PR9-H
You can really see where extra cores help out. I assume a 5700/5800X would do much better where cores matter than the 5600.
Undoubtedly. The only problem is the price. 😀 Also, it's not about "extra cores" it's about the overall performance of a CPU. Ryzen 7600 is still a 6-core CPU but it performs better than 5800X.
@Miyconst It does, but clearly the IPC and clock improvements of the 5600 aren't enough to cover the lack of cores. That's about it.
Why so difference between dual and quad channel
Please watch the video or at least its conclusion.
Great video as always. But what about produtivity? Do you think the xeon e5 is still relevant in that functionality? A assembled a dual 2697v4 for video editing and a second one for geoprocessing and a think the cost benefit is hard to beat.
If you have a task that scales well across many cores and requires lots of RAM, it's next to impossible to find something more cost effective than LGA 2011-3.
I don't have any experience with video editing, by the way. I just felt an unreal difference compare to the 7th gen i5 my friend had. But... Do you think for premiere use and video compiling it was a god choice ? If not, what do you suggest?
I think that dual socket systems are bad for most of the users but if it works for you and you are happy, I see no reason to go into the "what if" territory. Adobe Premiere is known to favor CPUs with strong single core performance but compared to 7th gen i5, basically anything is strong.
Can you make gaming and other benchmarks on a dual Intel Xeon Platinum 8180?
I am sorry to disappoint but I can't do. It would be a huge money waste buying these CPUs. Also, for gaming LGA 3647 is useless.
@Miyconst fair enough
x99-rs9 can handle 100+W cpu's? i thought vrm was weak with only 3 phases..
It can but only if you ensure good VRM cooling and don't torture it with 24/7 load.
What about testing with an intel a750? They are really nicely priced at this time.
What exactly should I test? A750 works just fine with X99 when resizable bar is enabled.
@Miyconst Yes i know! I mean about the relative performance. It would be cool to see how the A750/A770 and especially the B580 that is out now would benefit (or not) from switching from X99 to Ryzen.
are those mobo compatibility with the Arc series graphic cards a good idea ?
I see no reason why it shouldn't be compatible. For the best performance you would have to enable Resizable Bar and that's possible with most of the Chinese X99 motherboards, many latest options even have it as a BIOS menu option.
@@Miyconst ok thanks, i wasnt sure about the resizable bar on x99 ;) ! take care
thank you...?? for all..what about windows 11... can these cpu's run windows 11 and the motherboards? thanks
Windows 11 is not possible unless you add an external TPM that's supported by a few motherboards only.
Hello, already asked in another video and you said 2697v4 but, I wanted to metion full prices.
2698v3 35$
2697v3 35$
2697v4 48$
Which one do you prefer? (2698v3 is brand new, not used)
E5-2698 V3 if you plan to apply the TBU hack and don't care about power consumption, E5-2697 V4 otherwise.
@@Miyconst Thank you!
I have a shoebox full of old random HP Z840 v3 and v4 CPU’s and ddr4 recc server ram. If I wanted to make some PC’s out of it, what’s the best AliExpress single socket X99 motherboard to get? I’m ok with paying a few extra bucks for a better MoBo. Seems like Machinist and Huananzhi are pretty popular, but the tons of model numbers and versions are kind of confusing lol
Do any of them have resizable bar support out of the box? I have a few Intel ARC gpu’s I could put in them
Take a look at the Machinist X99-MR9A (Pro), X99-RS9, and X99-PR9, depending on the price and size you want.
@@Miyconst I ran across the white K9 and like the looks of it! What’s is your opinion of it compared to the other 3?
Sorry, I just bought ASRock X99X Killer + Xeon E5 2699v4 for my new hypervisor 😂 Long life to X99 platform. The upgrade is from i5 9400F
Is E5-2697A V4 better for gaming then E5-2687W V4?
Yes, E5-2697A V4 is better.
Why not compare quad-channel with dual rank memory?
I don't have two more identical 16GB memory sticks at the moment; and I really don't have the capacity for 40 more tests.
Does inspectre make a difference in performance on xeons v3 and v4?
I did not run any specific comparisons but people online always ask me to test with Spectre patches disabled, so that's what I do.
All those x99 motherboards support upto 3200mhz but xeon e5 2697a v4 and other cpus only supports upto 2400mhz, adding 3200mhz rams will make system unstable?
The RAM is backwards compatible and can operate at slower speed. If you use DDR4-3200 sticks, the speed will be automatically lowered to DDR4-2400.
@ thanks sir i was planning building one for myself. Your videos taught me many things
can you let us know how x99 performs in windows 11?
It performs the same as with Windows 10 but certain games won't work without a TPM 2.0 under Windows 11.
i5-10400f or a xeon e5-2697 v3? For gaming and task like world
Definitely i5-10400F.
Meu setup é placa mãe mr9a com 2697a e 64 gb de RAM com uma Rx580, estou vendo para trocar a placa desse meu PC de trabalho.
The comparison between dual channel and quad channel is really interesting. The most interesting result is my primary use case Fortnite with regard to the 1% lows. A 60% decrease in lows in quad channel relative to dual channel.
Yep.. this is a very weird result but I got it consistently. Please beware that I tested Fortnite with a game replay and live gaming might be different. Also, Fortnite constantly gets updates that also affect performance. So, I would say that both configurations are about the same.
@@Miyconst I will have to test it out. When you record game play do you use an App or a capture card? Which capture card do you recommend if you are using a capture card.
@@augold1681 I record with an Elgato 4k60 pro but it has so many glitches that I can't recommend it.
@@Miyconst One last thing. Are you a Raymond Chandler fan?
@@augold1681 I don't think so, since I don't even know who Raymond Chandler is.
Hello, I successfully unlocked the turbo on my Aigo X99 motherboard using your guide. I used 90-50-50 and observed significant improvements in benchmark tests with the 2698v3. I'm getting 19K overall and 2100 single-core scores (PassMark). My question is: what potential issues could I encounter with the 90-50-50 setting? So far, I haven't experienced any stability problems.
And the speed is not always 3.6GHz. However, it's always fixed at 3.6GHz during gaming. Is this normal?
Thank you! Glad you’re here!
If your system is stable - just enjoy the extra performance while it stays so. The risks are cooked VRM due to the extra load and the CPU may just degrade over time and won't tolerate such voltage reduction. Constant 3.6 GHz during gaming is awesome, so just enjoy it.
@Miyconst Got it! Thank you! I turned 2x 120mm case fans to the VRM. After 1 hour of gaming checked the VRM heat and it was 63°. Hope it's safe.
What about Asus Strix X99 Gaming motherboard? Found a good condition used one which is same price as chinese ones in my country. Can I mod it's bios to get turbo all on cores?
Sure, you can, just need to use an external programmer to flash the BIOS.
With a board that supports resizable bar can you run a arc gpu on a old Xeon system without any huge performance drops?
Yes, you surely can.
almost pulling the trigger to buy used Ryzen 7 5700X + B550 board, and this videos comes out. I guess I gonna put the money to get E5-2680v4 and RTX 3080Ti instead. My setup require lot of PCIe lanes and "upgrading" to AM4 is already questionable move anyway. Already invested on 4x32GB of DDR4 RDIMMs is also not helping to upgrade onto AM4.
Having PCs with 2680 v4 and 2660 v3 (with unlock), I would recommend you to add high-tier v3 CPU to 3080ti. 2680v4 worked well with Radeon 5700, but with 3080ti will definitely become a bottleneck.
@blackbirdest thank you for your suggestion! I pick 3080Ti mainly not for gaming, but more as poor man AI workstation. Had 3060 12GB before, and I think 12GB of ram is sufficient, and I need faster card. I currently have 2650v3 (with tb unlock) and 2650v4
Great video, thank you!
So, as the resolution increases, will the gap between Xeon and the Ryzen 5 5600 close? For example, will the CPU bottleneck gradually decrease at 2K and 4K resolutions?
It really depends on the game and GPU used. The gap may decrease but you certainly won't get more FPS.
@@Miyconst Thank you!
Hey miyconst I have an x99 motherboard with a b85 chipset and I was wondering if it was possible to overclock my cpu with this motherboard. I am aware that b85 does not support overclocking but would it be possible to overlock on b85 if I modify the bios or install another custom bios to allow overclocking
Que legal, agora o vídeo tem opção de dublagem. É feita por IA?
Yes, it's automatically made by RUclips AI.
It is youtube feature that is enabled by default on most videos. Yes it is made by AI
4:55 цікаво, що у деяких випадках 2 канали пам'яті на Зіоні працювали швидше за 4 канали. Я би сказав, у більшості випадків. Як так? Ігри на стільки не заточені на 4-канальну пам'ять?
Я зачіпив цей феномен наприкінці відео, якщо коротко то яне експерт з контролерів пам'яті але наскільки мені відомо, якщо планка має два ранги то процесор одночасно може виконати дві операції. Мої 16ГБ модулі дворангові, 8ГБ однорангові.
@Miyconst цікаво все це )
А ще помітив, що на міні-атх материнці відяха не дає використовувати тпм2 модуль. Треба робити якийсь подовжувач на шлейфі )
Ну.. тут залежить від того якого розміру карта. Щодо подовжувачів то це погана ідея. Сигнал затухає та ТПМ не працює.
Hello again! I bought an AIGO X99M D4 motherboards and 2698v3 CPU. I wonder, is there chance if I send you to default bios and you mode it to unlock all cores for turbo? Thanks!
Hello. I don't provide TBU BIOS if I can't test it. The risk of bricking your motherboard is high and I don't want to take it.
@@Miyconst Hello, thank you for your answer! I already have CH341A programmer tool; if anything gets bricked; I can fix it. What if I take full responsibility?
Will be so interesting to see whith a middle graphics like 6600xt, 6700xt, 3060, 3060ti, 3070. Because the differences will be more shorts.
For CPU testing you have to shift load from GPU to CPU. Testing with an entry level graphics card makes no sense for CPU comparisons.
@Miyconst no, i think whith a middle graphics like 6700xt for example the differences of fps Will be more shorts like the 7900xt. Thinking to cheap PC.
I'd love to look at v3 competitors.
Especially cheap ones, like 2690 v3.
Do you have Ryzen 5 3600 or Ryzen 7 3800? Maybe next year we will see more of these on the aftermarket with good prices.
A comparison with E5-2697 V3 is coming.
Hi greeting from UK Myconist, im running macinist mr9 a pro motherboard paired with 16gb ddr4 ram and e5-2666 v3 10/20 cpu I enjoy gaming and creating content for my channel i have seen a massive improvement since upgrading from i7 4790s , however i have been looking at e5 2699 v3 18/36 and thinking of upgrading to that with an extea 16gb ram my gpu is gtx 970 which is sufficient for my gaming atm and i plan to get rtx 2060 super would this be a better combination for gaming and editing ?
In games the CPU and RAM upgrade won't be noticeable because the GTX 970 is just too slow but in video production and other heavy tasks you will see a noticeable uplift.
2666 V3 and v4? Maybe?
E5-2666 V4 I have never seen for a reasonable price and judging by the specs it seems to be pretty bad. The V3 is still competitive with TBU hack.
@@Miyconst I'm useing a V3 in a Z440 for VM's and home-lab stuff rn. Didn't know if you would be interested in a similar comparison or if you already have done one like this in this video vs a Ryzen or another cpu. Just throwing it out there. I'm trying to decide if I want to keep this Z440 or build something else and move on. Appreciate your videos. Have a good one.
hello in 14:21is the left screen stuttering because of the quadchannel?
No, it's because of my video capture card. You can see the frame graph, it's smooth.
@Miyconst oh ok 😅, thank you for your response.
Did you recommend to upgrade from xeon x79 v2 to this new v4 or intel ES mobile cpu with motherboard combo
I recommend staying away from these mobile ES CPUs. Upgrade to AM4 or LGA1700.
Could you try LGA2066 vs Ryzen?
LGA 2066 is pathetically bad for gaming, thus I see no point in such testing.
Bro a kind request. Please try peltier cooler module with some cpus
potente xeon piace bravo
It's interesting to see the Xeon either be benefitted or hindered by the memory channels. In some cases quad is better, some cases dual is better. Even more crazy is that the average shows little difference lol.
The long story short: for gaming 4x8GB or 2x16GB makes little to no difference.
@@Miyconst Thank you for all the work you've put into these videos. I have a 2699 V3 in a Machinist B9 board. Slightly better VRM (8 phases vs 6 in most) but I still feel like VRM is limited here especially for the higher core chips.
I thought turbo unlock didn't work on V4? Or is it 3.1 always?
That's correct, V4 CPUs don't support TBU but E5-2697A V4 holds 2.8-3.1 GHz in games without any hacks.
it's great platform
unless i3/i5 12th gen or ryzen 5600 2nd become common, xeon will still great value
B mobo + ryzen 5600 is still 2x the price of 2680v4 + mobo after all
still using xeon e5 1660v3 on x99 designare..pair with gtx 1080
Hi Man !!! As ever, very detailed video... Do you think chinese manufacturers will do the same with other server socket, as they do from X79 to X99?
It's unlikely. There are no server CPUs like E5 V2/3/4 to make motherboards for.
Good video............. How do they compare in video editing? ............. Again, good thoral job..........
These multi-core Xeons are good for rendering but struggle with live video playback if you apply to many modifiers or effects.
@@Miyconst u mean in DaVinci Resolve or Adobe primer
@@BadBoy11m in general it applies for both but Resolve is known to better utilize multi-core CPUs.
I have the same CPU..Asrock X99 Taichi with 4x8=32 GB Quad Channel 3000MhZ Ram....Settings:Bus speed 103.6@all core 3.211 MhZ....HT OFF....Memory @1243 MhZ13.13.13.35 421clocks 2T
Play most of the Time Battlefield 2042 @UHD with Low Settings with a GTX 1080TI ....my Frames are 50-70FpS
Well.. GTX 1080 Ti is the obvious bottleneck here.
I use E5-2667 v3 with an RX 6600 and it can run any 2024 game, even Stalker 2 @ 1080p on Epic. Without using turbo boost
With FSR?
@@blackbirdest No, TSR with Ultraquality
I think that it is ironic that the only one game i care about in my personal life plays better on x99 : Battlefield 2042
Do you really play BF2042 or it is just a game you like? I tried playing CQ128 and it's a stuttery mess..
@@Miyconst i play it sometimes, when i have time to update it, always 128 players. I am not too sensitive for stutters in fact... i am used to low specs. The thing i hate is the lack of FSR
@@Miyconst I use this CPU and 3060 for this game at 128. I dont really notice the stutters if any, and I notice it effectively uses all cores.
Коли вже відео в соловїною буде?
Не знаю. Можливо ніколи. 😢
Testing quad chanel and dual chanel on qd4/2697v3 and 4 modules 8gb ddr4 desktop. Very minor diference. And in CS2, 2 modules are realy better for everage fps than 4.
Yeah, this is pretty unexpected. I would assume that quad channel configuration should be at least 5% faster.
@Miyconst Not for me) All people try to buy a 4 channel motherboard. Only for numbers in Aida test mem/cash. X2 in read/write speeds. But in games... It is hard to find the difference. That's why on RUclips I can't find any tests/evidence. Why gamers need 4 channels on xeon. Maybe the loading time will be reduced.
I tested 16gb 2 channels and 32gb 4 channels. 16gb is still good for gaming.
quad channel with single rank ram config would be still faster than dual channel in single rank, the difference here is that dual channel used dual rank configuration, which helps to reduce memory access latency as it does not take as long to refresh its memory bank groups. Games first and foremost prioritize memory latency over the total bandwidth, ideally you would have both though.
@h1tzzYT I tell about my expirience and my results of testing more then 10 games with diferent settings. No metter what rank. I tested with 4 modules and with 2 modules. All 8gb desktop memory.
🙂 i just checked and theres a few used X99 motherboards from the major board partners so thats what i would recommend, i dont care for AM4 because thats what everybody is doing already which is boring to me
Sometimes you just want a plain simple and boring solution that just works, especially when building PCs for your relatives. 😃
@@Miyconst 🙂 sure, thanks for the benchmarks
I'd rather use Apple silicon over anything AM4 or AM5. Intel all the way. If not, then Apple I guess.
@@Morrow420 🙂 sure, whatever gets you motivated
Hab selbst noch ein I7 6800k@ 4GHZ, 4X8GB ddr4 3000MHZ, Quadchanel, 4080RTX OC, rbar aktiviert, 990pro 4TB
Spiele auf nem 34"Uwqhd, IPS, 120hz, Curved, G-sync Pannel, werde mir diesen Monat einen 9800x3d holen, dann läuft die 4080RTX bestimmt 20% schneller!
Большая работа проделана, спасибо. Получается выгоднее всего брать эту платформу если максимально экономить, типа 2697v3 + 2 планки по 16. Видяха типа 5700xt или 3060. Если есть больше денег, то лучше уже купить 7500f + самая дешевая мать и память. Промежуточные варианты я не рассматриваю
А зря. Ryzen 5700x3D/5800x3D для игр очень даже интересны.
@@FeNUMe but still way more in price
The E5-2697A V4 turns out to be more interesting than the 18-core E5-2697 V4. The E5-2697 V4 for was the biggest disappointment for me at LGA-2011v3, it has too much reduced frequency on all cores.
Yeah, V4 in general is disappointing in terms of frequency. V3 would be a pathetic disaster as well but TBU saved it.
The best e5 for gaming is the 1680v3 at 4.3 ghz, in my opinion.
That's an opinion one may have. 😃
We stand with Vietnam, Iraq, Avganistan, Serbia, Bosnia...
Feel free to but what does it have to do with Ukraine?
please get intel b580 and test with 2680 v4.
the b580 is slightly stronger than the nvidia 4060 and im only showing a 11% BN for CPU intense tasks ON 1440p.
i think were 100% fine with 2690 v4 and b580 but if you could test that would be great...
bc thats the best budget 1440p gaming if the 2680 v4 can work with the b580....
It surely can work and it would be a very nice combo for 1440p gaming. Still, what exactly do you want to see tested?
@@Miyconst
awesome. thats it sir, we all know the 2680 v4 is super cheap and ready on the website and now the b580 has clearly hit the gamers approval and hype...
you have one of the best channels and i cant even imagine how many gamers you have helped around the world with all your information and dedication
@@Miyconst
7500f is less than 110 right now on AE!!!
Im saving up for 7500f and really just not going to purchase the 2680 v4.. theres no point in 2025 buying 13 year old tech when we can get 7500f for 110
@@Miyconst
crap, yday the 7500f was 109,
it jumped back up to 125 today... owel thats still a great price
@@sascha6841 X8 PCI-E 4.0 vs. 3.0 difference is not critical at this level of performance and LGA 2011-3/X99 does support Resizable Bar.
Perhaps these Xeons could be better tested with Hypervisor/VM setups. These CPUs are popular for home servers.
Id personally like to see these comparisons with VMs using the Proxmox hypervisor!
I currently have the Asus X99 IPMI board with an e5-2697 v4. I'm interested in a board with dual 2667 v3 CPUs, turbo unlocked (if possible).
TBU is very problematic with anything but Windows as far as I know. Testing Proxmos I couldn't even get it to boot with TBU, it would lock at startup. Dual socket solutions are designed for a few niche use cases and I don't recommend it for most of the users.
@Miyconst Well, that's disappointing. Thanks for the information!
@@Miyconstgood to know. I was considering my z440 as a proxmox candidate. After looking at this chats comments I will probably into a gaming PC and get something else for server/ proxmox/ etc. thanks
damn, i was late.
sadly no minecraft...
Man.. I tried. Testing Minecraft is a total mindduck.
@@Miyconstusing Sodium on Fabric lets you use more than one core for the game (unlike vanilla which is heavily ipc limited) for the Java version, Bedrock should use more cores by default (but runs on anything so testing this version would be pointless imo)
@@Miyconstas for testing methodology I would use the same "seed" at a high render distance (32) in the same spot and record fps maybe while moving around to capture stutters while loading parts of the game (make sure to enable all cores in Sodium settings)
X99 is Dead! Long Live X99!
I'm glad, it only makes the parts cheaper for everyone.