Replaced my shifter cable today. This video was very helpful, especially the part about taping the new cable to the old. We tied the two cables together with a couple of zip ties before we duct taped them together. Added another zip tie and retaped the cables once we had pulled the cables thru the firewall and into the driver compartment. Machine is back in service. Thanks again.
Hey Buck. Thanks a lot for taking time to show us , how its done. I am changing cable on my Ranger 1000, rigth now, and i was actually starting to get a litlle worried, as i had to assemble more and more. But it seems to be the only solution, which you showed us! 🙏 Regards from Denmark Martin🌲🔥
This video will certainly help. I'm down to getting the tunnel guard off and getting the new cable through the firewall. That looks to be the hardest part. Hoping it goes as well as yours appeared to go. Thanks for the video! Much appreciated.
Im working on one for a customer, it has a/c and all the duct work. Man what job! Very poor design to have to take apart so much stuff just to replace that cable. Thanks for your videos it does give an insight as to what has to be done!
Hi Buck, Any tips on how to remove the air breather. I've got the machine stripped down but not sure on how to remove the air breather caps so I can take out the underhood liner so as not to damage the gasket around the entry port which the cable runs through. This is something you mentioned in your video. Thanks for video, it is very helpful.
How do you get through that grommet? Great video that has help me a lot. I just can get through the grommet in the dash board. Mines a North Star edition
My shifter did the same thing when i put it in H. It just freely dropped. I manually put it back in park. Itll shift up to N L H. But not back. Does that mean mines probly broke as well? Itll push it into gear but wont pull it out?
this video was EXTREMELY HELPFUL !! i just wish i bought the right cable before i fed it through everything 😂
@@YarielSantiago-c7r thanks for the kind words. That sucks you gor the wrong cable.
Replaced my shifter cable today. This video was very helpful, especially the part about taping the new cable to the old. We tied the two cables together with a couple of zip ties before we duct taped them together. Added another zip tie and retaped the cables once we had pulled the cables thru the firewall and into the driver compartment. Machine is back in service. Thanks again.
Where did ya get the cable? I am finding some for 179.00 and 40.00
Hey Buck. Thanks a lot for taking time to show us , how its done. I am changing cable on my Ranger 1000, rigth now, and i was actually starting to get a litlle worried, as i had to assemble more and more. But it seems to be the only solution, which you showed us! 🙏
Regards from Denmark
Martin🌲🔥
Glad the video helped.
Thanks for showing this process!
This video will certainly help. I'm down to getting the tunnel guard off and getting the new cable through the firewall. That looks to be the hardest part. Hoping it goes as well as yours appeared to go. Thanks for the video! Much appreciated.
Im working on one for a customer, it has a/c and all the duct work. Man what job! Very poor design to have to take apart so much stuff just to replace that cable. Thanks for your videos it does give an insight as to what has to be done!
Dude this really helped us out. Great video!!
Good lord Brett. I hope mine never breaks. 😂
How to install new seatbelts...seems simple accept the Welded part at the top🤦♂️🤦♂️
P.S. great video
Hi Buck, Any tips on how to remove the air breather. I've got the machine stripped down but not sure on how to remove the air breather caps so I can take out the underhood liner so as not to damage the gasket around the entry port which the cable runs through. This is something you mentioned in your video. Thanks for video, it is very helpful.
Not sure, I've never messed with them. Sorry.
How do you get through that grommet? Great video that has help me a lot. I just can get through the grommet in the dash board. Mines a North Star edition
I honestly can't remember. It's been a while. Sorry.
Spraying the rubber grommet and cable with isopropyl alcohol works wonders!
Thank you bro good job !!!
Exactly where mine broke.
My shifter did the same thing when i put it in H. It just freely dropped. I manually put it back in park. Itll shift up to N L H. But not back. Does that mean mines probly broke as well? Itll push it into gear but wont pull it out?
Yes. Sounds like the cable is snapped.
@@bucksgarage1 Dang. Well idk what to do. This one has the AC/heater vents & what not. I'm afraid its gna be a nightmare.
@@bucksgarage1 btw, what lift is that your using?
@ctrip34 it's a twin busch low rise lift. I have a few videos about it on my channel
@ctrip34 I bet it's going to be. Mine was a pain and it is basic.
hello, can you accept business cooperation？
Yes
@@bucksgarage1 Do u have e-mail？
@@StarknightMT_official bbuckley82@gmail.com