how to connect automatic changeover switch for generator | Electreca
HTML-код
- Опубликовано: 26 июн 2024
- how to connect automatic changeover switch for generator
00:00 Introduction
02:18 Component explained
04:36 Main contactor control circuit
13:07 Generator contactor control circuit
21:42 Generator signal cable circuit
24:40 Contactor assembly
25:30 Main contactor control wiring
33:54 Generator contactor control wiring
37:57 Notes on main and generator control circuit
39:31 Test, connection changeover switch to generator
An automatic changeover switch is a set of components connected in a simple control circuit to control two (2) sources of power supplying the same load at a time.
Automatic changeover switches are used in situations where you want a second source of power to come in after the main or utility supply has gone, the second source could be a Generator or solar
In case the second source of power is Generator, when the power shuts down the changeover starts the generator automatically and also connects the load to the generator. when the main power comes back the changeover switch changes the position from the generator contactor to the main contactor and takes the generator into cooldown and then shut off the engine.
An automatic changeover switch can be either three (3) phases or a single (1)
No matter the rating, size and phase control circuit remains the same.
The generator automatic changeover switch comprises two (2) parts
Namely
Main component part and generator component part
MAIN COMPONENT includes
Timer on-delay
Relay(DC or AC)
Phase failure (single or three phases depends on the power)
The contactor ( with mechanical interlock)
Control circuit breaker
GENERATOR COMPONENTS includes
Timer on-delay
Relay(DC or AC)
The contactor ( with mechanical interlock)
Control circuit breaker
What you need for a changeover switch(VIDEOS)
1) Phase monitor • Explaining phase monit... • HOW TO WIRE|CONNECT PH...
2)Relay • Relay switch explained
3)Timer • How on delay and off d...
4)Contactor • how does a magnetic co...
Manual change over video
• Manual changeover switch
Other videos to watch
STAR DELTA STARTER VIDEO • star delta starter con...
TIMER VIDEO • How on delay and off d...
FORWARD REVERSE WIRING DIAGRAM VIDEO • forward reverse switch...
FORWARD REVERSE WIRING VIDEO • forward reverse motor ...
CONTACTOR SELFHOLDING VIDEO • contactor self holding...
contact me here
electreca.workshop@gmail.com
follow me on Twitter / davidssengendo
like my Facebook page / electerca
Visit my blog electrecasolutions.com/blog/
Buy contactors here amzn.to/39iW0p2
Push buttons amzn.to/3qN2DpN
AI Digital Multimeter amzn.to/2R1Q2mp
Need a float switch amzn.to/34TZStI
Disclaimer: ELECTRECA is a participant in the Amazon Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.com
This is so great,finally I did it using AC and it worked so perfectly.Thank you very much.you won yourself 1 subscriber for this.
Perfectly explained and display. Thanks and appreciate.
Very nice demonstrations, I wish also you would include and elaborate on generator delays.Thanks a lot
Wonderful,and thank you sir..
My best online tutor congrats,,
I've learned a lot from this video,,,
Looking forward and waiting for another video...
Thanks a lot!
Hello morning big man I need yo
line ?
Thanks for your in-depth explanation
this man you are wonderful teacher i love your teaching
I learned so many things form you
Thank you very much Sir
Thank you sir. Very educative.
Can you do stuff like teaching how to read electrical diagrams?
Thank you! Well-presented video!
Thank you vey much, am going to try it
Great informative videos.
Simple and to the point video
Thank you and thanks for watching
Sir thank you very much for your great work. You have a blessed day
Very educative
Surprised that you are Kenya great thanks
I'm very interested brother for see this video
This channel has been so helpful ❤
Great tutorial, well done sir.
Trimakasih sudah ber bagi ilmu saudara ku semoga ber manfa,at👍👍
Many thanks and appreciation for the knowledge.
I have learnt from you alot thanks my dear brather
Great video thanks
Very clear & Nice episode,
Congratulations.
Thank you very much!
very nice demonstration, it so helpful, thank you.
You are exceptional Sir💪.
You were born for such a time like this 💞!
Very informative, thanx alot for sharing
You are the best
Hai sir you explained very nice drawing with practical Thank you
I am a big fan I have been following all your videos kudos!
Sir , thank you for explanation ,very impressed ...
Your welcome and thanks for watching
Thank you bro for knowledge...
Thank you very much sir for this insight.
Very educative piece. Keep it up
Well detail explaination ..nice content . Thank you.
Perfect explanation
Bro I appreciate cause I learn mo
Great work Sir 👍
Привет. Отлично. Спасибо большое
So so educational and well explained tutorials, big up bro
Thank you very much. That was all I needed to know. 😊💯👍👊
So valuable n informative video.... excellent brother....
Thanks very much
Super super thankyou engineer davi
Thanks Linos👍
Very informative video. I learnt a lot from this. Thanks.
very nice explanation sir
Beautiful illastration
Excellent service
thank you so much for sharing this information bro
Engineer welcome back 💥
Thank you Erick and thanks for watching too.
well demonstrate, thanks for sharing
Thank you sir
Much much value to me thanks
Absolutely incredible
That's good explanation keep it up
Great work Sir 👍. I am learning alot from your channel
Good dood thank you so much
Great video, no one has ever shown this! But still show how and where to connect the signal cable to the generator from main relay its ok.
Its what Iam after more
Thanks a lot you are the best
Thank you so much for sharing your knowledge with us. I want you to please do a tutorial on how to synchronize Huawei power cube, the DG and the ATS.
Good job
Yes much much value to me thanks very much
Oh Sir good triend . God bls u
very good
thnx instructor for the good work am so greatful
You are very welcome
Kyakabi thanks have learnt a lot today
webale kusima.
Am more than interested
My first time to understand 🙏🙏
awsome you're smart keep it going
Thank you
You're welcome and thanks for watching.
Where is neutral for Timer on the first diagram. Nice video my man.
Nice one
Wow that was easy
very nice love that
Thanks 👍👍😊
Very interesting
Thanks for taking time and watch.
Please I really need more information about this
good vedios but may you add more vedios on sequential motor wiring diagrams
what a helpfulvideo!!! bro good job kbsa.
Thanks for watching.
Amazing video... thank you for the content..
can you please make for us a video on generator maintenance (fuel & oil filter, changing oil, & more)
am interested to learn the most common brands, CAt, perkins, etc
I will drop those videos soon,
Thanks for watching
tanks vergood bro
I love your videos bro , I find them very informative and educational, I've been learning a lot , some stuff you don't learn , I recently just passed my trade test now in September 2022 , can you please post the link for the connection of the generator signal wire , thanks bro and keep up the good work , God bless 🙏👍
am back for your videos.....
thank sar l am learning
Following your tutorial sir , you mentioned DC coil on the contactor and relay , can I also use ac coil contactor
Your video made me understand the auto ON/OFF but please can you drop the link to the video of how to connect the signal cable to the generator? Thank you!
I love it
Thanks!
Thank you
Great job, please use red cables for Main and blue for Gen for easy identity
Thanks for the tip!
I would wish that you take me through the safety emergency relay.
Great work done, thanks
But you didn't show how to connect generator signals
that's nice
Waaauu great
Hey David
Kindly thanks a lot for your good teaching us
I would like to request if it's possible to show me and other interested one
How Hotel laundry big wash machine
Trouble shooting (failed)
Thanks for your kindness.
Thanks for this video. Please can you apply same principle to 3-phase generator?
Yes, Thanks for watching
Interesting lesson,thanks alot sir.Could you make avideo how to connect 'signal cable'on Diesel Generator?
I will organize it. Thanks for watching
Nice video sir, sir in deep sea controller a starter motor to cranking what relay use it, i see inside panel they have 8pin relay and 4 pin, i hope you give some idea, thanks
Thanks. Would you please share the circuit diagram?
And what is the use of diots on a relay main contact?
Good shows but what the voltage of relays