Be one of the only few who support and find value in my videos. Please spare some change to help the channel keep moving forward. www.buymeacoffee.com/ersbit
Excellent video! I would like to add that for the iPhone 15 and onward models, the back glass is secured with screws located on both sides of the charging port. To remove the back glass, these screws must be taken out, as they attach the back glass to the frame. I hope this information is helpful for anyone attempting to replace the back glass for the first time. good luck with the repairs!
Yes. It much simpler but with new added risks. Cutting the cables on the back of the glass is the most important. Now if you get a glass fully assembled with Camera Glasses it will be a very easy open remove install cables then close.
Yes but yes because before ios18 I replaced one back with parts and everything worked well. No issues even the wireless mic nfc part from iPhone 14 worked on my iPhone 15 without any trigger for unoriginal parts.
In the video below I got everything from apple. They are selling the back glass also but it's a lot pricier than regular online stuff. I think theirs is like that because they might include all these stuff attach to the back glass. ruclips.net/video/oI1IcmaGULQ/видео.html I am in the US the self service repair is operational not sure if you're outside if they will send you parts abroad.
Just Google apple self service repair their website will pop-up in the top with other apple websites. Back Glass generally comes separete from the wireless mic and flash just like the ones I got in the early day.
Great video but I have a few questions. 1. What can I do if my flash light from the camera broke due to a fall. Is there a backcover with flash light, microphone, the MagSafe coil and flex cable? 2. If so, is all this accepted by the iPhone or is there an error message that the microphone or coil is not original? 3. how is the flex cable of the flash light and the microphone connected to the coil? Is there also a connection to the cable or is it firmly welded there? I hope you can help me
Hi. The wireless coil micro and flashlight are not software lock to the motherboard. I tried one aftermarket wireless micro flashlight on my iPhone 15 it worked well no issues on that part (😀very happy they did not tie it). Finding a back glass with everything can be very hard. I cannot find one with everything. Recently found a back glass with Camera lenses then also found a wireless micro flashlight circuit separately. As time goes you may find back glass with everything pre-installed for sale.
Everything here is same as iPhone 15 and 15 Pro. Even wireless micro flashlight of iPhone 14 works on iPhone 15 (I tried it already) ruclips.net/video/fcuaQ27RyW0/видео.html
What are the sizing measurements of the back glass? I mean the height the length and the thickness but im not sure if I translated it correctly. Thank you in advance!
So my biggest question is: Are those backglas components software-locked or not? Never forget, apple could activate retaliations long after this phone came out. Ios 18 will just deactivate the camera? Who knows
Exactly, they are capable of doing that. This is why I showed exactly how to safety remove the back components for anybody to avoid being locked of features just in case it should cause any trouble with any apps. I heard it's locked from another video iPhone 14. The iPhone 14 has the same design. I do not have another 15 Pro to swap parts but most likely they have it linked to the motherboard (most likely the flashlight which is a camera components) camera always disable something when you change it on these phones.
Your spot on non original part message comes up in camera settings should you replace that flash light I found out on Reddit by some one who swapped with another iPhone 15 pro unfortunately apple will not leave these non genuine parts messages alone due to anyone who returns their iPhone to an Apple Store their technician can then tell that the phones been tampered with this is why they do have these non original apple parts message sad !
Update I replaced the back glass on a iPhone 15 and now says unable to determine if back glass is genuine and can’t function properly 😢stupid apple this can stop flash light working
The only I know for certain is to pressure test the device to make sure it holds air a a certain psi. DIY or even common repair shops do not all have this machine to certify a repaired phone water resistant after they finish with it.
...don't test it in water as if it doesn't work the phone can be permanently damaged. After repair just avoid water or never submerge the phone in water rain and light water on the surface should be fine if the repair was done right. Having a case also provide one extra layer for water no to enter the phone.
The most durable will be the 14 Pro. The 14 Pro has glass plus a full metal plate spot weld to the frame. The 15 Pro a metal plate only around the camera 😅. Those are the reason why I think the 14Pro is more durable and well designed. Now both comes with good and bad. 14 Pro super hard to fix the back unless you have access to a laser. The 15 Pro is relatively easy when you get a back with pre-installed metal plate on the back.
Hi it was at the max. Here's a more detailed video with heating temp and time on he screen Apple iPhone 15 Pro Max Back Glass Replacement Repair Friendly ruclips.net/video/KtkZAoTWCR8/видео.html
That's very strange...I have done mine multiple times for video purposes and mine still works. I don't know if it would be linked to the wireless stuff. Maybe check the settings to make sure it is still on. I would need to reopen 1 15 or 15 Pro remove the wireless connector to see if I get the same. Just like this I cannot pinpoint exactly.
hi while i was disassembly my iphone 15 base model i broke the flex cable of the wireless charger, if i change the wireless charger module that will stop kernel panics?
😄 if it is broken yes. If you don't have it connected yes. If you replace it with an aftermarket wireless flash ext mic assembly no. Everything should be fine like on the 15 am writing you with. It doesn't have the original but one bought online.
I got mine on ebay, It was like 35$ at the time I did it. Only downside with mine is the mic seem to not be as good as the original while recording videos etc....
I heard simething aobjt some part attached to the back glass that has to be peogrammed with the right sereal number so its pointless to be able to replace rhe glass. Is that true?
Yes. It's linked to the motherboard. The way I did it is the only way to keep everything working together. I successfully removed the back cables and coil then it will be reattached to a new back glass and installed. That would prevent any issues. The only big issue would be if the back got cracked and the cable also was damaged.
The way it has been designed there is not need for the laser machine. If you try the laser machine the primary risk will be to damage the small parts that are directly attached to the glass unless the laser burn only the double sided tape ONLY on the edges along the sides of the phone. In that case the laser machine is still relevant but it would be faster to just use alcohol or heat to remove the back glass. The laser machine can certainly still be useful.
You will lose or you should lose wireless charging, flashlight and microphone (external). There's no way to see which side of the cable control which components. The big issue when this cable is damaged is random reboots and issues with the device. The iPhone IOS does run components checks in the background randomly and for sure 100% when you are about to update the software. So if it got broken you might experience issues at one point sooner or later. Losing the external microphone might be a problem when trying to record videos or being on speaker phone.
Can someone please help in need desperately if someone knows I did this carefully removed iPhone 15 pro max back glass and now it’s rebooting anyway gone to check back by removing back glass and noticed right under the camera on or underneath there’s a slight notch when I took of the back glass it’s torn a little flex but don’t know what flex it is right under the bottom of the 3 rear cameras on the left of it there’s a little hole what appears to be some little flex
Carefully check the flex circuit on the back glass. It might have been damaged (when you try to do ios update you will end up in infinite reboot). My experience was the same the circuit was damaged on the back glass it was working (had flashlight and mic plus wireless charging they all were working) there was a cut in the flex. Then when I updated to 17.2 the infinite reboot started. I stopped only when I replaced the circuit. During updates ios will check all components if one is missing or damaged it may start randomly rebooting. (This is from personal experience and my deductions)
@ thank you for replying mate much appreciated I did try without back glass and the flex disconnected still same issue it definitely seems to be a flex that runs along the top of the battery whatever that is for so until I know the exact flex I can’t repair unfortunately
@@ersbit it was the antenna flex after bud I replaced it and put a new back glass and now stopped restarting however the led flash don’t work on the new back glass :(
Yes, but if you buy from Apple it will be a price difference over $120. The cost effective is getting one with cameras attached and transfer the old wireless/mic/flash.
I would not consider it water resistant to the point that I am confortable Submerging the phone in water or other liquid. I would avoid any situation the device would be fully Submerged.
i use it beacuse it-not fucking the type c port anymore and it's easier to jul let it on a desk i made a diy one on my desk and i just place it there and it charges it's just for at home thow
Hey there! Thank you for your video! I recognized that when i push on the back cover of my iPhone 15 Pro in the area where the flex cable is located my phone makes crackling noises. Did you experience similar? I ve check all the iPhone Pros in the Apple Store, some have this issue and some not.. do you know whats the reason?
It must be the way they assembled the phone. It's functional but you may feel these things (hopefully it does not compromise the water resistance). Personally I haven't felt it before doing this. Mine was a 15 Pro the cables should be shorter on the 15 Pro compared to the pro max. If you can exchange it with zero fee you should change it and see if you get one without that issue.
@@ersbitI already got an express replacement from apple and my new iPhone15Pro crackles even loader than the original..so in fact it got worse.. :-( Looks like there is a quality issue..
So basically they made the back removable but made it in such a way that a normal user would damage the flash or the wireless charging easily.... ohhhh classic apple~!
😅that can be a way to summarize it. Also technically they can move all those inside and leave the back free of cables (maybe they will for the iPhone 16 and wait for us to praise them and applause lol)
No you do not have to remove it!! I have done and tested on the 14, 15 and 15 Pro. You can remove it but it is not 100% necessary like for a screen replacement or screen removal!
Why not instead wedge out the metal pins holding down the backglass with a plastic wedge stick? it's long enough to get deep inside & provide support for center of the backglass. & metal will be taking most of the force.
As of the newest update to ios you might need to repair the part to the motherboard of needed. If it works without any warning GREAT you don't have to do anything else.
Did I really forgot?? I think you can remove the back without removing the pentalobes but the back has to be at a very specific angle at the bottom for it to work and not break the back glass. Certainly removing the pentalobes should make it easier.
Are you certain?? Replacing the battery, screen, face id, front speaker, flashlight + coil + external mic. It's Apple am pretty sure something will be disabled or won't work right. I don't have another phone to TEST but i have seen on one video that it did affect the camera APP.
If flashlight is replaced you will get a non genuine message with the rear facing camera bloody apple they don’t want u replacing any parts if they have their own way
@@TheSavage3.6 Are you 100% sure? So is it possible to replace a new back cover with a new flex cable from the flash light, microphone and coil in another iPhone without there being an error message or the parts not working?
There’s some companies that do custom backs. You will have to transplant all the internals and if you use metal, you will lose wireless charging capability.
They always had that very complicated design. Even the iPhone 8 is very hard to fix. The 15 series does have a slightly better design. It can be considered easy if compared to previous iphones. The worse that could happen is if the back got broken and the back attached to it is damaged then that's another problem 😂. 100% agreed they are doing or were doing it on purpose to get all the $$$ flowing for Apple care and Apple Authorized repair shops.
You use tools for repair as NOOB. Please don´t upload this videos. Firts buy optional tools for repair. I must cry when you use secund glue for coil...
Think it’s more for educational purposes to be fair preparing users of the iPhone 15pro / pro max what to expect when they do eventually bring the parts to replace out
You got it right 😂. It's to show people. When the glass is available I will find a broken 15 Pro and try again to see how it turn out and then show it again on a phone that is actually broken.
At the time of filming the video. Only Apple would repair these phones and Apple would not seel parts to individuals to make videos or show to other....I will have to wait for our good Chinese friends to create oem copies.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Be one of the only few who support and find value in my videos.
Please spare some change to help the channel keep moving forward.
www.buymeacoffee.com/ersbit
Excellent video! I would like to add that for the iPhone 15 and onward models, the back glass is secured with screws located on both sides of the charging port. To remove the back glass, these screws must be taken out, as they attach the back glass to the frame. I hope this information is helpful for anyone attempting to replace the back glass for the first time. good luck with the repairs!
Great job so you don't have to do a surgery with a heat gun and prying away the old glass like in the older iphones...?
Yes. It much simpler but with new added risks. Cutting the cables on the back of the glass is the most important. Now if you get a glass fully assembled with Camera Glasses it will be a very easy open remove install cables then close.
@@ersbit great thanks alot boss keep it up!!
Should this process be easier now with ios18 letting you register new parts? etc
Yes but yes because before ios18 I replaced one back with parts and everything worked well. No issues even the wireless mic nfc part from iPhone 14 worked on my iPhone 15 without any trigger for unoriginal parts.
Where can I find the full back glass assembly with the mic wireless charge pad ect ?
In the video below I got everything from apple. They are selling the back glass also but it's a lot pricier than regular online stuff. I think theirs is like that because they might include all these stuff attach to the back glass.
ruclips.net/video/oI1IcmaGULQ/видео.html
I am in the US the self service repair is operational not sure if you're outside if they will send you parts abroad.
Just Google apple self service repair their website will pop-up in the top with other apple websites. Back Glass generally comes separete from the wireless mic and flash just like the ones I got in the early day.
Great video but I have a few questions.
1. What can I do if my flash light from the camera broke due to a fall. Is there a backcover with flash light, microphone, the MagSafe coil and flex cable?
2. If so, is all this accepted by the iPhone or is there an error message that the microphone or coil is not original?
3. how is the flex cable of the flash light and the microphone connected to the coil? Is there also a connection to the cable or is it firmly welded there?
I hope you can help me
Hi. The wireless coil micro and flashlight are not software lock to the motherboard. I tried one aftermarket wireless micro flashlight on my iPhone 15 it worked well no issues on that part (😀very happy they did not tie it).
Finding a back glass with everything can be very hard. I cannot find one with everything. Recently found a back glass with Camera lenses then also found a wireless micro flashlight circuit separately. As time goes you may find back glass with everything pre-installed for sale.
Everything here is same as iPhone 15 and 15 Pro. Even wireless micro flashlight of iPhone 14 works on iPhone 15 (I tried it already)
ruclips.net/video/fcuaQ27RyW0/видео.html
What are the sizing measurements of the back glass? I mean the height the length and the thickness but im not sure if I translated it correctly. Thank you in advance!
No idea. They are all standard and will fit. measurements that going beyond everything 😅
So my biggest question is: Are those backglas components software-locked or not?
Never forget, apple could activate retaliations long after this phone came out. Ios 18 will just deactivate the camera? Who knows
Exactly, they are capable of doing that. This is why I showed exactly how to safety remove the back components for anybody to avoid being locked of features just in case it should cause any trouble with any apps. I heard it's locked from another video iPhone 14. The iPhone 14 has the same design.
I do not have another 15 Pro to swap parts but most likely they have it linked to the motherboard (most likely the flashlight which is a camera components) camera always disable something when you change it on these phones.
Your spot on non original part message comes up in camera settings should you replace that flash light I found out on Reddit by some one who swapped with another iPhone 15 pro unfortunately apple will not leave these non genuine parts messages alone due to anyone who returns their iPhone to an Apple Store their technician can then tell that the phones been tampered with this is why they do have these non original apple parts message sad !
Update I replaced the back glass on a iPhone 15 and now says unable to determine if back glass is genuine and can’t function properly 😢stupid apple this can stop flash light working
Hi, could you please share the link where to buy one of this back glass?Thank you!
No longer water resistant? Is there any way to keep it water resistant with back glass replacement?
The only I know for certain is to pressure test the device to make sure it holds air a a certain psi. DIY or even common repair shops do not all have this machine to certify a repaired phone water resistant after they finish with it.
...don't test it in water as if it doesn't work the phone can be permanently damaged. After repair just avoid water or never submerge the phone in water rain and light water on the surface should be fine if the repair was done right. Having a case also provide one extra layer for water no to enter the phone.
As a certified repair phone tech we both know d@m well your supposed to turn that phone off @guillermocanchan8666
Bro
Between the 15 pro and 14 pro
Which one has a strong back glass and is durable ?
Which will you recommend
The most durable will be the 14 Pro. The 14 Pro has glass plus a full metal plate spot weld to the frame. The 15 Pro a metal plate only around the camera 😅. Those are the reason why I think the 14Pro is more durable and well designed. Now both comes with good and bad. 14 Pro super hard to fix the back unless you have access to a laser. The 15 Pro is relatively easy when you get a back with pre-installed metal plate on the back.
what temp. do you set your heat gun?
Hi it was at the max. Here's a more detailed video with heating temp and time on he screen
Apple iPhone 15 Pro Max Back Glass Replacement Repair Friendly
ruclips.net/video/KtkZAoTWCR8/видео.html
Hi thanks for the videos, I noticed that after changing mine, the back double tap function stopped working. What did I do wrong?
That's very strange...I have done mine multiple times for video purposes and mine still works. I don't know if it would be linked to the wireless stuff. Maybe check the settings to make sure it is still on. I would need to reopen 1 15 or 15 Pro remove the wireless connector to see if I get the same. Just like this I cannot pinpoint exactly.
hi while i was disassembly my iphone 15 base model i broke the flex cable of the wireless charger, if i change the wireless charger module that will stop kernel panics?
kernel panics are random restarts
😄 if it is broken yes. If you don't have it connected yes. If you replace it with an aftermarket wireless flash ext mic assembly no. Everything should be fine like on the 15 am writing you with. It doesn't have the original but one bought online.
@@ersbit can you tell me where did you buy it?
@@ersbit I found one on ebay from Germany that is OEM is good? Ebay say It a good seller
I got mine on ebay, It was like 35$ at the time I did it. Only downside with mine is the mic seem to not be as good as the original while recording videos etc....
Great video. Do you mind me asking what charger that is ? It looks sick. Is it safe to use ?
This is a simple USB-C charger with charge indicator..it's on Amazon ( multiple variations)
I heard simething aobjt some part attached to the back glass that has to be peogrammed with the right sereal number so its pointless to be able to replace rhe glass. Is that true?
Yes. It's linked to the motherboard. The way I did it is the only way to keep everything working together. I successfully removed the back cables and coil then it will be reattached to a new back glass and installed. That would prevent any issues. The only big issue would be if the back got cracked and the cable also was damaged.
What about if you carve it on the laser machine?
The way it has been designed there is not need for the laser machine. If you try the laser machine the primary risk will be to damage the small parts that are directly attached to the glass unless the laser burn only the double sided tape ONLY on the edges along the sides of the phone.
In that case the laser machine is still relevant but it would be faster to just use alcohol or heat to remove the back glass. The laser machine can certainly still be useful.
"carve it on the laser machine"
You mean write something on the back or use the laser machine to help with the removal of the back glass?
Do you only loose wireless charging when the flex cable break
You will lose or you should lose wireless charging, flashlight and microphone (external). There's no way to see which side of the cable control which components. The big issue when this cable is damaged is random reboots and issues with the device. The iPhone IOS does run components checks in the background randomly and for sure 100% when you are about to update the software. So if it got broken you might experience issues at one point sooner or later. Losing the external microphone might be a problem when trying to record videos or being on speaker phone.
Can someone please help in need desperately if someone knows I did this carefully removed iPhone 15 pro max back glass and now it’s rebooting anyway gone to check back by removing back glass and noticed right under the camera on or underneath there’s a slight notch when I took of the back glass it’s torn a little flex but don’t know what flex it is right under the bottom of the 3 rear cameras on the left of it there’s a little hole what appears to be some little flex
Carefully check the flex circuit on the back glass. It might have been damaged (when you try to do ios update you will end up in infinite reboot). My experience was the same the circuit was damaged on the back glass it was working (had flashlight and mic plus wireless charging they all were working) there was a cut in the flex. Then when I updated to 17.2 the infinite reboot started. I stopped only when I replaced the circuit.
During updates ios will check all components if one is missing or damaged it may start randomly rebooting. (This is from personal experience and my deductions)
@ thank you for replying mate much appreciated I did try without back glass and the flex disconnected still same issue it definitely seems to be a flex that runs along the top of the battery whatever that is for so until I know the exact flex I can’t repair unfortunately
@@ersbit it was the antenna flex after bud I replaced it and put a new back glass and now stopped restarting however the led flash don’t work on the new back glass :(
to summarize basically buy the most best case you can
Yes, but if you buy from Apple it will be a price difference over $120. The cost effective is getting one with cameras attached and transfer the old wireless/mic/flash.
At this point. Why is there still a glass back of there is also a metal back?
It is for structural rigidity. Without the metal the glass would Crack more easily.
LOS TORNILLOS DE ABAJO SE SACAN ANTES O DESPUES?
@@servitecaconcagua9434 antes. Tiene las mismas entradas que la pantalla.
Does water resistance work after the back glass replacement?
I would not consider it water resistant to the point that I am confortable Submerging the phone in water or other liquid. I would avoid any situation the device would be fully Submerged.
Can we just stop using glass backs. It’s so stupid. How come no aftermarket company has made a plastic back cover replacement.
Wireless charging
@@Euxable I never have used it. I doubt anybody has.
@@alexandrostheodorou8387 Actually that’s the only way i charge at night
bro without it the wireless charging won't exist and plus the heat sink it's gonna suck
i use it beacuse it-not fucking the type c port anymore and it's easier to jul let it on a desk i made a diy one on my desk and i just place it there and it charges it's just for at home thow
HI! Where Could I buy the back glass?
On eBay or Amazon I have put links on the description
Отличная работа👍👍👍
Hey there! Thank you for your video! I recognized that when i push on the back cover of my iPhone 15 Pro in the area where the flex cable is located my phone makes crackling noises. Did you experience similar? I ve check all the iPhone Pros in the Apple Store, some have this issue and some not.. do you know whats the reason?
It must be the way they assembled the phone. It's functional but you may feel these things (hopefully it does not compromise the water resistance). Personally I haven't felt it before doing this. Mine was a 15 Pro the cables should be shorter on the 15 Pro compared to the pro max. If you can exchange it with zero fee you should change it and see if you get one without that issue.
@@ersbitI already got an express replacement from apple and my new iPhone15Pro crackles even loader than the original..so in fact it got worse.. :-( Looks like there is a quality issue..
So basically they made the back removable but made it in such a way that a normal user would damage the flash or the wireless charging easily.... ohhhh classic apple~!
😅that can be a way to summarize it. Also technically they can move all those inside and leave the back free of cables (maybe they will for the iPhone 16 and wait for us to praise them and applause lol)
After replace u can under water youre iphone? Plz reply
Avoid water. It will damage your phone after repair. That's the easy simple answer. If it get water damaged the repair shop or Apple will not fix it.
You have to detach the 2 screw on the bottom first before you open the back glass it may be broke the back cover if youre not open the screw before
No you do not have to remove it!! I have done and tested on the 14, 15 and 15 Pro. You can remove it but it is not 100% necessary like for a screen replacement or screen removal!
hi EBT, what if the back glass cracked, will it be easy to replace?
The process should be the same. The only problem would be to damage the coil or any of the cable attached to the back of the iPhone.
Why not instead wedge out the metal pins holding down the backglass with a plastic wedge stick? it's long enough to get deep inside & provide support for center of the backglass. & metal will be taking most of the force.
Back glasses not pair to the motherboard
As of the newest update to ios you might need to repair the part to the motherboard of needed. If it works without any warning GREAT you don't have to do anything else.
you can see the holes for the screws, of cause you should remove the two screws, and not force it free, bigger chance til break anything
Nice work! But, god(Apple) forbid we have an easily replaceable battery and rear cover lol!! Remember the days?! Ahahaa
Hahah hopefully soon the EU forces them to make it more easy to replace battery and back glass 🤣
I had to turn of the phone first 😂, I still need an explanation while would the camera lens been romoved along side with the back glass
👍🏽
u forgot to unscrew pentalobe screws
Did I really forgot?? I think you can remove the back without removing the pentalobes but the back has to be at a very specific angle at the bottom for it to work and not break the back glass. Certainly removing the pentalobes should make it easier.
rule number 1 turn off the phone 😅
😅. I can agree but after all these years it does not matter. I keep it on specially to make sure I do not overheat and destroy the screen.
@@guillermocanchan8666 yes absolutely I was going to say the same thing
As far as i know there is no software lock on the back side, only on faceid, the front screen…
Are you certain??
Replacing the battery, screen, face id, front speaker, flashlight + coil + external mic. It's Apple am pretty sure something will be disabled or won't work right. I don't have another phone to TEST but i have seen on one video that it did affect the camera APP.
If flashlight is replaced you will get a non genuine message with the rear facing camera bloody apple they don’t want u replacing any parts if they have their own way
@@ersbitNothing on the back is paired.
@@TheSavage3.6 Are you 100% sure? So is it possible to replace a new back cover with a new flex cable from the flash light, microphone and coil in another iPhone without there being an error message or the parts not working?
@@CpC180911 Yes
iPhone 15 Pro Rear Glass Replacement Repair
ruclips.net/video/W9-ZZQ4I34o/видео.html
Wish you could buy the back cover not in glass
There’s some companies that do custom backs. You will have to transplant all the internals and if you use metal, you will lose wireless charging capability.
Fritsch Harbors
Back glass gets worse every year since the 12. Swear these clowns do it on purpose
They always had that very complicated design. Even the iPhone 8 is very hard to fix. The 15 series does have a slightly better design. It can be considered easy if compared to previous iphones. The worse that could happen is if the back got broken and the back attached to it is damaged then that's another problem 😂. 100% agreed they are doing or were doing it on purpose to get all the $$$ flowing for Apple care and Apple Authorized repair shops.
@@ersbit my back glass has never broken or scratched. My bar trick is dropping my 12 flat on the ground
It was the same since the 8. It got significantly easier with the 14, and then that design got carried over with the 15 Pros.
Sigh…my old iPhone 4, 2 screws, back cam off…simple as that. No glue, no nuthin. Why Apple?
Good video…would come in handy if back is ever damaged.
You use tools for repair as NOOB. Please don´t upload this videos. Firts buy optional tools for repair. I must cry when you use secund glue for coil...
Thank you
he just burned the iphone with that heat gun the temperature was way over the limit when he started the phone
I just redid it again the phone is fine does not have any problems. What I your definition of Burned??
well as a concludion replacing it affects battery life
heat afects the most processors and every electronic part
no no no@@alexandrumacavei3223
Yes, but it does not damage the parts if you do no use too much heat.
@@alexandrumacavei3223
Very detailed operation, thank you for sharing,if you are interested in repair tools, please contact me.
Thank you
Where we post to buy the glass this video pointless the public can’t even buy the glass
Think it’s more for educational purposes to be fair preparing users of the iPhone 15pro / pro max what to expect when they do eventually bring the parts to replace out
You got it right 😂. It's to show people.
When the glass is available I will find a broken 15 Pro and try again to see how it turn out and then show it again on a phone that is actually broken.
At the time of filming the video. Only Apple would repair these phones and Apple would not seel parts to individuals to make videos or show to other....I will have to wait for our good Chinese friends to create oem copies.