A question A . I bought a skyrc 2500 pro charger. Practically slot 4 of the battery, whenever I insert the battery to perform charging, discharging or cycling operations, the device gives me the OVERHEATING alert. Always! I thought it was the fault of that single battery the first time. But now he does it to me with any battery in any mode. I did the factory reset and firmware update, but the problem is not solved. Slots 1 2 3 5 6 work great, 4 no. Factory problem? Can they replace it for me? Purchased 4 days ago. Damn
That is sad to hear, I'm not pretty sure though, maybe it's a factory defect. Can you reach out to the person you purchase it from if you can have a replacement for it as it is defective?
@@JBSB i hope the dealer can give me one new battery charger. But those, are bad things to solve, the warranty, the shipment, the long time of this procedure. Sadness
@@bienamorpesa Yes lodi I'm preparing for a motor break-in as well, just waiting for my other break-in system that I will be comparing to this charger in terms of breaking in Tamiya mini4wd motors, thanks for bringing this to my attention. Much appreciated
Yes po kapag break-in mode ang iseset nalang is ano ba ung capacity ng battery mo na isasalang tapos pag katapos nuon automatic na po siyang mag break-in kapag instart mo na po ung break-in
Boss JB! Sa mga baguhan na katulad ko po mas maganda ba na mag break-in nalang sa used chassis ang new motor OR gumamit ng G-Force? I also heard na di rin daw ganun ka-accurate yung G-force due to its voltage gauge. Kahit nakalagay na 2.4 V naka set; mas mataas daw iyon if u check it with a multimeter.
If hnd pa gaanong kalaki ang budget lods pwedeng rekta nalang sa chassis, and disadvantage lang nun compared sa mga pang break-in na system eh consistent ang voltage compared sa naka rekta sa chassis kasi kapag rekta sa chassis eh bumababa voltage ng battery habang ginagamit kaya may chance na ung RPM bumababa din lalo kapag mga lagpas 3 mins tumatakbo ung makina nag coconsume ng voltage sa battery
Good day Idol. Paano nmn po pg charging? Bgo lng po sa tamiya. Bgong bili dn nc2500 pro :) Im currently using eneloop 1.2v 1900mAh. Ano po illagay sa Current at voltage limit. Thank you
Sir jb kung halimbawa hindi ko gagamitin ng matagal or 1month yung battery.... much better po ba na discharge ang battery kung hindi gagamitin or hayaan ko nalang na may charge...salamat po
Pwede naman po lods lalo kung yun ang pasok sa budget, tapos kung boxstock kaya din naman kasi stock motor ang gamit sa boxstock hnd sobrang lakas kumunsumo ng battery voltage po
@@JBSB last boss, pano naman po sa capacity na neochamp 950mah, pano po refresh nun? Like sa fujitsu 1900mah to 900mah, pano naman po sa 950mah na max capacity
@@leedavidsantiago4514 Kahit once lang po gamit itong charger na ito, para lang malaman active capacity tyaka mga active cell magising tapos break in na po, tapos pag mag re-race nalang ay discharge muna tapos rest then charge before the race day
If hnd gaanong mag kalayo ang presyo sa OPUS BT-C3100 sa SKYRC NC1500 ay opus nalang pero kung kaya mo mag SKYRC NC2200 lods un nalang mga 2k may 2nd hand na
Goodmorning lods. Thanks sa tips as usual. Ipon builds muna bago events. ❤
Same lods ipon ipon pa hehe dami pang planong project build sa NonFM 😊
Thanks sa din lods sa suporta sa channel, much appreciated 🥰
Yun oh tamang tama! Good day ho ka-JBSB
Good day din lods :)
Ilan po ang delta peak sensitivity settings? Thanks in advance
Hnd ko pa po na check eh maya po tignan ko ung naka set sakin
A question A . I bought a skyrc 2500 pro charger. Practically slot 4 of the battery, whenever I insert the battery to perform charging, discharging or cycling operations, the device gives me the OVERHEATING alert. Always! I thought it was the fault of that single battery the first time. But now he does it to me with any battery in any mode. I did the factory reset and firmware update, but the problem is not solved. Slots 1 2 3 5 6 work great, 4 no. Factory problem? Can they replace it for me? Purchased 4 days ago. Damn
That is sad to hear, I'm not pretty sure though, maybe it's a factory defect.
Can you reach out to the person you purchase it from if you can have a replacement for it as it is defective?
@@JBSB i hope the dealer can give me one new battery charger. But those, are bad things to solve, the warranty, the shipment, the long time of this procedure. Sadness
@@oiclaconrovilsa5331 I feel you bro
Lods, can you do motor break-in using this unit? Tnx!
You're referring to a battery break-in, right Lodi? or a motor break-in?
@@JBSB motor break in. stock motor and power dash lodi.
@@bienamorpesa Yes lodi I'm preparing for a motor break-in as well, just waiting for my other break-in system that I will be comparing to this charger in terms of breaking in Tamiya mini4wd motors, thanks for bringing this to my attention.
Much appreciated
@@JBSB Lodi, any update sa motor break-in? ano yung current limit dun sa settings nya for motor break-in?
Sir Its Me again , bali doon po sa Break-In Mode ng battery wala n kyo ni set up parang hnd lumabas s mga menu like doon s Refresh Mode ..
Yes po kapag break-in mode ang iseset nalang is ano ba ung capacity ng battery mo na isasalang tapos pag katapos nuon automatic na po siyang mag break-in kapag instart mo na po ung break-in
Salamat po master
Boss JB! Sa mga baguhan na katulad ko po mas maganda ba na mag break-in nalang sa used chassis ang new motor OR gumamit ng G-Force? I also heard na di rin daw ganun ka-accurate yung G-force due to its voltage gauge. Kahit nakalagay na 2.4 V naka set; mas mataas daw iyon if u check it with a multimeter.
If hnd pa gaanong kalaki ang budget lods pwedeng rekta nalang sa chassis, and disadvantage lang nun compared sa mga pang break-in na system eh consistent ang voltage compared sa naka rekta sa chassis kasi kapag rekta sa chassis eh bumababa voltage ng battery habang ginagamit kaya may chance na ung RPM bumababa din lalo kapag mga lagpas 3 mins tumatakbo ung makina nag coconsume ng voltage sa battery
Copy boss! Eh tungkol po sa motor break in; do you think mas-ok itong gamitin compared sa G-force or parehas lang ang result? Thank you!
Good day Idol. Paano nmn po pg charging? Bgo lng po sa tamiya. Bgong bili dn nc2500 pro :)
Im currently using eneloop 1.2v 1900mAh.
Ano po illagay sa Current at voltage limit.
Thank you
600 mAh na po ako sa Charging ngaun at 600 mAh naman din sa discharge
Sir jb kung halimbawa hindi ko gagamitin ng matagal or 1month yung battery.... much better po ba na discharge ang battery kung hindi gagamitin or hayaan ko nalang na may charge...salamat po
Mas okay kung mai-discharge then charge ng isa or dalawang beses kada isang buwan kung hnd gagamitin ng matagal
ok lang po ba yung fujitsu quick charger? boxstock enjoyer lang po hehe
Pwede naman po lods lalo kung yun ang pasok sa budget, tapos kung boxstock kaya din naman kasi stock motor ang gamit sa boxstock hnd sobrang lakas kumunsumo ng battery voltage po
hi po newbie lang sir . ask lang po ng brand ng charger cheapest n may break in mode
Powerex po mga nasa 3k brand new may nag bebenta din ng 2nd hand nasa 2k, or SKYRC NC2200 same ang presyuhan sa Powerex po
Boss kapag luma na ung battery. Ilan mah charge and discharge ang set and ilan cycle and need pa ba un i break in? Ty🎉
Same lang sa in good working condition na batts Lods
Ty2
Malakas ba yan sa kuryente ang charger na SKY RC?
To be honest po hnd ko na momonitor lodi kung malaki konsumo niya sa kuryente, sorry sorry po lodi 🥺
Hi boss JB, after breakin po, pwede napo gamitin battery da race? Max padin po 1900mah sa charge?
Kapag after break in, rest lang po then race day siksikin mo pa din po
@@JBSB last boss, pano naman po sa capacity na neochamp 950mah, pano po refresh nun? Like sa fujitsu 1900mah to 900mah, pano naman po sa 950mah na max capacity
More videos lods dto sa charger n to wala b talaga sya kasama wire pang break-in ng motor? Salamat lods 🙌
Meron po dapat yan Lods may kasama pa pong alligator clip siya
@@JBSB salamat sa pag sagod sir sana maayos n ang delayed transaction para mka gawa kana ulit ng mga tips for tamiya mini 4wd Prayer lng lods. 🙏🙌🙏
Paano po ung sa break in ng motor po boss?
Gagawan ko pa ng video soon preparing lang po ng mga motor na gagamitin
Sir jb, sa break in po ba laging 1900 mAh or dipende po? Salamat
Depende po sa capacity ng batteries for example po sa battery ko ngaun na panasonic, 2000mA siya kaya nung nag break in ako naka 2000
Copy boss jb. Sa refresh po? Ilang beses po kelangan mag refresh sa mga new battery?
@@leedavidsantiago4514 Kahit once lang po gamit itong charger na ito, para lang malaman active capacity tyaka mga active cell magising tapos break in na po, tapos pag mag re-race nalang ay discharge muna tapos rest then charge before the race day
Ok boss jb. Siguro halos same lng sila ng nc2200? May break in at refresh option sya. Sa refresh ba ilan mah sa charge at discharge?
tanong lang po.ok lang ba na double roller 13mm sa unahan at 16mm na my oring sa rear prostock po.salamat po
I pair of roller lang po sa front for ProStock, sa rear lang po pwedeng mag 2 pairs tapos sa MA, AR, and VZ lang po allowed
i mean dpr po idol sa front 😅
@@dosjall Yes po pwede po DPR sa front, nalito lang ako kanina kasi po 13mm ung nabanggit, ung DPR po kasi 13mm sa ilalim 12mm sa ibabaw :)
yown. salamat po idol. godbless 😇
@@dosjall YW idol God bless din po
Sir jb, quick question. Ano po mas okay for beginners opus or skyrc nc1500?
If hnd gaanong mag kalayo ang presyo sa OPUS BT-C3100 sa SKYRC NC1500 ay opus nalang pero kung kaya mo mag SKYRC NC2200 lods un nalang mga 2k may 2nd hand na