Meteor 350 Handlebar on Hunter 350

Поделиться
HTML-код
  • Опубликовано: 1 дек 2024
  • НаукаНаука

Комментарии • 48

  • @rakeshrocky
    @rakeshrocky 4 месяца назад +1

    thanks for valuable information, right now i fixed handle raisers, I was looking for more solutions and ended up here, thanks.

  • @Wanderer_1982
    @Wanderer_1982 2 месяца назад

    In addition to changing the handlebar adjusting the suspension preload setting to 3 or 4 can enhance comfort. While high-speed cornering might be slightly affected, it will make long-distance riding more comfortable.

  • @samitavamondal7432
    @samitavamondal7432 4 месяца назад +2

    First two decisions will be
    1. Change rear suspension to classic 350 reborn
    2. Replace with RE custom tourer seat.
    Since these 2 changes wont affect warrenty then think about replacing the entire handlebar

    • @rakeshrocky
      @rakeshrocky 4 месяца назад +1

      warranty will be void if u do any electric modifications

    • @SoulRidaGears
      @SoulRidaGears  3 месяца назад

      Changing the suspension changes the stability and compromises the ground clearance of the vehicle. Changing the suspension affects the warranty plus insurance. Handlebar changes affects the riding posture and handling of the vehicle.

    • @SoulRidaGears
      @SoulRidaGears  3 месяца назад

      Specifically if you cut the factory fitted wiring, it affects the warranty.

  • @saswatmeher05
    @saswatmeher05 9 месяцев назад

    I am really considering this. Do we need to change clutch cable? Is there any vibration over stock handlebar? Would you recommend this over handlebar riser(normal as well as push back risers) ?

    • @SoulRidaGears
      @SoulRidaGears  9 месяцев назад +3

      Yes.
      1) We need to change the clutch cable from hunter’s to meteor’s as while turning the vehicle hunter’s clutch cable gets stretched.
      2) Vibrations r the same as stock handlebar.
      3) Yes I recommend this over handlebar risers (normal as well as push back). I tried putting risers but it stretches our back and shoulder muscles while turning the vehicle more. Also I personally don’t like the looks of the vehicle with risers.
      So while using this vehicle for touring, meteor 350 handlebar is one of the best options as of now.

    • @rakeshrocky
      @rakeshrocky 4 месяца назад

      @@SoulRidaGears does throttle wire needs replacement???

    • @SoulRidaGears
      @SoulRidaGears  3 месяца назад

      @@rakeshrocky No. Stock throttle cable works fine. You just need to loosen it up from the cable ties.

  • @GhostRider-go7ll
    @GhostRider-go7ll Месяц назад

    Bhai .kitna price pada handle bar and clutch wire + labour charge? Plz reply..i want to do the same change on my hunter

    • @SoulRidaGears
      @SoulRidaGears  Месяц назад +1

      Handlebar is for 900-1000₹, clutch wire is for approximately 200₹ & labour charge would be around 200-300₹

  • @SORABHpilwar
    @SORABHpilwar Месяц назад +1

    Bro new seat comfortable he ?

    • @SoulRidaGears
      @SoulRidaGears  Месяц назад

      Comfortable toh hai but touring ke time pe thodi taklif hoti hai..

    • @SORABHpilwar
      @SORABHpilwar Месяц назад

      @@SoulRidaGears okay bro

  • @nidhikumar8100
    @nidhikumar8100 7 месяцев назад

    I am 5, 3 feet and feeling very comfortable with this bar

  • @krantinagabathula
    @krantinagabathula 10 месяцев назад

    Is there any difference in operating the clutch? Has it become harder compare to the original?

    • @SoulRidaGears
      @SoulRidaGears  10 месяцев назад

      Clutch feels the same, however it gets hard after few days of use same like original one.

    • @krantinagabathula
      @krantinagabathula 10 месяцев назад

      @@SoulRidaGears okay. Actually, I am considering to do the same modification what you have done. But I am worried about the clutch because the original clutch itself feels harder to me. And in case after putting the meteor clutch cable, if it gets even more harder than I’ll have to change everything back which will be waste of money for me.. so I wanted to ensure that it remains the same.

  • @atishsubudhi7511
    @atishsubudhi7511 9 месяцев назад

    Bro,your contents are really helpful
    I am planning for the same. Enquired with my mechanic, he asked me to confirm whether there will be any issue on brake line.He was telling there may be a pressure on fromt brakes abs.
    Can you confirm the same? Plz buddy

    • @SoulRidaGears
      @SoulRidaGears  9 месяцев назад

      Brakes r working fine for me. There is no issues with the brakes. Only make sure that cable ties r removed so that all the wires r free to move. The only thing we need to change is clutch wire.

  • @birla8816
    @birla8816 6 месяцев назад

    Nice video bhai, can you please share from where you bought the handle?

    • @SoulRidaGears
      @SoulRidaGears  6 месяцев назад

      From one seller who sells genuine accessories of Royal Enfield in Pune..

    • @ankitmilmile9143
      @ankitmilmile9143 2 месяца назад

      ​@@SoulRidaGears Can you share the address of this garage?

  • @ananthakrishnanks4389
    @ananthakrishnanks4389 2 месяца назад

    can i fit this handlebar on new classic 350 reborn?

  • @pnaveen5606
    @pnaveen5606 10 месяцев назад +1

    any vibrations in handle after fixing meteor hanlde bro

    • @SoulRidaGears
      @SoulRidaGears  10 месяцев назад

      Yes. There r usual vibrations on the handlebar. Stock mirrors r less useful on the highway.

    • @pnaveen5606
      @pnaveen5606 10 месяцев назад

      thank you for the reply… one more question- will changing handlebar is fine in city rides or is there any difficulties while handling in city? thinking to chnage my stock handlebar to meteor handle i only do city ride for my office purpose…

  • @lijojohnyjohnylijo
    @lijojohnyjohnylijo 8 месяцев назад

    which crashguard have you installed? can you give a link?

    • @SoulRidaGears
      @SoulRidaGears  8 месяцев назад

      It’s from bandidospitstop.com

  • @X5kc
    @X5kc Год назад

    Bhiya apna Ismai handle bar riser use keya ha kya?

    • @SoulRidaGears
      @SoulRidaGears  Год назад

      Nahi use kiya. Muze handlebar raisers pasand nhi aae try kiya tha pehle.

  • @amitchauhan2017
    @amitchauhan2017 Год назад

    All accessories ka price wala video please

  • @RV99972
    @RV99972 10 месяцев назад

    How about using RD350 wala handle bar?

    • @SoulRidaGears
      @SoulRidaGears  10 месяцев назад

      Yes. Can be used but needs to make many adjustments. On specific points holes to be drilled for proper fitting of switches & mirrors. Also the original quality of RD350 handlebar is hard to find.

    • @RV99972
      @RV99972 10 месяцев назад

      @@SoulRidaGears I am 44, and I am unable Kiran forward for a long time as I am on the heavier side. I am not sure if it is worth keeping hunter due to the handle bar issue... Do you think if I install meteor handle it will resolve the shoulder pain issue

    • @agnijitdeb1558
      @agnijitdeb1558 5 месяцев назад

      ​@@RV99972The handlebar and the rear suspension are the two main drawbacks of this bike. The handlebar is not low, it is far. I will install this handlebar as of now. Lets see. Should be able to achieve upright posture when seated closer to the tank. The rear suspension is still bearable. Will change it after a few years to the classic one.

    • @agnijitdeb1558
      @agnijitdeb1558 5 месяцев назад +1

      ​@@RV99972On second thoughts. I was thinking about selling mine and buying a new bullet. Will go to the dealer tomorrow to see how much more I have to pay for the same. You could do the same. The hunter looks good, but is not comfortable. It's better to sell it and go for any other bike. In my opinion the bullet will be good for you too. It's well balanced and an overall very successful design.

  • @AmitKumar-es3ut
    @AmitKumar-es3ut 7 месяцев назад

    seat konsa hai ye brother?

    • @SoulRidaGears
      @SoulRidaGears  5 месяцев назад

      Seat company wala hi hai bro. Just cover dala hai.

  • @jazzys7061
    @jazzys7061 Год назад

    hey man, what's your height?

    • @SoulRidaGears
      @SoulRidaGears  Год назад

      It’s 5’9” - 175cm

    • @jazzys7061
      @jazzys7061 9 месяцев назад

      I also wanted to ask - scrambler handlebar vs this meteor handlebar.. which is better honestly?

  • @adarshnaik352
    @adarshnaik352 Год назад

    Bro install RE Interceptor 650 handle bar

  • @pineapplepie9662
    @pineapplepie9662 8 месяцев назад

    Hi bro. Mene 2 din pehle meteor handlebar se replace kiya and the comfort is much better.
    Baas ek dikkat hai, clutch aur brake lever thoda neeche ki taraf angle ho gya hai pehle se. Mene showroom se fit krwaya aur wo bole ki they cant do anything about it. Any way to fix this?

    • @SoulRidaGears
      @SoulRidaGears  8 месяцев назад +1

      Yes bro..usko nhi fix kr skte..but kuch days baad aapko aadat ho jaegi..👍

    • @pineapplepie9662
      @pineapplepie9662 8 месяцев назад

      @@SoulRidaGears actually abhi usko thik kr liye. Mene handle thoda apni taraf jhuka liya and now the feel is better than before. Levers ko bhi thoda sa upar move kr saka.
      This will depend on your height and sitting posture, us hisab se adjust kr sakte hai.