Hi Engineer ! I have a problem with my FADAL machine , specifically on the Z axis trajectory, this axis never arrives to table automatically. What values i have to modify in the SO ? Best Regards from Mexico
Hello Florentino, sorry for the delay. Please check out this video here ruclips.net/video/0yaC3dg6Hnw/видео.html This covers all the items for basic operation of a fadal from turn on, tool offsets, work offsets, and turn off.
Hello Muhnd, G10L10 is a command you can use to modify the value stored in the tool length offset table from within the program. G43 is used to actually apply the selected length offset to the position of the axis.
At-Man Unlimited Machining thanks for the quick answer if i understand what you mean is the G43 is apply the tool length from the table that stored by G10L10?is it works togther(G10L10andG43)
In most cases people measure and set the tool length values in the table ahead of time and do not use the program to set them. The G10L10 is a way you can modify those values from within the program if you needed to. I have not seen a use for it personally. Yes, calling G43 will tell the controller to take that offset value and apply it to the axis position.
thanks for the great info master !!
BEEN A LONG TIME SINCE YOU PUBLIC YOUR LAST VIDEO. HOPE YOU EVERYTHING ALRIGHT AND COME BACK TO VIDEO MAKING SOON.
I'm starting to get back on track. Very busy still, but should have time to make some more content.
Great video
hello I'm was wondering how do you set your G54 in a Fadal? I know how to do it in a haas
Hi Engineer !
I have a problem with my FADAL machine , specifically on the Z axis trajectory, this axis never arrives to table automatically. What values i have to modify in the SO ?
Best Regards from Mexico
I'm not sure I understand the question, could you provide more information?
Enrique Mandujano
do you think you can make a video on how to set a G54 please?
Hello Florentino, sorry for the delay. Please check out this video here ruclips.net/video/0yaC3dg6Hnw/видео.html This covers all the items for basic operation of a fadal from turn on, tool offsets, work offsets, and turn off.
Thank you for sharing
Welcome
can you explaine the relation between G10L10 and G43 ?
Hello Muhnd, G10L10 is a command you can use to modify the value stored in the tool length offset table from within the program. G43 is used to actually apply the selected length offset to the position of the axis.
At-Man Unlimited Machining
thanks for the quick answer if i understand what you mean is the G43 is apply the tool length from the table that stored by G10L10?is it works togther(G10L10andG43)
In most cases people measure and set the tool length values in the table ahead of time and do not use the program to set them. The G10L10 is a way you can modify those values from within the program if you needed to. I have not seen a use for it personally. Yes, calling G43 will tell the controller to take that offset value and apply it to the axis position.
Thank you very much
You should make this video but show step by step in the machine instead of the teory
Been on the list for a while now, your not the first to ask. I did a video close to that in the general operations