My Darth Vader helmet cooling system build...
HTML-код
- Опубликовано: 25 авг 2017
- In this video I show you how I set up my Darth Vader helmet cooling fan system. a little bit of fresh air flow goes a long way in costume!
These are the parts I use in this helmet if you want to make your own:
battery pack(13-14 hrs run time): amzn.to/2XdTVXf
speed control: amzn.to/2Wb4069
3x of these fans: amzn.to/2LJa69P (carefully spray paint black if they show)
voltage display: amzn.to/2E9fVqu
for a 5v setup to use with USB power banks or the USB port on the battery listed above:
5v Blower Fans: amzn.to/2LJ0EmM (if you don't want to cut holes in your helmet)
5v fans like in my video: amzn.to/2W4xzGc (carefully spray paint black if they show)
use any 5v usb battery pack with this setup
My gear:
camera: amzn.to/2egA1SH
lens: amzn.to/2eDBYIG
mic: amzn.to/2cvb1pw
tripod: amzn.to/2eKLoBu
drone: amzn.to/2ddJlpA
gopro: amzn.to/2kMF16T
iphone lens: amzn.to/2cvymHk
iphone mic: amzn.to/2cZ9IyR
iphone stabilizer: amzn.to/2eKIOeO
Tripod: amzn.to/2cfADYo
Tripod Phone mount: amzn.to/2cZ9zLU
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
If you enjoy these video's like them and subscribe to my channel for more!
Follow me:
Instagram: / alaskavader
![Eminem - The Death of Slim Shady [Album Trailer]](http://i.ytimg.com/vi/X0HIrS6kUYI/mqdefault.jpg)
The Vader helmet looks sick
Tommy Newby your no Vader your just a child... in a mask
Hey Jake, Another awesome video! Thanks for all the advice your sharing. I just ordered everything linked to run a 5volt system in my helmet. I have my first event as Vader on the 18th. I’m excited about it, we will also have a Princess Leia, and Obi-wan kenobi
Great Video ! Thanks for the help. Getting ready for Dragon Con here in Atlanta
Good very important informarion ! Thanks for this !
You're welcome!
Welp! that sute of armor of yours dose look hot. altho where i come from i would only were it during the fall and winter because our winters are about 20 to 30 degrees were as our summers are around 100 at highest. it looks nice to have a cooling system in your helmet. good video man. i gave a like.
Thanks a lot. It is hot to wear but not too bad since i have fans keeping the air in the helmet fresh it makes a BIG difference!
This is what I subscribed for
U R Greate ..thnks for helping and all of your Videos...much inspiring me.. to go for my 501stGoal
Glad to hear it! thanks
Cool! I love it! Vader is a sexy ventilator! I love Vader!!!!
Can you do a video on detail of how the fans hook up to each other and control board and the connections to the battery pack?
Great video, I just installed two fan unit into my TD lid. I have the same shirt BTW.
nice! I love this shirt lol one of my favs
Pretty vader helmet.
Very interesting. Imagine David Prowse did it without fans.
Hey Jake, Thanks for the Sub! Great Videos !
I purchased a couple of super quiet fans, but even with rubber grommets between the fans and the plastic helmet they were too loud. My voice is transmitted using my throat mike system so that was not a problem, but I would not be able to hear anything people would say to me...especially kids who re very timid around my costume! I'm 6'5". How are you able to hear what anyone says?
Hi, i have an efx standard Vader helmet and just bought a set of fans to go in my helmet similar to your setup. I was wondering how i would cut into my helmet to put in the two smaller fans near the top, and how i would secure them in the cut out holes.
That's Fantastic Alaska Ask your parents can I come over man lol!Its that cool bro hands down Great job twice A!👊
lol thanks
Hey, Jake. I purchased all the parts to this, and am installing them in my ESB helmet. Can I ask how you mounted the fans? I can't really tell from the video, but they don't seem to be screwed, and you seem to have a square hole and the fans are just sitting in there, did you glue them?
Do you still have your cooling fan setup this way in your helmet today? I just received my Portmac and am considering the same? I already got the items you listed, but am a bit concerned with the amount of airflow those fans put out....it doesn't feel like much as compared to the 5v ones I have in my trooper helmet.
Jason
Hello! I do a lot of decontamination with full body suit and full face respirator mask and I would like to install those blowing fans in my mask! I am wondering how do you connect the LED screen to the rest of the system ?
Hello! Pulled the trigger on the ANH Quasi! I made the transducer voice set-up you did the video on....works like a charm and can't wait to mount it to the armor. I see that the power pack is the same as the one for the Revo, so 1) where did you mount it, and 2) are you running BOTH Revo and fans off a single pack? Thanks! MTFBWYA!
I put one in my helmet for the fans and one on my belt for the repo. Cheers!
Where in the helmet to you hide the big battery?
Where are you mounting the battery pack in the helmet? My concern has been moisture from sweat shorting the damaging the battery pack.
I use velcro to mount it on the back side of the dome on the top no problems for me with sweat or moisture. the fans really help keep the helmet ventilated
Hi my husband got a dearth Vader helmet wats the best fans to use like wat I’ve done to ur any help would be much appreciated.wat parts do u use and whet from
Nice helmet ! Are you able to see the fan in the mouth when you're wearing it ? I meant can other people see it ? Will one of those fans be okay with the 9 volt ?
yeah it will. People can't see the fan in mine and I can't see it either. Works like a charm. Any fan at all will help a lot!
@@alaskavader7317 hello i have a qusten do you no wear i can get one from Darth Vader voice Changer
Hi is it a fieberglas helmet or ABS?
Where did you buy the helmet
Great Video Jake! Long follower of your videos. I have applied many of your techniques to my EBS Vader Costume. Can you help me find the link to your supply list for this cooling system? Thanks in advance!
nevermind Jake, I found it!
+jjej c yay!
how much kost this JMC Helmet? :)
Hey Jake. Is this the same helmet that I just purchased from you? Just love it!!
+Reno Rodriguez it is one and the same ;).
Haha. I own a famous helmet. Super awesome.
@@renorodriguez8073 Is there anyway you can post a pic or video of the internals (hookup wiring)?
can you help me get a good vader costume like yours its super cool
Where can I get this helmet?
Who made your helmet?
hey jake do you no how i can make a Darth Vader voice Changer just asking i have a sute and it dos not coming with talking any quatens just massage me if you have
When I find out where you live
I’m coming to you home
Find your helmet
And keep it