Hi Peter....yours is the first video I've seen with the clear external pipe and fittings on the outside ...same as mine. So the clear pipe goes from attachment b round to another fitting? There's no instructions for it at all. Is it necessary do you think?
Hi Karen, sorry my apologies. Now I know what you mean. So the clear pipe connects to the spa and to the control unit to pump the water through to heat the water then pump it back out into the spa.
@@RandomVlogsTV hi Peter....thanks for that. I've set mine up on foam tiles inside on carpet in a spare room but I'm uneasy about it leaking. And I've not got my chemicals right so going to empty it. Is the connection with the clear pipe a good place to attach the hose pipe to empty it do you think?
@@karenjoyce2932 hi Karen, you don’t need to empty it if the chemicals are not right. All you need to do is add more PH up or PH down to the water to make sure the chlorine concentrate is at a safe level. You can adjust it as many time as you want. Do you have test strips for the water? My spa had a plug on the floor of the spa that I just opened up when inside the spa to drain it fast however if you disconnect the clear hose from the main unit it will drain slower that way.
Fer Clau Hi, I do keep it on all the time however after 72Hrs it will go to sleep mode. If you want to save some energy then the best thing to do is switch it off. Don’t leave it off for to many days as the water will go funny. Sleep mode is an automatic setting in the unit set for safety rather than conserving energy. Hope this helps you :)
there's a inflatable pad that mine has that you fill with air and seat on...too hard to sit on the bottom without it...its floats to the top when not in use and keep the water warm...Ya think?
Hi I have the Vegas version I've added the water but not the chemical tablet yet as I'm waiting for the delivery of them...when is the best time to add the chemical tablets?.I havent heated up the spa yet going to heat the spa up Friday night at 10pm ready for Saturday evening.
Taz 74 Hi Taz, I wouldn’t let the water go for to many days as it may go stagnant. However seeing as you are going to put the chemicals in Friday you should be ok. Just make sure your PH levels are on point before getting in. To much chlorine will make you itchy 😀 Enjoy mate
My tub sometimes stops heating at 102°. Am I doing something wrong or does it have something to do with the timer? I haven't used it set time! Does that have something to do with it? Thank you so much!!! Joe...
Joseph Augustitus hello, I think it’s best not to use the timer at all. Generally I would just turn it on and adjust the temperature to the desired temperature. The best thing for you to do is press the little black button on the side of the unit which would reset the unit then you can turn it on and set the desired temp again. However if you leave the spa on it will automatically turn itself off. It’s a safety system so the engine doesn’t overheat. Usually it will last 48-72hrs on and then turn itself of. Hope this helps you Joseph.
Hello, the rest button is a black round button which is on the side of the plastic engine in the middle. press the button and that should help with the 03 issue. Hope this helps.
Sorry for the delay getting back to you. All you need to do is unplug the devise then plug it in and hold reset. This will reset the heater on the unit to re-start the start up procedure. Hope that helps :)
it comes in handy when boondocking
Hi Peter....yours is the first video I've seen with the clear external pipe and fittings on the outside ...same as mine. So the clear pipe goes from attachment b round to another fitting? There's no instructions for it at all. Is it necessary do you think?
Hi Karen, sorry my apologies. Now I know what you mean. So the clear pipe connects to the spa and to the control unit to pump the water through to heat the water then pump it back out into the spa.
@@RandomVlogsTV hi Peter....thanks for that. I've set mine up on foam tiles inside on carpet in a spare room but I'm uneasy about it leaking. And I've not got my chemicals right so going to empty it. Is the connection with the clear pipe a good place to attach the hose pipe to empty it do you think?
@@karenjoyce2932 hi Karen, you don’t need to empty it if the chemicals are not right. All you need to do is add more PH up or PH down to the water to make sure the chlorine concentrate is at a safe level. You can adjust it as many time as you want. Do you have test strips for the water? My spa had a plug on the floor of the spa that I just opened up when inside the spa to drain it fast however if you disconnect the clear hose from the main unit it will drain slower that way.
Thanks!
I want to save some energy. Do you keep the spa on all the time ? Also Do you know how to tell if the spa is in hibernation or sleep mode ?!
Fer Clau Hi, I do keep it on all the time however after 72Hrs it will go to sleep mode. If you want to save some energy then the best thing to do is switch it off. Don’t leave it off for to many days as the water will go funny. Sleep mode is an automatic setting in the unit set for safety rather than conserving energy. Hope this helps you :)
there's a inflatable pad that mine has that you fill with air and seat on...too hard to sit on the bottom without it...its floats to the top when not in use and keep the water warm...Ya think?
Hi I have the Vegas version I've added the water but not the chemical tablet yet as I'm waiting for the delivery of them...when is the best time to add the chemical tablets?.I havent heated up the spa yet going to heat the spa up Friday night at 10pm ready for Saturday evening.
Taz 74 Hi Taz, I wouldn’t let the water go for to many days as it may go stagnant. However seeing as you are going to put the chemicals in Friday you should be ok. Just make sure your PH levels are on point before getting in. To much chlorine will make you itchy 😀 Enjoy mate
@@RandomVlogsTV thanks for reply I appreciate it.
Yes. I understand why it didn't inflate after I made this video
Is the unit waterproof?
Mr Anderson hello and thanks for your comment. The entire unit is waterproof.
My tub sometimes stops heating at 102°. Am I doing something wrong or does it have something to do with the timer? I haven't used it set time! Does that have something to do with it? Thank you so much!!!
Joe...
Joseph Augustitus hello, I think it’s best not to use the timer at all. Generally I would just turn it on and adjust the temperature to the desired temperature. The best thing for you to do is press the little black button on the side of the unit which would reset the unit then you can turn it on and set the desired temp again. However if you leave the spa on it will automatically turn itself off. It’s a safety system so the engine doesn’t overheat. Usually it will last 48-72hrs on and then turn itself of. Hope this helps you Joseph.
Well my kids like it :)
Jeanette louise I love it too. Reasonable price and great value
How did u get urs to heat up mines so slow
B MONEY I usually heat it up over night or first thing in the morning. If it’s a warm day it should heat up fast but you must keep the lid on tight.
Nice review. I am on my 3rd year with mine. I have a review of it on my channel. Liked and Subscribed.
Jester's Aquatics thank you very much
the bottom does NOT pump up....it would pop.... bottom stays flat
Estee Creel I did check that after I made this video. Makes sense not to have the bottom inflated. Thanks for your comment
Terrible set up advice 0 help
I agree! Cute tub at great price. But tearable directions! LOL!
Why I have like an 3 upside down 03 and how I can reset?
Hello, the rest button is a black round button which is on the side of the plastic engine in the middle. press the button and that should help with the 03 issue. Hope this helps.
Sorry for the delay getting back to you. All you need to do is unplug the devise then plug it in and hold reset. This will reset the heater on the unit to re-start the start up procedure. Hope that helps :)