Donk build is one of the best shows in Hoonigan, the nostalgia of early DT hits me so hard. Can't wait to see how it turns out. Much love from Puerto Rico
Was the first thing I was worried about too. Had a new cross member put in my G8 when the trans was swapped. Rattled like no tomorrow and made me not want to drive the car about. in this case the motor will probably be plenty loud to drown it out, even at idle.
@@rx8tom There are like a thousand ways to fix this problem everyone seems so worried about, but yeah, exhaust wrap would fix it in like 10 minutes and as many dollars.
Yall will see when they put it up on This or That....It's going to be another heavy hitter. Did you see what they made the Hoonicorn capable of?! They aren't playing around!
Because of Honnigan, Dan, Suppy I learned how to TIG weld a year ago I specialize in alloy wheel repair. The just send it attitude made me find something I actually love to do.
Suppy is the beast from the east. That man puts in work. You did a good job too scotto. Well done. I think I speak for all of us when I say this is one of the most entertaining builds yet.
I do that a lot too. Even though i try to label and sort all the parts of a project i still forget which bolts go where, and this is the easiest way to prevent that.
Since I ever first saw a donk (on the Netflix show Fastest Car lmao) I immediately fell in love. Can't wait one day to build my own! Much love to y'all from Canada, keep up the killer work on that beauty.
More series' like this fellas! I know with everyone's schedules etc., this isn't always feasible but damn is it the BEST to see everyone at the shop into a project together.
Hey Scotto if I see you having Volkswagen Audi troubles at that time we meet, remember this moment and if you get it just smile and expand that mind of yours like you just showed us!
I just have to say, thank you all. For working so hard an love into all your content. On top of that when needed an thought of wearing masks. That in its self could help at least one more person to do so also, sounds silly and I'm rambling. Lol my bad. Love peace and axle grease brothers ❤
No one on youtube has done all that spectacular of a job when it comes to filming welding, but it also serves to remember that the camera's sensor is attempting to see would typically blind someone. Welding is not an easy thing to film, but neither is filming inside or outside a car going 180mph. I'd love to see the film and fab teams collaborate on making a nice tripod adapter for a welders mask for the camera to "wear".
I really love that you guys use all the protective gear, I used to scream at the guys on American chopper for not wearing gear, secretly hoping the get zapped. I only say this because my welding instructor was put in a wheel chair for half a year when he accidentally backing into a live table.
Hey I don't think anyone really cares that much on here, but Scotto told us one of his weakness and the cool thing for those of us who get what that means in Scotto's life. Change isnt looking all that hard now. Thanks Scotto for being great again! Cheers
And i have to say, suppy got on my nerves a little at first but now i find him absolutely hilarious and hes one of my faves. Great addition to the team. Gotta show love for supra... I mean suppy.
Make sure when you sharpen you’re tungsten the grind marks on the point are going down to the point and that’s how you will get you finest puddles most controlled
Suppy you’re not purging the stainless exhaust pipe with argon. This is how sugaring (porosity) happens. Cleaning everything with acetone will also make the welds look much better in the finished stage.
I only welded one semester in tenth grade back in 2002 and didn't pay attention. What does it mean to "back purge?" Also what do you mean "turn out sugary?" Like legit what do yous mean?
I only welded one semester in tenth grade back in 2002 and didn't pay attention. What does it mean to "back purge?" Also what do you mean "turn out sugary?" Like legit what do yous mean?
you only back purging when flow matters, or you don´t want some scraps from you´r welds to come loose. Like a intercooler piping and stuff like that. For a exhaust that dosent matter.
Hey, idea. Extend the break peddle on the merch truck to go around the steering column so you can right foot drive. Lol take one of those auto zone foot peddles turn it side ways and notch it out.
Not that you’ll hear it with the Big Block and I know Suppy did the wiggle check, but I feel like that exhaust piping is going to clatter like crazy inside that support member pass through pipe when underway.
I would have reinforced the cross brace exhaust passages. That engine might torque and sheer it. Best bet would be angle channel notch it at one end then 4 pieces for both sides. Then tie 2 inn to the bottom sides of the exhaust passages for added assurance.
tig welding is similar to gas welding in the process use your dominant hand for the filler rod and it will go easier especially if you you wont see your twenties again
Donk build is one of the best shows in Hoonigan, the nostalgia of early DT hits me so hard. Can't wait to see how it turns out. Much love from Puerto Rico
WEPAAA🇵🇷🇵🇷
Woooo🇵🇷
Suppy: complains about grinder guard kicking debris in his face.
Also Suppy: doesn’t wear safety glasses...ever. 😅
I think this technique is called "safety squints"
Suppy is playin dangerous games
He is a walking osha violation 🤣🍻
yes that man needs to wear at least something that will give him less of a chance of getting killed 😂
Remember that time Suppy got onto Dan about wearing gloves at a band saw, then in the next shot Suppy was wearing gloves at the band saw. Come on man
seems like that exhaust is going to be rattling a lot on that cross bar
Was the first thing I was worried about too. Had a new cross member put in my G8 when the trans was swapped. Rattled like no tomorrow and made me not want to drive the car about. in this case the motor will probably be plenty loud to drown it out, even at idle.
They might be able to use some sort of exhaust wrap as padding
Thats what I was supose to write.. That pipe will definitely hit that tube.. Nice job dudes.. But I I think you need to re make that part..
@@rx8tom There are like a thousand ways to fix this problem everyone seems so worried about, but yeah, exhaust wrap would fix it in like 10 minutes and as many dollars.
I'd put a strong hanger next to it
Suppy: that looks fine
Scotto: That looks good right
Suppy: that looks fine.
What do the lads have to do to impress him
Honesty is the best policy.
Impress him? I think at this point that is a bit of a lofty goal. Hoonigan is still working on not disappointing Suppy.
Be ninjas 🤣🤣
Suppy lowkey killed that dsc advert.
Show up. =D
Edit: Oh damn it, didn't have my glasses on. I read lads as ladies..
This "simple" Donk is going to be more capable than half the "street" cars in LA!
Lmao what do you expect it’s hoonigan not a backyard build
Sure but it takes 10x as long as well to build
Well when you have hoonigan money it's a given so....
L.a is full of fast ass cars lmao.
Yall will see when they put it up on This or That....It's going to be another heavy hitter. Did you see what they made the Hoonicorn capable of?! They aren't playing around!
When I was looking for something to watch and the Hoons drop a video. Hell yeah.
Because of Honnigan, Dan, Suppy I learned how to TIG weld a year ago I specialize in alloy wheel repair. The just send it attitude made me find something I actually love to do.
That exhaust is gonna bang the hell out of the crossmember! 😬😬
Ok I'm confused now. Does W.A.P. not stand for: Worship And Praise?
The wholesome version
@Mumboli Jumboli what's the link
@@maxxas5067 this dude is a spammer.
Pls help and report him.
Wholesome Auntie Philo
Suppy is the beast from the east. That man puts in work. You did a good job too scotto. Well done. I think I speak for all of us when I say this is one of the most entertaining builds yet.
Love Scotto calling for the shop Dad to check his welds. I can relate.
And being sad when he leaves
10:56 thank you I always put the bolts back and everyone always asks why or takes them out calling me stupid. I care and don't wanna lose them.
I do that a lot too. Even though i try to label and sort all the parts of a project i still forget which bolts go where, and this is the easiest way to prevent that.
Idk how they manage to milk so much with so little this whole episode was 1/4 of an exhaust and bringing it to the paint shop😂
Yeah well, that's why they charge by the hour
I know I’m late but most people want the longer content. Hate it when they skip the boring stuff
Suppy: “Safety first, kids.”
Also Suppy: no glasses 👓
He has natural safety glasses 😂
Yeah the no safety glasses is killing me. Also no masks as we enter another pandemic lockdown
*Osha watching Suppy complain about the grinder with the guard while not wearing a mask...
Osha: aight, Imma head out... 😂😂😂
My favorite part of the Donk is how hands on OG Donk Scotto is. Eager to learn. It's rad
Since I ever first saw a donk (on the Netflix show Fastest Car lmao) I immediately fell in love. Can't wait one day to build my own! Much love to y'all from Canada, keep up the killer work on that beauty.
More series' like this fellas! I know with everyone's schedules etc., this isn't always feasible but damn is it the BEST to see everyone at the shop into a project together.
The teaching and learning in this video makes me happy, thanks for sharing this!
Cant wait to see this thing done. Never thought id be so hyped to see a Donk build.
Hey Scotto if I see you having Volkswagen Audi troubles at that time we meet, remember this moment and if you get it just smile and expand that mind of yours like you just showed us!
Love this series. Need more just like it for slabs, mini trucks, and lifted trucks
This Donk is coming out great. Can't wait to see the final product. 👍😉
I just have to say, thank you all. For working so hard an love into all your content. On top of that when needed an thought of wearing masks. That in its self could help at least one more person to do so also, sounds silly and I'm rambling. Lol my bad.
Love peace and axle grease brothers ❤
No one on youtube has done all that spectacular of a job when it comes to filming welding, but it also serves to remember that the camera's sensor is attempting to see would typically blind someone. Welding is not an easy thing to film, but neither is filming inside or outside a car going 180mph. I'd love to see the film and fab teams collaborate on making a nice tripod adapter for a welders mask for the camera to "wear".
This is what Pimp My Ride should have been!
I really love that you guys use all the protective gear, I used to scream at the guys on American chopper for not wearing gear, secretly hoping the get zapped. I only say this because my welding instructor was put in a wheel chair for half a year when he accidentally backing into a live table.
Nice progress boys I'm really loving this project. Supy was such a solid addition to the crew.
So cool to see Scotto wrenching on cars. and its awesome that hes trying to learn how to weld!
Hey I don't think anyone really cares that much on here, but Scotto told us one of his weakness and the cool thing for those of us who get what that means in Scotto's life. Change isnt looking all that hard now. Thanks Scotto for being great again! Cheers
🤟🏼
And i have to say, suppy got on my nerves a little at first but now i find him absolutely hilarious and hes one of my faves. Great addition to the team. Gotta show love for supra... I mean suppy.
Can’t wait for this project to be finished and on the strip!!
A grinder and some paint makes you the welder you ain't.
You might need to bring in Jamo for the dollar shave advertisement.
Or just add him in the back as hype man 🤷♂️🤣
more positive outlook .... more positive outcomes.... come on team... we got this
That welding segment was gold. Yall just put hella people on game shout out the Fellas. That was great. 🙏🏾
"That's a lot of pipe" ... That can get added to the file "phrases I'll never hear again"
happy to see this project be finished
One of the most anticipated builds hoonigan has done
Make sure when you sharpen you’re tungsten the grind marks on the point are going down to the point and that’s how you will get you finest puddles most controlled
Suppy you’re not purging the stainless exhaust pipe with argon. This is how sugaring (porosity) happens. Cleaning everything with acetone will also make the welds look much better in the finished stage.
Scotto staying back after everyone has gone home .
The life of being the boss 👍
suppy is the biggest mood ever "not my problem" and "im leaving"
Suppy is as good a person as he is a mechanic, and he's an amazing mechanic 😍🥰👍
Suppy’s wielding skills are legendary 💯
Suppy such a great teacher. Needs full-time channel.
Things are getting better and better. Cant wait for the next episode.
If you are to do things right, back purge when welding stainless, it'll prevent cracking in the future
JUST SAW DAN SAVE EMALIA ON THE TRACK! Good job Dan 😌 your a great guy on and off camera 🤌🏻❤️
Suppy is a national treasure
So heartwarming to see Scotto asking his dad if he does okay
No cut outs, I love the way it sounds with open headers. Suppy please add some...
Isnt the exhaust gonna rattle like that ? Not that the car isn't loud af
If every advert could be this amusing I wouldn't skip them
That’s the goal.
"I'm gonna blame Suppy" well that's a shirt 🤣
Bin waiting for the update
that $ shave club advert was great. variety is key
I definitely feel scotto in wanting to learn. This was cool to watch, thanks for another vid.
man those hitmarkers really do never get old.
I didn't think i would like this build but i keep waiting for the new video post!!!
Hell yeah!
man it's great to see scotto fabbing shit up
Suppy is converting the Bolt-On-Bois to Fab Daddies.
Suppy killed that X pipe 🔥👌
I dont want wait till next week for a new video..I love watching
I feel like vins one of those people that can pull off any look
I love how suppy know he shouldn’t have said shitbox in the ad by looking at whoever in the back lol
"That's a lot of pipe" ... That can get added to the file "phrases I'll never hear again"
@13:45 when suppy is really displeased, 'that looks fine'
Next level table, now you need a next level chop saw. I got an evolution carbide blade saw, and don't miss the abrasive saw one bit.
“I should’ve went home when i had the chance” LMFAOAOOAOA😂😂
Hoonigan+lunch break= good day
Scotto putting some work in on this thing. Doing good man.
I always watch the whole ad that you guys do. Way too good😂 the way vin touches his face is hilarious 3:58
Any particular reason you're not back purging when welding that stainless tubing?
Those welds are gonna be sugary!
Was actually looking to see who else mentioned this in the comments
I only welded one semester in tenth grade back in 2002 and didn't pay attention. What does it mean to "back purge?" Also what do you mean "turn out sugary?"
Like legit what do yous mean?
I only welded one semester in tenth grade back in 2002 and didn't pay attention. What does it mean to "back purge?" Also what do you mean "turn out sugary?"
Like legit what do yous mean?
you only back purging when flow matters, or you don´t want some scraps from you´r welds to come loose. Like a intercooler piping and stuff like that. For a exhaust that dosent matter.
When you think 2020 couldn't get any weirder we get an episode where Scotto does most of the work?!? Everyone alright at Hoonigan? :D
Hey, idea. Extend the break peddle on the merch truck to go around the steering column so you can right foot drive. Lol take one of those auto zone foot peddles turn it side ways and notch it out.
That DSC ad was fantastic.
Waiting til Christmas?? I’ve been good all year!!
Those paint guys deserve a shout out at least for staying late and knocking it out.
I wish I had half the knowledge Suppy has. Suppy is a smart cookie
The dollar shave club ad definitely completed the video
Ya Vincenzo, you better take that back cuz suppy's the best, remember that!
Man so happy he finally got taught to TIG weld lmfao he was so excited for this
Suppy has skillz!! Salute to him
Suppy's tig wields are on point.
19:50 Fuel line still hangs :D
Supp supp think back 20 years. You ever imagine you’d be building project cars and hucking shaving kits? Hahah dope project.
Cant wait to see it painted and put together
Suppy will end up hating everyone on the shop when the Donk is done! 😂😂😂😂
Not that you’ll hear it with the Big Block and I know Suppy did the wiggle check, but I feel like that exhaust piping is going to clatter like crazy inside that support member pass through pipe when underway.
I would have reinforced the cross brace exhaust passages. That engine might torque and sheer it.
Best bet would be angle channel notch it at one end then 4 pieces for both sides. Then tie 2 inn to the bottom sides of the exhaust passages for added assurance.
I'm glad yall finally eased up on bleeping out the curse words. Reminds me of the earlier days.
nobody noticed Suppy straight up welding without a mask? hahahah
Suppy is the real worker
When this thing is all done it’s gonna be bad ass.
Yessss I’ve been waiting soooo long for this!!!!! Keep we coming boys!!!!!
Use a loud valve on cutout. As the boost comes up the valve opens. No getting hands burnt or wiring.
“Thats good right.... thats fine” 😂
Growing up in the south it was all about FLOW MASTERS but it must be just a southern thing because every where else people use Magnoflow
tig welding is similar to gas welding in the process use your dominant hand for the filler rod and it will go easier especially if you you wont see your twenties again
V-bands are the best thing ever!!!!
Hoonigans intro song should be "come with meee and you'll beee in a world of osha violations"