Esquire Eldred Wiring Mod
HTML-код
- Опубликовано: 5 окт 2024
- In this video we cover the Eldred Esquire cocked wah wiring mod - how to wire the Eldred Esquire setup from scratch.
The Eldred wiring mod is popular on Esquire guitars as it gives a little versatility from a single pickup guitar.
Esquire Eldred Mod Switch Controls:
Switch position #1. This rear position is the same as on a standard Esquire. The pickup goes through the volume control only, with the tone control bypassed for a hotter, louder lead sound with added highs.
Switch position #2. This middle position is also the same as on a standard Esquire, with the pickup going through both the volume and tone controls. It sounds a little warmer than position #1.
Switch position #3 In the front position of the Eldred Esquire wiring setup, the pickup goes through a single, small capacitor (0.0047uF) and the volume control, with the tone control once again bypassed. It removes the fixed treble roll-off network and replaces it with the 0.0047uF capacitor. This offers an extra dimension and more flexibility. Is is also known as the "cocked-wah" effect.
Components used:
2 x CTS 250k solid shaft pots
1 x CRL 3 way blade switch
1 x Switchcraft 1/4'' mono jack socket
1 x 0.047uF tone capacitor
1 x 0.0047uF capacitor
4ft cloth wire (2ft black, 2 ft yellow)
Equipment Used:
Hakko soldering station 888-D
Lead free silver solder
Links:
Wiring Diagram - sixstringsuppl...
Esquire wiring kit - sixstringsuppl...
Video Tutorials - • Guitar & Bass Wiring T...
Guitar wiring tutorials - sixstringsuppl...
Guitar & Bass Wiring Diagrams - sixstringsuppl...
Prewired Esquire Harness - sixstringsuppl...
Great instructional video. Just completed this mod on a old Squier Telecaster I had kicking around and followed your video. Made everything very simple.
Glad it helped!
a joy to watch...
thank you sir!
Thanks you for this step by step. I was having the hardest time wiring my esquire but I watched and copied you as you went and it came out exactly as I wanted. Thank you
I have already bought a tele 3 way and a strat 5 way off the guys excellently made I am now about to order one of these highly recommend (on its way)
Thanks a million. Your guide was perfect and so easy to follow. I now have my Eldred Esquire wiring sorted. 🤓
Very informative and professional. You should do a video on installing a 6 position freeway switch on a tele.
Estou fazendo uma maratona nos seus vídeos, são ótimos.
Aqui no Brasil não tem nenhum assim.
Ainda bem que encontrei você.
Thanks.
Keep your tip clean. Sage advice :P
haha word of the wise that is
Fantastic! Extremely helpful. Thank you.
Perhaps the most thorough Esquire wiring video that I’ve seen so far. Are there any changes you’d recommend if I plan on doing this with a Seymour Duncan Hot Rail?
This is an awesome little video. Thanks for sharing. I do have one question though. Would it be possible to use a gibson style 6 pole switch, so that this will work for a les paul junior (1 humbucker) or a melody maker (1 single coil)? I've just never been a fan of the fender style switches.
Thanks...........great video...........very helpful...........
Actually the 1st position bypasses the volume by going straight to the jack... at least my did until a recent catastrophic accident took place, knocking the 3-way switch out of whack. I had to unsolder everything to get it back in working order, only now I only have tone bypass and not the volume bypass but otherwise is back in the original Esquire fashion so I'm happy about that at least until I get another 3-way switch for my bypass to be as it was.
thanks, fluffed my lines during recording!
@@SixStringSupplies no problem!
I though the 1st bridge position bypassed the tone stack.NOT the volume. My question is regarding the capacitor is there a capacitor that would make the back or neck position more usable ?
Damn smoke ALWAYS aim right at ya!!!!
Just wondering how adding a small value cap is different from turning down your tone control knob a smidgen? I sae a Billy Gibbons clip where he does a basic 12 bar in that 3rd position that was just thick, beefy and down right mean. A better mod for me, would be how to get that 3rd position beef, without losing all the volume.
Thanks for a most helpful video , could you tell me how to to incorporate and wire in a push pull volume pot to coil tap a telecaster pick up with three wires, also is it possible to add a treble bleed to this circuit, many thanks, keep up the good work
Use of copper alligator clips helps with not cooking pots and caps during soldering.
I am about to purchase the Classic Vibe 60s Custom style Esquire. It is obvious that pos 3 will require the Eldred mod. Due the wiring is already in place is it factual to say that all that needs to be added is a .047 cap to the tone pot?
Is there any reason you couldn't just attach the pickup hot wire to the bottom lug on the volume pot so that it was closer to where the ground is attaching? It's all jumped together anyway.
Thanks for this great video! Please may I just check..... does position 1 bypass the volume with this wiring diagram? Many thanks.
I watched the video which was very well done and clear for a novice lie me. I'm not sure what the Eldred esquire is supposed to sound like over a standard wired Esquire? Does it deepen the tone? The actual purpose of the vitamin Q cap? A deepened tone would be what I'm shooting for! I like the Luther Perkins type sound. Thanks so much! Tom
Quick question I have one of these from you guys and installing it with a Seymour Duncan Jerry Donahue aptl 3 into an esquire is there anything I should be aware of
A 34 minute video for a 10 minute mod? WOW! 😂
I recently replaced the pups in my epiphone les Paul. With some dimarzio pups split coiled them at pushpull tone pots and I’m getting a wah effect I don’t want would changing cap value fix it
What's the purpose of connected 7, 8, and 1 to lug 4? And the jumpers from 5 to 3 and 6 to 2? Is that just out of redundancy as a failsafe? In reality you could just solder the pickup hot lead straight to the volume input lug and a lead to lug 4 of the switch, the lead from the tone pot to lug 2 of the switch, and the ungrounded lead of the .0047 µF eldred mod cap to lug 3.
Am I missing something else?
Woulda been kinda cool to hear what this was supposed to sound like… great tutorial though!
You soldered in a neck pup😮
The tone control in the middle position doesnt work. Connect the wiring like this in the video, just don't connect the capacitor (0.0047) in the first position. it must be because of that?.
i mean, in the second position have two volumens.
Only problem i have, the volume only turns down a slight amount...not all the way. Why would this happen?
Also, im using ceramic caps, if that matters..
50s please
Bro... you don’t need a ground wire between the pots on a tele. Why do you think they designed the control plate to be metal? Do the test with a multimeter in the continuity mode.
Bro... because it's a 100% effective best practice to follow ground to the last point, rather than hope your pots have good uncorroded contact with your beer soaked control cover. So yeah, you don't "need" to until you do
No sound demo? Boo! ☹️