Worked well for me: Issues about fitting: When u put ur inner tube in, try and pump it up less initially because the wider tyre is also quite a bit bigger so it can be a little hard to fit the tyre bead into the rim at first One really good method to fitting the tyre bead in was to lay the wheel flat on my lap and then do one side, and then flip and do the other side. Also when pumping, the upper bead might come out of the rim more than the lower half of bead. To avoid this, keep cheking it as u pump and then deflate it a bit and pump again, this time with the part of the bead thats coming out being near the ground. Gravity will help set the beads into the rim properly.
I have the same tires but on 559x18 rim. And 4.2 bar pressure. For almost 5 years it works great on trail. Frame: Magellan Tucana 05/ Fork: Suntour XCM V3.
the maxxis hookworm is classified as a street and urban tires,high rolling less resistance but a bit heavy, i was using these tires 10years ago and im aiming to buy a set of it again very soon,kenda kiniption is also a very good street tires.but very hard to come by this days
When I first tried putting them on today I was all fucked up lookin at the rim and the tire thinking the rim was too small. I put these on my mtb. Now after pedaling for a hour. If anyone finds these looking for a mtb. I have a 29er. I couldn’t describe to anyone how quiet these things are compared to the knobbies I had gotten with the bike. These are the way.
The issue with putting wider ties on say 19mn rims is it makes the tire light bulb shaped making you have to lean further into the turn to get the Side knobs to engage. And if you put a say 29.25 on a 35mm rim. The tire won't be rounded enough causing the tire to be flat across the treed pattern making the side knobs Engage way too soon in a turn. If you look online you can find tire size charts that show the range of sizes that are best for Any particular rim size. Meaning the inner width of course. I hope that helps. However if there's slicks it really shouldn't matter. At least when it comes to a bigger tire on a finner rim. But if you put a thin slick on a wide rim you're gonna end up with a Is square tire. That's gonna increase the rolling speed of the slick. Basically defeating the purpose of putting slicks on your bike.
I have a 29er with rims that are 20.5mm internal width. I had no idea about technical stuff and I bought and had installed Hookworms which are 29 x 2.5. I had no problems whatsoever. Worked fine. These are technically too wide for these rims but I had no issues. What do you think of 2.35 wide 27 inch tires on a rim that has a 21mm width? Thanks
Hey! tysm for the vid. I have a PROBLEM. I have a redline mx 24 and the rims are Alloy Race 24 x 1.75, 36h. I think the rims are too narrow, i searched up the rim and couldn't find it. I want to see the(mm) of my rim. Can u pls help asap? if they dont fit i have no money so ill have to return the tires and keep racing tires.
Waiting on mine to come in….I’m using them on my stealth bomber E-bike…it’s a road bike, and the 2.5 width….will be a big improvement….my tire with the motor is 2.1….I worry about my front it’s 1.95. I installed bigger tires on narrow rims before….so I’m not worried, I got a Innertube strip, and a heavy duty self sealing tube….so I won’t have to change the rear tire for awhile….on a e-bike it’s a bit harder to change. The old tires were only 1.95, and Noisy….My bike does 60mph top speed, hopefully it gives me another 1 or 2 MPH. Using 27.5 rims on a stealth bomber frame looks weird with narrow tires, and my rear tube got a flat.
Tire folds over on turns. I've been running a 17mm inner diameter rim with a 2.25 wide tire for 8 years on my mountain bike. It works. Not ideal. Would prefer a 25mm inner rim width for better cornering ability. I currently square off the corner to hustle through quick. Not ideal but it's a work around. 2013 Scott Spark 960 hardtail mountain bike.
Think these will hold up on a gas bike doing around 40mph? I keep on hearing people talk about these and I had a set on my ebike but it only did 30-32mph
Hi I have a 29 Framed BMX the tires that come on it are 2in wide do you know if the Maxxis 2.5 would work om those wheels? I already measured the frame and fork and have room . Thanks im advance
dude noob question here, i have a frame that has 2.3" max tire, im thinking of setting 2.20" on a wide 30mm rim. Will it work well or i change to narrow tire 21mm instead? thanks
Nope thought the same thing would pop off rim . have a hybrid with 700c rims, mounted 29x2.0 knobbys to ride on off road trails. Even had fatter 29 road tires no problems whatsoever
My mountain rim has 19mm inner width , what tyre sizes can fit on it (i want to fit thin tyre than what it have), now it has 26×1.95 tyre. Pls reply me...
Michelin C4 are great, they are compatible with 1.45” to 2.6” tires. Check: www.chainreactioncycles.com/mobile/michelin-c4-airstop-butyl-mtb-bike-tube/rp-prod58752
Sure, I’ll try and make a video on narrow wheels in the future. The tires didn’t touch the forks and frame, they are still rideable on narrow wheels but I wouldn’t recommend it, there’s too much flexing on the sides and will lead to bad traction and corner stability.
@@DanyoSports Thank you for the quick reply... Well, the bad traction that associates with it is not really my concern. I’m not a free rider like some of you guys and the last time I’ve done stomp jumping was 40 years ago LOL. Besides the Hookworm threads are symmetrically rounded and my rims have deep butted lips or walls because it’s designed for caliper brakes (old mavic aero rims for mtb), so I think it could hold on to mild cornering without popping out or rebounding. I’m only curious about the profile that will increase if you usually install wide tires to narrow wheels and then there is this big discount sale on hookworms that is hard to resist.
@@DanyoSports Thanks! Its just... I’m having some heebie jeebies staring at those tires, because I know what an actual hookworm (parasite) looks like under the microscope. They’re spot-on naming that tire! Lol!
Just curious. I have a foldable bike(java zelo) and im using 20 x 1.50 but im thinking to upgrade it to 20 x 1.75 or 20 x 2.00. Am i going to face a problem if i ungraded the tyre and can Anyone can tell me what would be the problem or any advise. Because if there is a problem in using 2.00 i will just stick to my 1.50. And some random question. If i change the tyre, should I change the inner rubber too?
Measure the frame and check if your have enough space for 2” tires, I wouldn’t go too wide because the wheels are small and that would increase rolling resistance.
I’m struggling to find out if some 27.5x 2.5 hookworms will fit my bike, I have 1.95 tires on right now. Some people tell me it won’t fit some ppl tell me it will. I don’t know what to do to find out Can someone help me find out if 2.5 wide tires fit my rims.
Make SURE the tire is seated properly around the valve stem before pumping! It might look like it is, but CHECK. Cost me a tube. Sounded like a 50 cal going off.
I'm currently on kenda small block 8 on my 26' and they are pretty worn out rn so I need to replace them. i was searching for a set of tires to use at city and road and I want something that I could do speeding with them are hookworm good for me?
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
I currently use this and it's super fun in the streets. Good slicks if you want to convert your MTB for urban use.
Yes, they are great.
Kakalagay ko lang po kanina😅
@@serjhunmotoserye5640 26" x 2.5" tapos malapad po rims ko.
@@serjhunmotoserye5640 pwede po ata
Pwede kaya ito sa stock rims ko, 19mm lang lang inner width. Medyo luma na yung bike, pero working well pa naman, kaya ayaw ko pa magpalit ng rimset 😅
Worked well for me:
Issues about fitting:
When u put ur inner tube in, try and pump it up less initially because the wider tyre is also quite a bit bigger so it can be a little hard to fit the tyre bead into the rim at first
One really good method to fitting the tyre bead in was to lay the wheel flat on my lap and then do one side, and then flip and do the other side.
Also when pumping, the upper bead might come out of the rim more than the lower half of bead. To avoid this, keep cheking it as u pump and then deflate it a bit and pump again, this time with the part of the bead thats coming out being near the ground. Gravity will help set the beads into the rim properly.
I have the same tires but on 559x18 rim. And 4.2 bar pressure. For almost 5 years it works great on trail. Frame: Magellan Tucana 05/ Fork: Suntour XCM V3.
the maxxis hookworm is classified as a street and urban tires,high rolling less resistance but a bit heavy, i was using these tires 10years ago and im aiming to buy a set of it again very soon,kenda kiniption is also a very good street tires.but very hard to come by this days
I put 26"x4.0 fattbike tires on 26"x1.9 rim. 😁 And I tried 26"x1.9 tires on 4.00 wide fatbike rims. Both ways worked great.
Didn’t think that would work
@@jasweb147 It Works :)
Could I put a 2.8” wide tire on a standard Walmart MTB rim? They have 2.10 wide tires. Can’t get an answer anywhere 😢
@@Goldenhammer8 If you have space between forks... No problem.
Thank you bro. 🙏
When I first tried putting them on today I was all fucked up lookin at the rim and the tire thinking the rim was too small. I put these on my mtb. Now after pedaling for a hour. If anyone finds these looking for a mtb. I have a 29er. I couldn’t describe to anyone how quiet these things are compared to the knobbies I had gotten with the bike. These are the way.
The issue with putting wider ties on say 19mn rims is it makes the tire light bulb shaped making you have to lean further into the turn to get the Side knobs to engage. And if you put a say 29.25 on a 35mm rim. The tire won't be rounded enough causing the tire to be flat across the treed pattern making the side knobs Engage way too soon in a turn. If you look online you can find tire size charts that show the range of sizes that are best for Any particular rim size. Meaning the inner width of course. I hope that helps.
However if there's slicks it really shouldn't matter. At least when it comes to a bigger tire on a finner rim. But if you put a thin slick on a wide rim you're gonna end up with a Is square tire. That's gonna increase the rolling speed of the slick. Basically defeating the purpose of putting slicks on your bike.
Did you try riding the 2.5” tires on the 16 mm rim? Did it ride ok or was there problems?
I have a 29er with rims that are 20.5mm internal width. I had no idea about technical stuff and I bought and had installed Hookworms which are 29 x 2.5. I had no problems whatsoever. Worked fine. These are technically too wide for these rims but I had no issues.
What do you think of 2.35 wide 27 inch tires on a rim that has a 21mm width? Thanks
itll be fine i think, i have 24mm wide rims with 2.3 tires and it fits very good
Good to know, I was using Schwalbe Big Apples which at 2.35 wide, but I wanted to get these, wasn't sure if I was pushing it
Hey! tysm for the vid. I have a PROBLEM. I have a redline mx 24 and the rims are Alloy Race 24 x 1.75, 36h. I think the rims are too narrow, i searched up the rim and couldn't find it. I want to see the(mm) of my rim. Can u pls help asap? if they dont fit i have no money so ill have to return the tires and keep racing tires.
Hi, 1.75” is 44.45mm so the tires would fit on your rims without any issues.
Maybe check again on that too narrow rim myth haha
www.renehersecycles.com/myth-18-wide-tires-need-wide-rims/
Waiting on mine to come in….I’m using them on my stealth bomber E-bike…it’s a road bike, and the 2.5 width….will be a big improvement….my tire with the motor is 2.1….I worry about my front it’s 1.95.
I installed bigger tires on narrow rims before….so I’m not worried, I got a Innertube strip, and a heavy duty self sealing tube….so I won’t have to change the rear tire for awhile….on a e-bike it’s a bit harder to change.
The old tires were only 1.95, and Noisy….My bike does 60mph top speed, hopefully it gives me another 1 or 2 MPH.
Using 27.5 rims on a stealth bomber frame looks weird with narrow tires, and my rear tube got a flat.
This is my rim, what do u prefer the max tyre width for it? 2.3/2.4?
Rim width: 406---inner 16.5mm outer 22mm
16.5mm is not wide, you can still put 2.3” tires but 2.0” is more preferable.
@@DanyoSports Thanks.. How about 2.1?
Yes, it should be fine.
What happens if the rim is too narrow?
Tire folds over on turns.
I've been running a 17mm inner diameter rim with a 2.25 wide tire for 8 years on my mountain bike. It works. Not ideal.
Would prefer a 25mm inner rim width for better cornering ability.
I currently square off the corner to hustle through quick.
Not ideal but it's a work around.
2013 Scott Spark 960 hardtail mountain bike.
j'ai un question svp Est ce que les pneu maxxis hokwroom tubelesse ready
Would this be OK for 26" rims w/ 27mm inside dimension on a Townie Electra that came stock with 26 X 2.35 Schwalbe "Fat Frank" beach cruiser tires?
@DanyoSports what is the inner width of your "narrow" rims?
The inner width is 16mm.
Think these will hold up on a gas bike doing around 40mph? I keep on hearing people talk about these and I had a set on my ebike but it only did 30-32mph
should be fine, i've done faster on sketchier tires
Easy
@@ianmangham4570 I have them on my 80cc now and they're amazing!! Only tires I'll get from now on
i have 27.5 frame and dual fork/crown my rim size is 26er(wide rim 40mm)?? what do you think?
Hi I have a 20mm rim would you say I could fit a 2.5 inch tire on it
Hi, if your inner width is 20mm, you could only fit tires up to 2.1”. You need 25mm or wider to fit 2.5” tires properly.
Hi am i able to put 2.4 thick slicks on a specialized 2.35 and 25mm rims
Hi, yes, 2.4” tires fit.
would a 27.5 x2.50 fit on a 27.5 x2.10
The rim should fit but you need to also measure your frame for tire clearance.
My bikes back wheels is like a road bike can i inceess the tire size on it you think as the rim is thin
I have an ebike with 26 x 3 tires would 26x2.4 work well?
Hi I have a 29 Framed BMX the tires that come on it are 2in wide do you know if the Maxxis 2.5 would work om those wheels? I already measured the frame and fork and have room . Thanks im advance
Hi, yes, the wheels should also fit these tires.
@@DanyoSports Thanks bro
dude noob question here, i have a frame that has 2.3" max tire, im thinking of setting 2.20" on a wide 30mm rim. Will it work well or i change to narrow tire 21mm instead? thanks
It shouldn’t be a problem, I rode 32mm rims with 2.4” tires on my Trek Fuel and they worked very well.
@@DanyoSports thats good news! thanks man!🤘🤘🤘
@@DanyoSports yea i got them on my alpinestars 26er but whats the best tube
@@SpACeCruizeR2o3 Michelin ProTek
Nope thought the same thing would pop off rim . have a hybrid with 700c rims, mounted 29x2.0 knobbys to ride on off road trails. Even had fatter 29 road tires no problems whatsoever
Thanks for the ifno
What tyre will be best in bigeest for my 1.75 rim?????
Please answer... Thank you....
Is the outside diameter 1.75”? I guess your rims are good for tires up to 2.6”.
@@DanyoSports oh... Didn't know that i can fit 2.6
Thanks man.....
hey Can I fit a 26 x 2.35 on my mavic x223 with inner width of 17mm?
Hi, no, 17mm is very narrow and can only fit tires up to 2”.
My mountain rim has 19mm inner width , what tyre sizes can fit on it (i want to fit thin tyre than what it have), now it has 26×1.95 tyre. Pls reply me...
could i fit the 29 inch tires on 23mm width rims, On the trek marlin 8
Yes, it’s compatible.
Did you use a different inner tube?
I used tubes for 2.5” tires.
Hi I have 23mm internal rims, i want to put tyre 2.4 continental trail king
So my tire size on my bike is a 26x1.95 when i got the bike so would a 29x2.5 work?
It depends on the frame, use a ruler or measuring tape to see how much space you have before buying these tires.
@@DanyoSports do u think a 26x2.50 would work but just get the right tube size
How wide are the wheels? The tires would fit but if your wheels are too narrow, the top of the tires would become floppy and result in poor cornering.
@@DanyoSports what would best tube size because when i search up 26x2.50 bike tube it always show other numbers on the tube package
Michelin C4 are great, they are compatible with 1.45” to 2.6” tires.
Check: www.chainreactioncycles.com/mobile/michelin-c4-airstop-butyl-mtb-bike-tube/rp-prod58752
Hi , My rim internal width is 20mm , can I use 2.4” tyre? Pls advice , thanks
Why you did not try the narrow wheels and lets see how it goes? Does it touch the bike frame or the fork bars?
Sure, I’ll try and make a video on narrow wheels in the future.
The tires didn’t touch the forks and frame, they are still rideable on narrow wheels but I wouldn’t recommend it, there’s too much flexing on the sides and will lead to bad traction and corner stability.
@@DanyoSports Thank you for the quick reply... Well, the bad traction that associates with it is not really my concern. I’m not a free rider like some of you guys and the last time I’ve done stomp jumping was 40 years ago LOL. Besides the Hookworm threads are symmetrically rounded and my rims have deep butted lips or walls because it’s designed for caliper brakes (old mavic aero rims for mtb), so I think it could hold on to mild cornering without popping out or rebounding. I’m only curious about the profile that will increase if you usually install wide tires to narrow wheels and then there is this big discount sale on hookworms that is hard to resist.
Yeah, grab them and you won’t be disappointed.
@@DanyoSports Thanks! Its just... I’m having some heebie jeebies staring at those tires, because I know what an actual hookworm (parasite) looks like under the microscope. They’re spot-on naming that tire! Lol!
Sick rear wheel
I'm gonna use maxxis dth 26x2.3 on a 20mm rin. Would it work correctly? Thanks for your answer.
20mm is narrow, you could fit it in but I wouldn’t recommend it.
I wouldn’t put anything higher than 2.1”.
@@DanyoSports Thanx for the info
I have a stock 2021 om duro. Will these fit on the stock rim?
Hi, what's the brand of the rim you use for the vid? The camo one. Thanks
Hi, those are Sun Ringle Rhyno Lite.
Just curious. I have a foldable bike(java zelo) and im using 20 x 1.50 but im thinking to upgrade it to 20 x 1.75 or 20 x 2.00. Am i going to face a problem if i ungraded the tyre and can Anyone can tell me what would be the problem or any advise. Because if there is a problem in using 2.00 i will just stick to my 1.50. And some random question. If i change the tyre, should I change the inner rubber too?
Measure the frame and check if your have enough space for 2” tires, I wouldn’t go too wide because the wheels are small and that would increase rolling resistance.
Would a 29x2.50 tire fit on a 29x2.25 wheel
Of course
@@ianmangham4570 thanks
Thank u for the vid
Can I put 2.4/2.5 tire on my 19mm inner width rim ant outer 25mm. Actually I have 2.35 on fabric bike
No
2.35 is the max
So what was the conclusion for the narrow rim? Does the tire be wobbly?
Having wide tires on narrow rims will lead to bad traction and corner stability.
But the tyres won't fall off right?
@@habzzz nope
@@smileyguyz Thanks. Found out myself, had these on now for ages and they're brilliant! Alot of fun in the wet and snow tho 🤣
hi,my tires are now 26x2.1 now. can i change it to 26x 2.3 and will not have a problem when i go to trail?
Hi, what bike do you have? Measure your frame to see if it’s going to fit. The 2.3” tires will give you better grip and improved stability.
Do u know if they got any turn direction or can fit eighter way?
No turn direction but the logos (Hookworm/Maxxis) should be on the drive side.
@@DanyoSports what do u mean by drive side Isit where the chain and flywheel side?
Yes, exactly.
Hi I have a question so I have a Haro sloride that runs 29x2.2 would it be a problem if I went up to a 29x2.5 on the same rims?
Hi, you should be good, but make sure you measure your frame and fork for tire clearance.
@@DanyoSports yah I did that it’s good I was jus making sure that tire size should be good for that rim thank you!
Man can you tell me what's your rim please? I want that camouflage
What size rim did you use?
It’s 26” x 29.2mm (inner width).
I got a 2.30 to 2.75 bike tube, would the maxxis hookworms fit on my 2019 blocks flyer? I have the original bike rims and they are narrow
The maxxis tires are 26 x 2.5 but u already know
Yes, the bike and the tube would fit.
Can i fit 29x2.2 on a 20mm rims?
It can work correctly without any downsides?
Yes, 2.2” is fine.
what would happen if i put it in a rim size 599x17 ?
I’m struggling to find out if some 27.5x 2.5 hookworms will fit my bike, I have 1.95 tires on right now. Some people tell me it won’t fit some ppl tell me it will. I don’t know what to do to find out
Can someone help me find out if 2.5 wide tires fit my rims.
hi!!! is this good for climbing in highway?
Can these fit on a 1.75 rim and can u link where u got the tire from
Yes, the tires will fit on your rims, I bought them from Amazon: www.amazon.ca/dp/B000A8NQQC/ref=cm_sw_em_r_mt_dp_6NVP0XQVGVXTNN4H4JGY
Make SURE the tire is seated properly around the valve stem before pumping! It might look like it is, but CHECK. Cost me a tube. Sounded like a 50 cal going off.
Hi, i have 26er frame.. can i fix 26x2.5 tire on it?
Hi, you need to measure your frame and inner width of the rim.
I have 58mm rims could it fit 4 inch tyres
Yes, 4" tires fit on fat bike rims.
Hi, can a 18mm rim safely take a 26x2.3 tire?
Hi, no, 18mm is not suggested.
Hi mate ! How do you think about the grip ?
Hi, the grip is great, I love them.
I have a 27.5x 2.8 tire but I have a narrow rim. Will it fit ? Can it cause a problem on my rim
?
No it wont cause a problem go for it
Would this fit a throne goon xl my bike has 27.5 x3.0 tires on it currently
No unfortunately, they only make 20”, 26” and 29” of this model.
i have a 26in x 1.95 and I want to put 26inch x 2.35 do u think they will fit?
What bike do you have? You need to measure your frame.
@@DanyoSports i have a mtb how do measure the frame
Measure your fork and rear triangle and check if you have enough space for 2.35” tires.
@@DanyoSports thank u bro
I have 19mm inner width rim and thinking of use 2.20 wide tires
Anyway its a 26er.. if its ok bro?
Yes, that’s fine.
If my current stock tire is 29 x 2.10 should I get this the same?
How wide is your rim? You can go a little wider.
@@DanyoSports how do I find out the width
You have to take out the tire and tube and measure the inner width with a ruler.
I'm currently on kenda small block 8 on my 26' and they are pretty worn out rn so I need to replace them. i was searching for a set of tires to use at city and road and I want something that I could do speeding with them are hookworm good for me?
Yes, they are urban tires, they roll faster and smoother than mountain tires.
i have raleigh[MTB] current is 26 x1.95 rim and tyre. i want to convert in plus bike by installing 26x3 . is it possible ?
No, I don’t think your frame will fit 3” tires, but measure your frame and fork to see how much clearance you have.
Sure btw thanks bud!
Idk I fit a 26x4.0 tire on my 26.2.125 rim
I have 26", 27mm rim u think it good?
My tyres came 2.00 inches I'm not sure how wide the rim is. Do you know how wide I can go with my tyres?
You’ll have to measure the rim, I don’t know what bike and wheels you have.
It also says 584 x 19c 27.5 if that helps
Your inner width of the rim is 19mm and it’s good for 1.8”-2” tires. You can fit up to 2.5” tires but it’s not recommended.
So would somwhere from 2.25 to 2.3 would be alright?
A little over is alright, 2.2”-2.3” should be fine.
21mm width rims can fit 26x2.3 ?
Yes, they are good up to 2.3” tires.
@@DanyoSports Thanks!
So my bike came with 26x2.00 tires, will 26x2.50 fit?
What bike do you have? You need to measure your frame and fork for clearances.
DanyoSports I have a SE Blocks Flyer, between frames and forks it has around 4.25 inches of clearance
Nice bike, they should fit fine.
DanyoSports alrighty, thank you!
Hello sir, I want to ask I am planning to buy 26 X 3.00 tire will it fit in 26 x 2.45 Rims ???
Yes, it will fit.
@@DanyoSports Thank you
@@DanyoSports please reply !!!!! *Can 26x 2.35 or 26x2.10 fit in 26x2.125 tyres* ????? Please reply!!!!
Measure your frame and check for clearance.
What's the inner diameter of your rim? 19mm? 20mm?
The inner diameter is 21mm.
@@DanyoSports you have like 3 replies to different comments saying different internal width measurements.
My tyres i want is 63-584 and my rim is 584-19c is it work
19mm is narrow, I wouldn't put 2.6" tires on it.
will a 2.8" tire fit a 23mm?
It’s not recommended, anything more than 2.6” is not suggested.
How's the grip on wet?
I haven’t tried it on wet condition.
where can I find wide 26 inch wheel
Nice man!
Can i put a 2.5 hookworm on a 2.2 rim
What size was the first rim?
They are 26” x 23mm.
Would a 2.6 tire fit ona 2.25 rim?
Yes, it would fit well with 2.6” tire.
hola una pregunta donde compraste las maxxis hookworm? saludos desde Argentina
Hi, I bought the tires from Amazon, but you could also get them from JensonUSA: www.jensonusa.com/Maxxis-Hookworm-Wire-Bead-Tire
@@DanyoSports Hi, I'm from Argentina, Buenos Aires and I want to buy the Maxxis Hookworm covers. Do you ship to Argentina?
Hi, unfortunately, I don’t sell bike parts but you could buy these tires easily from JensonUSA, their prices are competitive and they ship worldwide.
@@DanyoSports Hi, but I was telling you about the quarantine issue that I don't know if they ship worldwide. where are you from?
Hi, I’m from Canada.
Hello, I just want to ask I'm planning to buy 27 x 2.35 tire will it fit in 27 x 1.95 rims??
Thank you
Hi, yes, the tires will fit.
can i use this tyre on 26×2.1 rim
Yes, it will fit.
Boss pwede ba ang 3.0 sa narrow o need mgpalit ng wider rim tanks...
Good tires, bit heavy tho..
Isn't it slippery while turning?
No, the tires are great on dry surfaces.
How wide was the rims
The inner width is 29.2mm.
@@DanyoSports thanks
And I'm loosing my mind deciding to put a 32mm tire on a 15mm rim lol
How about 2.3 tyre on 19 mm rim
how narrow your rims are?
Gotta hate fish eye cameras :D
The frame can't fit the tire lol
You didn't even test it or anything. Should've made a few runs, tried to take corners, have a timed challenge or two.
My old tires read 26x1.50 can 26x2.125 be comparable?
Yes, make sure the inner width of the rim is at least 20mm.
Dt swiss ex471 rim, 25 inner, 30 outer. Is it matchable with this tire?
Is it?