How To Size A Ring Down
HTML-код
- Опубликовано: 30 окт 2015
- Recommended Tools & Supplies:
Safety Glasses;
Ring Gauge;
Dividers (3 inch);
Ring Mandrel;
Saw Frame & Blades;
Half Round File (2 Cut);
Pliers Set;
Electronic Digital Caliper;
Ring Clamp;
Rawhide Mallet;
Solder Assortment;
Solder Cutting Pliers;
Small Storage Containers;
Paint Brushes;
Flux;
Third Hand;
Charcoal Block;
Kiln Shelf;
Lazy Susan Base;
Butane Torch; and,
Butane Refills
Purchases made using the Amazon links on the OJA website at: www.onlinejewelryacademy.com, help to financially support the OJA. On our website you'll also find links to products from Durston Tools that we have reviewed. Or, you can access Durston's website at durston.com/oja.
In this video, Professor John Ahr of the Online Jewelry Academy demonstrates how to reduce the size of a ring using basic soldering techniques.
Even if you aren't looking to make a living from preforming repairs, it may be necessary for you to correct the size of a ring. This video covers the basic steps of the sizing down process and provides you with the rules for ring sizing. In a related video, Professor Ahr demonstrates how to size a ring up to increase its size.
If you like this video there are many more like it included in the Online Jewelry Academy's playlist. You can find the OJA's videos organized by category on our website at: www.onlinejewelryacademy.com.
Subscribers to the OJA's RUclips channel have the option to receive regular notification of new OJA video releases. So, why not subscribe now? Be sure to click on the bell next to the subscribe button to turn on notifications.
The OJA offers complete courses on Udemy.com.
1. Beginners course "Colorful Silver Jewelry"
www.udemy.com/makingjewelry/?...
2. Intermediate course "Making Beautiful Articulated Hinged Jewelry"
www.udemy.com/articulatedhing...
3. Stone Setting Course "5 Ways To Enhance Jewelry Design Through Stone Setting"
www.udemy.com/stonesetting/?c...
Follow us on:
Instagram - / onlinejewelryacademy
And, you can support the production of future OJA videos by making a monthly contribution at: / onlinejewelryacademy .
one of the best and most detailed videos .. you went over any possible obstacles and how to resolve them also. thank you!
Hi Allen, Thank you for the positive feedback. I'm glad that you enjoyed the video.
Thanks for your support! : )
John, thank you for posting these videos. They have been immensely helpful. Especially showing (and naming) the tools you need for each job.
+Kufunklefec
I'm so glad that you are finding the videos helpful. Good luck with your projects.
Thanks for your support! : )
I'm posting on hubby's account. Second time watching this. Thanks for posting! I'm spending the evening attempting to size down broken Sterling settings. I can solder heads to shanks, but this is giving me trouble. Practice, practice! :)
Yes, practice makes perfect. Glad you found the video helpful.
Thanks for your support! : )
You are a great teacher. Thanks for the awesome video.
Once again, excellent teaching! A breath of FRESH AIR!!!
+Gabby Flying Chef
I'm glad that you enjoyed the lesson Gabby. I hope that you learned a lot about the process of sizing down a ring.
Thanks for watching! And, thanks for being a loyal viewer. : )
Thank you so much Mr. Ahr!
+Valerie “Osunwele” Tate
You're very welcome Valerie. I'm glad that you enjoyed the video. Be sure to check out all of the videos on the OJA playlist at www.onlinejewelryacademy.com
Thanks for watching! : )
Thanks for sharing this with us.
Hi Marty, I'm glad that you enjoyed the video.
Thanks for your support! : )
Great teacher. Thank u
präzise und methodische Arbeit ,sehr gut!!!
Danke 😀
Another great video.
Glad you enjoyed the video. Thanks for watching! 😀
Thank you for the great video
Glad you enjoyed the video. Thanks for watching!😀
I enjoyed the video but would love to see how you size a ring up. thank you!!
+Jayme Witcher
Guess what Jayme! We are going to release a sizing up video very soon. Hang in there just a little longer.
Thanks for watching! : )
Thanks for the very informative tutorial, can you solider 925 silver? with flux and solder and a propane torch? I have a ring that’s 924 or 925 silver that I need to size down. Just wondering if it can be done? Thank you!
Hi Pablo! The short answer is yes. Here’s a link that provides more details: contenti.com/resources/gas-melt-temperature
Good luck with your project! 🍀
I know that regular solder isn't suitable for this , so where might one find the proper solder?
Thanks for the video.
You can purchase silver solder from most online jewelry supply companies.
Thanks for your support! : )
If the ring will be sized down, will the grams of the ring decrease also? or can the jeweler add the remaining unto the ring?
If you want to keep the weight constant, you’d probably want to just scrap the ring and make a new one. The metal could be refined and cast into a new one.
Nice technique sir. Sir can it be done on 9.25 starling silver with solitaire AD stones or any other imitation ring? Or this flame process will ruin the total ring if it's not pure silver?
The ring needs to be sterling silver or gold. If there are stones in the ring, they need to be removed first.
@@OnlineJewelryAcademy I mean the rings that are available online which is not pure silver but imitation of diamond ring can it go under flame treatment to resize down?
Check the seller’s website for the material content of the ring. Or contact them with your questions. I cannot confirm that the process will work on a ring that I am not familiar with. Good luck 🍀
Can you stretch a ring a bit that already been downsized once? Or Will it crack
You should be able to stretch a ring band that has been sized down. Remember, soldering takes the temperature of the ring beyond an annealing temperature. Just remember that it's not a good idea to stretch a ring with a stone(s) in it. : )
great video!
what happens to the little bit of gold left over?
Hi Garrianne, The little piece of metal removed from a ring should be placed in your scrap container and saved for a time when you turn in scrap for refining.
Thanks for your support! : )
OnlineJewelryAcademy If doing it for a client, do they ever request it back? Just curious. I doubt the bit removed would be anything particularly super significant regardless of material. But I can imagine some stingy person wanting that tiny bit of gold back, if it's gold, etc.
When sizing a ring down you use bow pliers to keep ring round plus you your joint needs a dove tail cut to get a good solder joint or a 45 angle cut on shank of ring otherwise ring might pull apart. You also need to use flux and denatured alcohol in the process and a pickling solution to clean ring. Otherwise you will polish to much gold of ring in the process.
I disagree with you Ana. First, beau bending pliers are too aggressive and can deform the ring more than is necessary. Half round pliers are a better choice in my opinion. A 45 degree angle or dovetail joint is complete overkill on the ring. A butt joint will work just fine. A joint like you recommend is really only necessary in metalsmithing work where you will hammer on top of the joint. Whether you are working in gold or silver, proper pickling and cleaning is necessary. Otherwise you might be too aggressive with your removal of flux glass and oxides. There are many successful ways to work in metal. The OJA strives to provide those learning the craft with simple solutions.
Thanks for your support! : )
I have a beautiful ring but its tight and i want to enlarge it a little. How do i go about it DIY
Hi Justina, I can't teach you in the comments section how to enlarge a ring that I've never seen. My best advice would be to show your ring to an experienced jeweler in your area. He/She will help you to determine if it's a project that you can handle. If not, I'm certain that they would be happy to help you enlarge the ring for a small fee. Good luck.
Thanks for your support! : )
I have a wedding ring made with steel and rose gold. It's too big for my finger, it is possible to down size it?
It's not possible for me to determine if the ring can be sized without seeing it. I recommend that you take it to an experienced jeweler who has experience working with that type of jewelry.
Thanks for your support! : )
If I was to resize my girlfriend engagement ring smaller from a size M to K would the platinum ring be soldered by lead solder as as used in plumbing?
Hi Jonathan, First, congratulations on your engagement. But, the fastest way to loose that wonderful woman would be to destroy her engagement ring. Take it to a jeweler who works with platinum. Platinum isn't soldered. It's welded at very high temperatures. Plus, jewelry should never contain any lead. Remember, happy wife... happy life.
Thanks for your support! : )
OnlineJewelryAcademy Thanks for the reply. I've booked it into Laser Surgery for Jewellery in Hatton Garden London today so hopefully it's amended professionally and correctly. Thanks again.
What will happen to the remaining piece of the ring that was cut? Will it be returned to the client?
Yes, the metal should be returned to the client. Or the value of the metal could be applied toward the cost of the repair.
@@OnlineJewelryAcademy thanks this helped my understanding a lot 🙏😁👏😇
I wear copper. Not all the time, but I still do. :)
+captainjerk
Copper is wearable. But, you cannot wear it for extended periods without it turning your skin green. Plus, you should never wear it through a piercing. I recommend that if you want to wear your copper jewelry without it turning your skin green, coat the inside with a clear acrylic nail polish.
Thanks for watching! : )
When a ring is downsized and gold is removed, I assume it is returned to the customer since they paid for it. Is that the case?
Yes. The metal removed should be returned to the client. 🙂
When sizing a band don't take a piece out, Anil the ring then compress the band. If you have a ring that has gemstones then the steps are correct.
Compression can only work for a small adjustment. If the ring needs to be sized down more than a half size you'll need to cut it. Glad you approve of the video otherwise.
Thanks for your support! : )
The thought of leaving a wedding ring and band with that high value and not worrying about them switching your diamonds for cheaper ones, thinner ones with metal underneath or a cubic zirconium for the smaller accent diamonds concerns me
I agree, it is something to think about before you leave valuables for repairs. : )
:( am watching this while trying to resize a copper ring 4:46
If you love your copper ring and want to wear it, go for it. But, I recommend coating the inside with some nail polish so it won't turn your finger green. 😀
ha-ha, this example was not in the song, 50 ways to loose your...
+Grace Robin
Hey, you gotta know how to fit that ring on your next partner. : D
Thanks for watching! : )
If u don't like the friend, don't tell em
But who doesn’t like their friends? Right!?
Steel pliers without any anti-scratch surface treatment 😳
Gosh have mercy... 😵💫
What would you suggest? Please share in the comments. 😀
Your ring looks burnt
Hi jc C, I assure you that the ring in the video wasn't "burnt". Metal surfaces oxidize when a torch is applied to them. And, surface reticulation can develop if the flame is too hot. These are all things that can easily be ameliorated with a little pickling, sanding and polishing. Good luck with your metal work.
Thanks for your support! : )