100% agree. Puddin is definitely one of the few that just keeps it real. Love to see the fact that he runs into the same issues as me when working on things.
I like seeing any video you put out. Working on family rigs is a way of life for sure. I’ve been having my daughter help me because then she will be less intimidated to work on things later on.
Don’t be self-conscious about those home - car-improvement videos videos. I like them. I still get a lot out of them. Hell, it’s content. Keep it up Homie
Cotter pins is spensive. I actually had a service manager that wanted to charge for every cotter pin, every shot of lubey doobie, and wanted us to count the amount of paper towels for each job. What a jakeleg
Hey puddin . The cluster in your suburban might just need to be taken out . Grab your soldering iron and rewet the solder on the main plug. I've done this on 2 of mine and it has brought them back to life. Always enjoy your videos.
No need to apologize for anything bud, maintaining your own vehicles is essential and a lot of people out still dig the quick random “how to” videos. Keep up the good work man, believe it or not you keep some of your viewers motivated to keep on keeping on with getting shit done that normally would keep being kept on the back burner
Working on family rigs is still good stuff to see. Your overcoming an issue with your projects helps us see solutions for ours. Good video, I sincerely appreciate the education from Prof. Puddin'!
👍👌👏 Very well done again (video and work). The fender bender repair is/looks good enough for me. Additionally it didn't cost anything (besides the work). Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards luck and health to all of you.
Love watching your show, catch all the episodes I can. One brief comment on gapping of spark plugs... I was always taught that you should never adjust the gap on any coated spark plug, "platinum, iridium, or others." Only regular copper plugs can be gapped, otherwise coating on tips is damaged. Love your videos keep em going.
I have fun watching you show . I like because you help your kids on their car to. I hope you still keep making more show and make people laugh. God bless you and your family and stick 50 to.
I appreciate you teaching as you go - along with the humor. That spark plug picture info was interesting. Also, appreciate the people who can pitch in and offer comments that increase the knowledge of the whole community.
Taking care of family vehicles is most important and enjoyed watching how you tackled it. It also keeps your family safe on the road too,that is way more important. Your band aid tricks on the spark car was very interesting. Common sense fixes carries you a long way and gets the job done. We Cajuns in southern Louisiana have learned how to Cajunize many parts that are not available any more. If if fits,works,but don't look pretty, tough potatoes,it works. You work with what you got,learned from my dad. He was the best part Cajunizer or made a part to fit.
Hey Puddin great job you doing it don’t matter what vehicle you working on we get to learn more and more thank you for all your family does love both your channel you have
I really enjoyed this video!! Family cars need love too. It also really shows how dedicated you are to putting your family first. It could have been easy to just put that off to create content on a project car but you are a true family man and that is truly admirable! Keep up the good work brotha!
Once again Puddin, we watch your channel because of you. You're selling us yourself as entertainment, not necessarily the work. Always keep that in mind. If i wanted to know how to change spark plugs and a wheel bearing, i would have googled : "how to change spark plugs" and "how to change a wheel bearing". The sooner you realise that YOU are the product we're here to see, the sooner you'll reach heights youve never known you could reach. I know it's hard, especially as humble family man as yourself, to grasp this, but it's basic showbusiness. Take it from someone who's worked in marketing for over a decade.
Don’t worry about fixing on the family rigs, you’re working on cars and that’s the main thing, sorry the Yukon didn’t have a significant boost in power but she is getting older. And Hank’s got a new wheel bearing which needed fixing, content is content. And hey when you get to the new shop you won’t have to worry about making too much noise for the neighbours cause there aren’t many around
You never know when someone might be needing to do the same maintenance on their vehicle, plus these videos are entertaining as well. One of your videos helped me when I was needing to do some on a Toyota type vehicle, so I speak from personal experience. 👍🏻
That 32 is all you need. I bought a big set and that’s the only socket that ever gets used. Also nice to see you doing the good ol maintenance wrenchin! The boring yet most important wrenching we do. Keep killing it man.
Puddin, I love watching all your videos! You are such a great guy/husband/dad, your humour is spot on and you make even the most mundane/essential jobs entertaining. Awesome content throughout. I love the way you are trying to do your best for the family. G_D bless you and your family in all that you do.
Puddin, I dont watch your video's because of the Rig, I watch because when the World gets to be to much, I can watch you tinker on crap and it makes me laugh. For that I thank You.
Workin' on family rigs...can be the most annoying at first, but most gratifying once you're done. I've been turning wrenches for over 25 years. The last thing I want to do is work on crap when I get home. However, making sure my family is safe is more important. It takes a swift kick in my own ass to get motivated to fix their stuff, but it always feels good after it's fixed, and fixed right. Love ya, Puddin!
It doesn't really matter what you are doing... we are going to watch! Always entertaining-- usually informative (even if you break stuff!). Thanks for posting!
Puddin, I will definitely always watch any videos you put out, it’s awesome that you are persevering through the process of building your house and keeping up with content while you are raising a family and building a channel Keep it up Remember all by Gods Grace
Puddin Time off the day. Can’t wait to see more videos soon. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God bless.
Hey Puddin 👋, that's cool keeping the woman happy in the household. As far as plugs go , I was told used what the motor came with out of factory. And yes there are some improvement to plugs now days. But as long as it's the correct plug number your good. Thanks for sharing and have a great day.👋
Hey, I ain’t never sinct a bearing replaced in a Spark. Nor have I sinct plugs being replaced in a Yukon. So, I learned something. Thanks and cheers from Maine!
Man I can’t believe how clean that Yukon is! Up here In good ol Ontario Canadia, we salt the shit out of our roads. Hardly see that age of Yukon. Great video👍🏻
I think the GMT800 series (Tahoe/Yukon/Suburban/Yukon XL/etc) is the best SUV ever made if you can afford a $3000 transmission rebuild every few years. Still WAY cheaper than a car payment especially with how much they are new now. Put a hundred bucks a month away in a transmission savings account. Find a good small transmission shop near you and help him make his boat payment every so often. The rest of the truck won't even fall apart unless you really jam on it all the time.
I use to Break Dance in the early 80's! Cham shirts , parachute pants,wigwam socks ,and adidas she'll sneakers with two of shoe laces per shoe weaved in a basket style pattern. We we breaking to My Addidis ,watching the movie Breaking!
I had a 98 Camaro and I had to jack the car up and go underneath to get the back plugs out. Pain in the rear! Enjoyed the video, Thanks for sharing! 😁👍
There once was a sparkplug in Nantucket too do a thorough job you can't ducket but Puddins the man says a watching fan & watched as he didn't say F----------uckit Ty for taking us along
I think it's great that you do work on newer stuff as well and make videos of it. Someone might find it useful to work on their own. The improvised body work would be cool to see too if that's ever something you're doing again! People always need to do that at some point in life
Gotta keep them family rigs runnin' good and safe. We all know regular maintenance has to come before the fun stuff. Love the videos on both channels. Take care.
I recon them old Motorcraft plugs are my choice The six that are in my 300 6cyl. Ford F-100 are 17 years old. I guess they cost about $3 each in 2005 when I bought the truck. It's my daily driver so it dont get the cosmetic attention show trucks receive but its kept in better health than Medicare keeps me. Love your show man. It's "PUDDIN TANGE".❤🐘🇺🇸
Another eventful and entertaining session. If you ever have to do the other side back wheel bearing maybe put bearing in the freezer before trying the install,we used to keep valve seats and guides in the freezer for the alco heads we serviced in the railways. Thanks puddin
Stepdaughter had the same situation happen with her Spark. Only difference is the passenger fender got ripped completely off the dang car. It'll be getting the ole white Rustoleum Turbo paint job.
There are still some of us out here that work on our own rigs, I'm over 65 and still gettin after it, keep up the good work. Dropping a fresh 454 and trans in my 76 C10 short box this weekend, should be a ripper.
6:20 was going to say, ac Delco double platinum for $19.99, those are about $10 EACH. I like Amazon, but I always get plugs from the parts store, most are too much of a s.o.b to change to risk using cheapies.
I got my stickers in the mail yesterday. That was quick service, thanks Puddin and family. One goes on my toolbox at work the other on my truck window.
The biggest thing that causes what you described is the throttle body gets all the black build up on it and it hurts performance bad! Pull it off clean it, your response will come back instantly! 👍
Buddy it doesn't matter if you're doing a video for family or not family always comes first remember that your daughter your other little daughter and your wife always come first before anything and if you're people can't understand that and you're making a short little video like you are and stuff who cares I love watching you I think you're an awesome man in your family is very very nice and tell Hot rod by the way that I said hi and
This man could make a 3 hour video of him organizing tools and I’d watch every second. Keep up the good work!
100% agree. Puddin is definitely one of the few that just keeps it real. Love to see the fact that he runs into the same issues as me when working on things.
@@CLINT2143 Same as all of us you mean. lol
Hell yes me too I’ve seen all videos
@@CLINT2143 q1
Same.
Hats off to your daughter for recognizing a weird noise & letting ya know !
I like seeing any video you put out. Working on family rigs is a way of life for sure. I’ve been having my daughter help me because then she will be less intimidated to work on things later on.
Don’t be self-conscious about those home - car-improvement videos videos. I like them. I still get a lot out of them. Hell, it’s content. Keep it up Homie
Hell puddin, no worries on the content. For some of us, working on rigs for family n friends is the scope of our car stuff. Very relatable content!
Cotter pins is spensive. I actually had a service manager that wanted to charge for every cotter pin, every shot of lubey doobie, and wanted us to count the
amount of paper towels for each job. What a jakeleg
Two family rigs brought up to spec in one night and working through a painful injury...Thats gold medal worthy!
Hey puddin . The cluster in your suburban might just need to be taken out . Grab your soldering iron and rewet the solder on the main plug. I've done this on 2 of mine and it has brought them back to life.
Always enjoy your videos.
People just love ya dude, we’ll watch what ever you’re up to!
Heck, we even keep watching while you eat your burritos. Thank you for not including the after effects in your videos.
Always a good day when that Puddin Notification comes in.
Definitely
Always enjoy whatever your doing Puddin. Thanks for sharing with us. Best wishes, Deb
Ive always liked those early 5.3’s. I still watched you do maintenance on the family fleet, no one’s complaining
I actually like watching family vehicle maintenance. Find it interesting and relatable.
No need to apologize for anything bud, maintaining your own vehicles is essential and a lot of people out still dig the quick random “how to” videos. Keep up the good work man, believe it or not you keep some of your viewers motivated to keep on keeping on with getting shit done that normally would keep being kept on the back burner
Puddin is number one in my book he is a very good motivator,Keep them videos coming...................................................Fort Worth,Tx
Working on family rigs is still good stuff to see. Your overcoming an issue with your projects helps us see solutions for ours. Good video, I sincerely appreciate the education from Prof. Puddin'!
👍👌👏 Very well done again (video and work). The fender bender repair is/looks good enough for me. Additionally it didn't cost anything (besides the work).
Thanks a lot for making teaching explaining recording editing uploading and sharing.
Best regards luck and health to all of you.
Love watching your show, catch all the episodes I can. One brief comment on gapping of spark plugs... I was always taught that you should never adjust the gap on any coated spark plug, "platinum, iridium, or others." Only regular copper plugs can be gapped, otherwise coating on tips is damaged. Love your videos keep em going.
I have fun watching you show . I like because you help your kids on their car to. I hope you still keep making more show and make people laugh. God bless you and your family and stick 50 to.
I appreciate you teaching as you go - along with the humor. That spark plug picture info was interesting. Also, appreciate the people who can pitch in and offer comments that increase the knowledge of the whole community.
I'm here in Canada and it's sunny 60 degrees out and it should be that all week. I love it.
Taking care of family vehicles is most important and enjoyed watching how you tackled it. It also keeps your family safe on the road too,that is way more important. Your band aid tricks on the spark car was very interesting. Common sense fixes carries you a long way and gets the job done. We Cajuns in southern Louisiana have learned how to Cajunize many parts that are not available any more. If if fits,works,but don't look pretty, tough potatoes,it works. You work with what you got,learned from my dad. He was the best part Cajunizer or made a part to fit.
Hey Puddin great job you doing it don’t matter what vehicle you working on we get to learn more and more thank you for all your family does love both your channel you have
love the editing! you make even boring maintenance on boring daily drivers a fun entertaining experience. thanks Puddin
My missus says although you don't take things seriously she's learned alot from you .. we love your videos
I really enjoyed this video!! Family cars need love too. It also really shows how dedicated you are to putting your family first. It could have been easy to just put that off to create content on a project car but you are a true family man and that is truly admirable! Keep up the good work brotha!
You are a good man taking care of the family rides. I know they appreciate you.
Once again Puddin, we watch your channel because of you.
You're selling us yourself as entertainment, not necessarily the work. Always keep that in mind.
If i wanted to know how to change spark plugs and a wheel bearing, i would have googled : "how to change spark plugs" and "how to change a wheel bearing".
The sooner you realise that YOU are the product we're here to see, the sooner you'll reach heights youve never known you could reach.
I know it's hard, especially as humble family man as yourself, to grasp this, but it's basic showbusiness.
Take it from someone who's worked in marketing for over a decade.
We enjoy whatever you work on. Awesome videos! 👍🇺🇲
Don’t worry about fixing on the family rigs, you’re working on cars and that’s the main thing, sorry the Yukon didn’t have a significant boost in power but she is getting older. And Hank’s got a new wheel bearing which needed fixing, content is content. And hey when you get to the new shop you won’t have to worry about making too much noise for the neighbours cause there aren’t many around
I love the junk yard video's, and the video's with his POP'S. who am I Kidding I like them All!
I watch both channels, because you make me laugh and learn stuff.
There is no problem working on family vehicles. You got to take care of those girls. Keep it up
You keep making them, we will keep watching them. Great entertainer Puddin! Have a great weekend. Good to see you keep up the family rigs.
Good day to be in shop ,rain coming...
I could watch these all day long
You never know when someone might be needing to do the same maintenance on their vehicle, plus these videos are entertaining as well. One of your videos helped me when I was needing to do some on a Toyota type vehicle, so I speak from personal experience. 👍🏻
That 32 is all you need. I bought a big set and that’s the only socket that ever gets used. Also nice to see you doing the good ol maintenance wrenchin! The boring yet most important wrenching we do. Keep killing it man.
Grateful for this second channel! Gets me closer to Monday! Blessings 👍👊🙏
Puddin, I love watching all your videos! You are such a great guy/husband/dad, your humour is spot on and you make even the most mundane/essential jobs entertaining. Awesome content throughout.
I love the way you are trying to do your best for the family. G_D bless you and your family in all that you do.
Outstanding!!!!!!!!!!!!!!! Mortski should be proud of his Pudin!
Puddin, I dont watch your video's because of the Rig, I watch because when the World gets to be to much, I can watch you tinker on crap and it makes me laugh. For that I thank You.
Puddins fab shop plate saved that car from being totaled.
Workin' on family rigs...can be the most annoying at first, but most gratifying once you're done. I've been turning wrenches for over 25 years. The last thing I want to do is work on crap when I get home. However, making sure my family is safe is more important. It takes a swift kick in my own ass to get motivated to fix their stuff, but it always feels good after it's fixed, and fixed right. Love ya, Puddin!
Great to see you taking care of family vehicles
Working on the family rigs is about all I do besides work. You were singing my tune in this one brotha.
It doesn't really matter what you are doing... we are going to watch! Always entertaining-- usually informative (even if you break stuff!). Thanks for posting!
Puddin, I will definitely always watch any videos you put out, it’s awesome that you are persevering through the process of building your house and keeping up with content while you are raising a family and building a channel
Keep it up
Remember all by Gods Grace
Puddin Time off the day. Can’t wait to see more videos soon. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God bless.
Hey Puddin 👋, that's cool keeping the woman happy in the household.
As far as plugs go , I was told used what the motor came with out of factory. And yes there are some improvement to plugs now days. But as long as it's the correct plug number your good. Thanks for sharing and have a great day.👋
We will watch you work on anything. We are here to smile.
always nice to see uncle Bill drop by
Hey, I ain’t never sinct a bearing replaced in a Spark. Nor have I sinct plugs being replaced in a Yukon. So, I learned something. Thanks and cheers from Maine!
Puddin I’d watch you work on anything, it’s always a learning experience!
Those Sparks are like headlights on wheels. Man those things are huge!
All puddin’ content is good content regardless of the topic of the day.
LMAO, that Haynes manual creased me up, this guy is as mad as a hatter!
Tiny bit of anti seize never hurt on those threads.
Man I can’t believe how clean that Yukon is! Up here In good ol Ontario Canadia, we salt the shit out of our roads. Hardly see that age of Yukon. Great video👍🏻
I think the GMT800 series (Tahoe/Yukon/Suburban/Yukon XL/etc) is the best SUV ever made if you can afford a $3000 transmission rebuild every few years. Still WAY cheaper than a car payment especially with how much they are new now. Put a hundred bucks a month away in a transmission savings account. Find a good small transmission shop near you and help him make his boat payment every so often. The rest of the truck won't even fall apart unless you really jam on it all the time.
I use to Break Dance in the early 80's!
Cham shirts , parachute pants,wigwam socks ,and adidas she'll sneakers with two of shoe laces per shoe weaved in a basket style pattern.
We we breaking to My Addidis ,watching the movie Breaking!
I had a 98 Camaro and I had to jack the car up and go underneath to get the back plugs out. Pain in the rear! Enjoyed the video, Thanks for sharing! 😁👍
22k views within 5 hours!! HOLY CRAP @Puddin !! Way to go brother!! Stay blessed!!
If you don't take care of family, nothing matters more then them!
There once was a sparkplug in Nantucket
too do a thorough job you can't ducket
but Puddins the man
says a watching fan
& watched as he didn't say F----------uckit
Ty for taking us along
I think it's great that you do work on newer stuff as well and make videos of it. Someone might find it useful to work on their own. The improvised body work would be cool to see too if that's ever something you're doing again! People always need to do that at some point in life
Like the repairs to the family cars. Thank you for sharing Puddin.
Working on any rig is cool. We are here for you broseph
Your videos are one of the things I look forward to every week. It makes Monday’s way better and then these extra videos are great.
Hey my son has a spark, don't forget the transmission filter to change it
It might have been the camera angle, but it looked like the cap on you master cylinder was cross threaded
Great video 👍. It's always a good idea to change the fuel filter as well.
Anybody else have that old truck driver song “Giddy Up Go” by Red Sovine pop in your head when he was backing the Yukon out? 😂
Gotta keep them family rigs runnin' good and safe. We all know regular maintenance has to come before the fun stuff. Love the videos on both channels. Take care.
Hank needs a Tow Rolla push bumper now.
Reminds me - and gets me off my butt - to look at a bit of maintenance on our family rigs!
And as usual puddin… more DAMN good content. Thank you for all the hard work you do to keep us entertained
Great entertainment. Thank you.
Family rigs are what I drive. Good content. 👍🍁
I recon them old Motorcraft plugs are my choice The six that are in my 300 6cyl. Ford F-100 are 17 years old. I guess they cost about $3 each in 2005 when I bought the truck. It's my daily driver so it dont get the cosmetic attention show trucks receive but its kept in better health than Medicare keeps me. Love your show man. It's "PUDDIN TANGE".❤🐘🇺🇸
Keep an eye on the pcv valve on the spark. They are known for sticking and sucking every once of oil out of itself.
Excellent video Puddin! Man it's so nice to see you 2 or 3 times a week! Love watching and laughing with you!
Another eventful and entertaining session. If you ever have to do the other side back wheel bearing maybe put bearing in the freezer before trying the install,we used to keep valve seats and guides in the freezer for the alco heads we serviced in the railways. Thanks puddin
I love how tough the Half Hawl looks with those tires. 🙂
Dad's job make sure the cars run good! You are pops👍🤘
I'm with Chris C, you make the video's and I'll watch 'em!!
Stepdaughter had the same situation happen with her Spark. Only difference is the passenger fender got ripped completely off the dang car. It'll be getting the ole white Rustoleum Turbo paint job.
There are still some of us out here that work on our own rigs, I'm over 65 and still gettin after it, keep up the good work. Dropping a fresh 454 and trans in my 76 C10 short box this weekend, should be a ripper.
NICE.
Awesome!! I’m 58 and wrench on my 88 K5 and my Camaro every day. Just dropped a built 350 w/Magnum 6 spd in the Camaro.
@@MrSpartanPaul That should be a nice combo with the 6 spd.
I like this stuff. I wish I had more time to work on my cars. This helps scratch the itch while I'm doing other things too.
I love any video you make! I have a Silverado and a Chevy sonic so this video was right up my alley!!!!
Puddin was so full of sarcasm in this video. I loved it
You realize some plugs are much more easily accessible through the wheel well! Wish I learned that tip many years ago
6:20 was going to say, ac Delco double platinum for $19.99, those are about $10 EACH. I like Amazon, but I always get plugs from the parts store, most are too much of a s.o.b to change to risk using cheapies.
I got my stickers in the mail yesterday. That was quick service, thanks Puddin and family. One goes on my toolbox at work the other on my truck window.
The biggest thing that causes what you described is the throttle body gets all the black build up on it and it hurts performance bad! Pull it off clean it, your response will come back instantly! 👍
Buddy it doesn't matter if you're doing a video for family or not family always comes first remember that your daughter your other little daughter and your wife always come first before anything and if you're people can't understand that and you're making a short little video like you are and stuff who cares I love watching you I think you're an awesome man in your family is very very nice and tell Hot rod by the way that I said hi and
Most people don't know its hard to beat factory air cleaner most aftermarket should be called hot air intake
wrong. i like watching you work on family rigs. great content like always.
I love listening to you. Take good care of those ladies.