I have a konica minolta c353 why the second drawer does not detect me the format and 'stuck only shows me on the dysplay question marks ??????. the paper from the tray of the drawer rises. thanks a lot Tomasz always in the leg greetings
iam using konica minolta bizhub C226 iam not able to scan and print getting error getting error message "Preparing Scan"another one is Preparing Security/external document" this both are blinking contunesly.need ur help
Hey chief! I've got a problem where i get a whole lot a lines on the paper, but when i zoom in on those "lines" i see small dots.. now.. frustrating, as hell.. I did change drums, C, Y, M and K, also i changed the Fusing unit (heating unit, or what ever its called) also changed the Waste box aaand the transfer/image belt. All original and komplete units, no fanzy panzy china copy stuff.. BUT! Still im getting the lines on my paper.. :( Would you by any means have an idea, on what the h*** is going on..? I did send you an email.
thnak you for your video. i 'm a french a we have a problem with this printer error code : C-D002. can you help us to solve the pbs? we have already test to reset has your video but no way.best regard
Code indicates HDD (hard drive). Try removing HDD and unsettling through service mode. It will run without the HDD. Hope that helps - I checked online and that can be a difficult code if it’s intermittent. If it continues after HDD is removed and unset, try removing fax kit, if it has one, and unsettling that. Take Care
The bizhub 363 uses a completely different design than the 360 type. If your talking about the 360, 420, 500, 361, 421, and 501 than the toner drive is all the same for all the above models. If your talking about 283, 363, 423 than that is a different system. You might need to get a konica tech. Take Care, and good luck.
Hello Leo, the code indicates the TCR sensor for the cyan developer unit. Make sure your not having any issues with the toner feed with cyan, then replace the cyan developer unit and due the initial stabilization and gradation - hope that helps.
If you have tried it a few times and it doesn’t work, than it is indicating a hard failure with your fuser and or fuser drive. You or a technician will probably need to replace the fuser or the fuser drive motor depending on the model bizhub.
Hello Arif, I found a helpful feed on Copytechnet you might want to check out. Related to firmware maybe, or it could be the overall control board. The feed is for a error code c192 but it looks like it might apply. Take Care
Depending on what model, the code indicates a failure in the cooling fan for the transfer belt. You might want to check that fan, replace if necessary, then reboot machine.
@@valleyofficeequipmentsacra8510 thanks so much for your feedback. the model is c360, and the message the screen is "AN INTERNAL ERROR OCCURED. OPEN AND THEN CLOSE THE FRONT DOOR."... I have tried it and didn't work Please any idea?
- you'll get an error if fax board or HDD is missing but machine thinks it has it. Don't remember exact code, but sounds like fax. Confirm fax & HDD installed, if not - unset.
![[Tutorial]C2557 bizhub 200, 250, 350, 222, 282, 362 FOTOCOPIADORAS](http://i.ytimg.com/vi/3sUAptwKUHc/mqdefault.jpg)
![[Tutorial]C2557 bizhub 200, 250, 350, 222, 282, 362 FOTOCOPIADORAS](/img/tr.png)
I am working with a bizhub 223 and this video helped me so much!!!! saved the company a couple hundred bucks on calling an I.T😆 Thanks so much!!
Thank you Valley Office!!! you saved a full morning of me digging into my C450 to lube some gears and switches etc....!!! Matt, San Diego
SO HELPFUL!! clear and easy steps🙌🏼 saved me a few $ from having to call a tech
& I have a Bizhub 223 my error code was C2237 and these steps cleared the code!
Thank you so much for your help! This saved a lot of money and made us very proud to repair it by ourselves. Greetings from Germany
Muy buena información, me fue de mucha ayuda para solucionar el error en mi copiadora.
B.E.A.UTIFUL. Fixed the problem for our bizhub 558e error code C-3B03.
Thanks for the upload!
Thanks a lot .. you help me ....was Just now jappend this to me on my minolta c220... thanks
You saved my day thank you from Morocco
Thx for sharing. Does this work on a c250i ? Mines stuck on the boot screen?
Sorry, I don’t think that procedure will work on the i series bizhubs
thanks sir
good job👍👍👍
Thank you for the demonstration can you help the bizhub Minolta C452 mixing with excessive blue color on first print
Start with replacing the cyan image unit.
UF GRACIAS ME FUE DE MUCHA AYUDA YA QUE YO SOY NUEVA CON ESTE TIPO DE MAQUINA SE AGRADECE
Thank you so much for your help
Is very helpful
I have a konica minolta c353 why the second drawer does not detect me the format and 'stuck only shows me on the dysplay question marks ??????. the paper from the tray of the drawer rises. thanks a lot Tomasz always in the leg greetings
Thank you, you are a life saver.
How to solve trouble code c4501 on Konica bizhub please.
iam using konica minolta bizhub C226 iam not able to scan and print getting error getting error message "Preparing Scan"another one is Preparing Security/external document" this both are blinking contunesly.need ur help
You might try doing an all data clear, then reinstall HDD and format.
Muito boas contribuiçoes e ensinamentos
hello, we get Deleted Due To Error while doing scan to email. only one page goes but it works like this on multiple pages. scan to smb the same way
It sounds like a credentials problem? You might need an IT professional.
thankful you are a great person
Good one
Thank you so much.. very helpful
ಥ‿ಥ
I click on the reset no response, and AES is showing by the side
Please help me, my bizhub 601 is remaining on warming up. Ready to scan, it remain like this for long. Please help.
Much appreciated
Hey chief!
I've got a problem where i get a whole lot a lines on the paper, but when i zoom in on those "lines" i see small dots.. now.. frustrating, as hell.. I did change drums, C, Y, M and K, also i changed the Fusing unit (heating unit, or what ever its called) also changed the Waste box aaand the transfer/image belt. All original and komplete units, no fanzy panzy china copy stuff.. BUT! Still im getting the lines on my paper.. :(
Would you by any means have an idea, on what the h*** is going on..?
I did send you an email.
SO So helpful, thanks a lot
firmware for bizhub c220 is required as machine is restarting again and again
how to fix problem Trouble code c- d010 konica minolta bizhub c220 thinks
Hi, thanks for your video. On my C280, I got error C-C172. Would this procedure reset any error code? Not sure if my error code will re-appear.
Looks like that's related to not having a hard drive in? My procedure probably won't clear that - you can try it. Try changing the hard drive.
Please help me, my konica bizhub 364e kode trouble c- 3425.
Thank you very much
thnak you for your video. i 'm a french a we have a problem with this printer error code : C-D002. can you help us to solve the pbs? we have already test to reset has your video but no way.best regard
Code indicates HDD (hard drive). Try removing HDD and unsettling through service mode. It will run without the HDD. Hope that helps - I checked online and that can be a difficult code if it’s intermittent. If it continues after HDD is removed and unset, try removing fax kit, if it has one, and unsettling that. Take Care
help please with trouble c 3721 in minolta C360
why does the toner bottle not rotate causing the toner K image to appear continues to use 100 sheets each?
Your toner rotation sensor is probably dirty or even defective.
@@valleyofficeequipmentsacra8510 thanks for the response, now the toner motor is spining, but not for the toner box,for bizhub 363, why?
The bizhub 363 uses a completely different design than the 360 type. If your talking about the 360, 420, 500, 361, 421, and 501 than the toner drive is all the same for all the above models. If your talking about 283, 363, 423 than that is a different system. You might need to get a konica tech. Take Care, and good luck.
@@valleyofficeequipmentsacra8510 oke thanks..
What is issue in C452 with error code is C-3299.?
Super! thanks!
muchas gracias!
Большое спасибо
My ineo+ is showing c255D pls how can I clear the error code.
Thank you very match
thanx boss
👍👍👍
hi i have the same model and i have the error C-D403. anyone can give me some tips. thank u for any help.
Hello Nikos, It might be a bad MFP main board or you could try and re-installing the firmware.
Hi. How resolve error c5354 . Bizhub c250. ? Thanks.
C5354 code means your Ozone Ventilation Fan Motor has failed to turn or spin up as it should . You will need to either clean or replace the fan.
Thanks for your information. But where is the exactly the place?
Lots of thanks.. it worked...
TK FROM PERU
merci boqou
na minha C224e ta aparecendo um codigo C-D390 Alguém pode me ajudar?
Please how c-9401 in bizhub 423🙏🙏
That error indicates a Exposure LED failure. If you search: 'Bizhub 423 error c-9401' you'll see one RUclips that found a cable problem.
tenho uma bizhub c280 impreme branco quando for petro e branco
How to solve c5371 when displace
That code using indicates a cooling fan failure. Check the manual to determine which fan it is and then order a new one :)
merces
Hello sir
Hallo sir
Sir my bizhub 360 is problem
Pls help,my bizhub C360 has trouble code error of C-2551
Hello Leo, the code indicates the TCR sensor for the cyan developer unit. Make sure your not having any issues with the toner feed with cyan, then replace the cyan developer unit and due the initial stabilization and gradation - hope that helps.
Did not work. Any other suggestions.
Error code C-3102
If you have tried it a few times and it doesn’t work, than it is indicating a hard failure with your fuser and or fuser drive. You or a technician will probably need to replace the fuser or the fuser drive motor depending on the model bizhub.
.
Thank you sir
What is Error 5225 Bizhub C253
Sorry, What is Error C-2552 Bizhub C 253
I don't know what error 5225 is, but if its 2552 than, this is a cyan image unit failure.
sir problem code c-191 plz information about it
Hello Arif, I found a helpful feed on Copytechnet you might want to check out. Related to firmware maybe, or it could be the overall control board. The feed is for a error code c192 but it looks like it might apply. Take Care
What to do with this error
What model bizhub? And what’s the error code?
Hi need help
When press trouble reset the world ok in not coming
Any help thank
Your screen might need calibrating? Try touching in different places around the trouble reset button.
@@valleyofficeequipmentsacra8510
Hello sir
I replace the screen doing same thing
What model bizhub? What is the error code?
@@valleyofficeequipmentsacra8510 c 253
@@kissbbkara5319 error code?
How do I remove code c-2355
Depending on what model, the code indicates a failure in the cooling fan for the transfer belt. You might want to check that fan, replace if necessary, then reboot machine.
@@valleyofficeequipmentsacra8510 I have done both trouble shooting but didn't work
@@valleyofficeequipmentsacra8510 thanks so much for your feedback. the model is c360, and the message the screen is "AN INTERNAL ERROR OCCURED. OPEN AND THEN CLOSE THE FRONT DOOR."...
I have tried it and didn't work
Please any idea?
@@Nollyfavouritetv If you have replaced your transfer belt cooling fan motor FM6 than it might be your printer control board.
@@valleyofficeequipmentsacra8510 no I have not replaced anything yet
Please help me! Bizhub 350 error C5351?
help me error c 6708
Try replacing the CCD board or the lamp.
It works , Thanks
Plz say b004 cod not rimov?
- you'll get an error if fax board or HDD is missing but machine thinks it has it. Don't remember exact code, but sounds like fax. Confirm fax & HDD installed, if not - unset.
Stock on konia manolta
Stock on konia manolta
If I installed fax and HDD than stock Konica Minolta
What model bizhub is it?