It worked for me the vent was stuck to windshield only, after tapping the control box it started working for face feet too when I switched it. Thank you.
@@coaltraintee90hey, I found out that if you still having problems with one side being colder than the other, it means that the ac blenders are unsynchronized, all you have to do is put your ac at max speed to the hottest temp for 5 minutes then put it to the coldest temp on both driver and passenger ac compartment and it should be cold on both sides
Open your glove box clean all material Out of your glove Box. There's two slits on both sides Pull them inward. The glove box should fall. There are 2 identical boxes tap and it should begin working.
It worked for me the vent was stuck to windshield only, after tapping the control box it started working for face feet too when I switched it. Thank you.
You two make a great couple. Thanks for the advice
Thanks
Aye thank you man, I was having a really bad moment with my ac and I did this and it worked 🤝🏽
You're welcome glad it help
@@coaltraintee90hey, I found out that if you still having problems with one side being colder than the other, it means that the ac blenders are unsynchronized, all you have to do is put your ac at max speed to the hottest temp for 5 minutes then put it to the coldest temp on both driver and passenger ac compartment and it should be cold on both sides
So simple, but how do you get the dash to drop like that?
Open your glove box clean all material Out of your glove Box. There's two slits on both sides Pull them inward. The glove box should fall. There are 2 identical boxes tap and it should begin working.
So the blend door actuator for the driver side is the two boxes where you bumped?
Thank You!
So the driver side actuator is on the passenger side??
No there’s one on each side and one in the rear.
Temp fix definitely
Yep temp fix