YES, I watched the members only behind the scenes at 3Dbotmaker from 3 years ago. All 4 of these cars were in the qualifications. Seems I may need to find the wheels for the BMW.
Well, a couple things, I'm sure Nick track tested each casting in the narrow laned start area and wide open sections, so any of the 8 choices will find the finish line at least. Cool to see you use the length of orange track and see what "wiggle room" each of the three had there, just to get a baseline. Polishing under the wing spoiler is tough, do you have any tiny Scotch Brite on a steek? You seem concerned with the sharp corners at the front of the "box" in some of these bases 6:43 for reference. I call the tool "Sprue Cutters" but your small flush cut pliers can open those up, and you're not changing the outside of the car, so that should be okay in the rules. You like the roominess of the Bentley, saying it has more "ceiling height." With that comes a higher native CG for which to compensate and if the car gets slow in a turn, that's the difference between a low finish with some points and a DNF from rollover and no points. Rollover might not come into play that much at _The Big O_ compared to other venues. I'm letting my AFCR bias get in the way again there Putting it out there, the HW Motor Show 5-pack from this year also has the Aston-Martin, and should be out there on the pegs if you need a quick replacement
My original comment must have got lost over the Pacific! Anyways, will be watching, cheering you on. Still digging through boxes of castings here, found the Super Trofeo specified, but looks to have a couple of shortcomings. Shorter wheel base and long nose for two. Cheers Marc D
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
YES, I watched the members only behind the scenes at 3Dbotmaker from 3 years ago. All 4 of these cars were in the qualifications. Seems I may need to find the wheels for the BMW.
cool pre track test on diecast race .... great share, Inspection done ... let's go race
Thanks but a few more things to check.
Hey bill love to see the corvette get a shot one of my personal favorites and i like the wheel base
Thanks man. It is looking like a good pick. Will let you know in next video.
Well, a couple things, I'm sure Nick track tested each casting in the narrow laned start area and wide open sections, so any of the 8 choices will find the finish line at least. Cool to see you use the length of orange track and see what "wiggle room" each of the three had there, just to get a baseline. Polishing under the wing spoiler is tough, do you have any tiny Scotch Brite on a steek?
You seem concerned with the sharp corners at the front of the "box" in some of these bases 6:43 for reference. I call the tool "Sprue Cutters" but your small flush cut pliers can open those up, and you're not changing the outside of the car, so that should be okay in the rules.
You like the roominess of the Bentley, saying it has more "ceiling height." With that comes a higher native CG for which to compensate and if the car gets slow in a turn, that's the difference between a low finish with some points and a DNF from rollover and no points. Rollover might not come into play that much at _The Big O_ compared to other venues. I'm letting my AFCR bias get in the way again there
Putting it out there, the HW Motor Show 5-pack from this year also has the Aston-Martin, and should be out there on the pegs if you need a quick replacement
Thanks my friend, Next video, I will show my pick. Taking all into consideration. I tend to agree with you. I will explain my choice then.
Scotch Brite, on a Steek, bwaaahaaha.
My original comment must have got lost over the Pacific!
Anyways, will be watching, cheering you on. Still digging through boxes of castings here, found the Super Trofeo specified, but looks to have a couple of shortcomings. Shorter wheel base and long nose for two.
Cheers Marc D
Thanks. I got the card from you and Leanne today. My thoughts back at you both. Merry Christmas.
@@sstdiecastracing2372 Cheers my firend! Thanks