WATCH NEXT: Check out how to build inside of the HYTE Y60 Chassis: ruclips.net/video/XRaQic7rbCA/видео.html Here we review the newest DXRacer Craft Series Gaming Chair, unbox, build and do a complete review of the Thinker, CRA/D5000/W. It's not Auguste Rodin's Thinker, it's the new Thinker.
Can you please make a video on how to daisy chain Artic A RGB Fans also if the B550 gaming motherboard as 1 3 pin A RGB Header and your Artic 240 A RGB AIO need to use the same 3 pin A RGB header what can you do or where do you plug the AIO 3 pin Header
yes, its not the thickest, I would recommend this one, I reviewed it after the DXRacer and you also wont sink into it: ruclips.net/video/MkbbOc7utVE/видео.html
Hey man I have a msi mag b550 tomahawk with a amd ryzen 7 5800x when I boot it up it’s black screen so I did a bios update and it opens up the bio and let’s me mess with the sitting but when I save and exit it stays black screen can u give me a hand plz and thanks
eeek, ok the manual doesn't give me much info but I would recommend going to the exit section in your BIOS, loading optimal defaults, save and exit, then go back in the BIOS, load XMP, save and exit and see if that helps.
still working great, but for the price, I would still recommend the Maingear Forma R Aspen White, Well, I reviewed the Aspen White, I would assume the other Forma R's are the same. This video is 4 years old and I am still using this chair as my main chair and it almost looks perfect: ruclips.net/video/L2TMdN8_4ik/видео.html
@@itzcasper6399 always a pleasure, since I review so many, my daughter uses it now, and I use the one I linked up, I have another review coming up soon though on another chair, maybe this week or next.
In your thumbnail you have your hand closed under your chin like we all remember the thinker statue has but now the real statue has its hand open under the chin. Anyways cool video
ahhh yeah haha, i was looking right at the picture in this picture, but I was worried about the left hand, not so much the right hand, thanks so much for your kind words, this one took me the longest out of any chair review video to edit.
if you think $500 is expensive.. dont bother looking at herman miller chairs... i spent $500 on my dxracer about 10 years ago.. and its still holding up.. its about to be replaced.. and considering the alternatives.. $500 isnt a bad deal at all
WATCH NEXT: Check out how to build inside of the HYTE Y60 Chassis: ruclips.net/video/XRaQic7rbCA/видео.html
Here we review the newest DXRacer Craft Series Gaming Chair, unbox, build and do a complete review of the Thinker, CRA/D5000/W.
It's not Auguste Rodin's Thinker, it's the new Thinker.
Flying by to drop some love and blessings your way brother!!!💪🏽💪🏽
Thank you so much my friend, I truly appreciate it and I hope you enjoyed this video, love and blessings to you and yours as well my friend.
Can you please make a video on how to daisy chain Artic A RGB Fans also if the B550 gaming motherboard as 1 3 pin A RGB Header and your Artic 240 A RGB AIO need to use the same 3 pin A RGB header what can you do or where do you plug the AIO 3 pin Header
This is the build video, ruclips.net/video/eRj1oSruq1U/видео.html and this is the wire management video ruclips.net/video/Fn-9wSsi-Sg/видео.html
Is the seat firm enough supports you not to sink in it after 1-2 hours ?
yes, its not the thickest, I would recommend this one, I reviewed it after the DXRacer and you also wont sink into it: ruclips.net/video/MkbbOc7utVE/видео.html
How far back does it recline?
odd I didn't include it but it goes up to 135°
Hey man I have a msi mag b550 tomahawk with a amd ryzen 7 5800x when I boot it up it’s black screen so I did a bios update and it opens up the bio and let’s me mess with the sitting but when I save and exit it stays black screen can u give me a hand plz and thanks
So are you on BIOS version 7C91vA9, www.msi.com/Motherboard/MAG-B550-TOMAHAWK/support
Yes
eeek, ok the manual doesn't give me much info but I would recommend going to the exit section in your BIOS, loading optimal defaults, save and exit, then go back in the BIOS, load XMP, save and exit and see if that helps.
Okay I’ll try that
If the bio is flashed already it should boot to bio right
Update on if it’s comfortable or not?
still working great, but for the price, I would still recommend the Maingear Forma R Aspen White, Well, I reviewed the Aspen White, I would assume the other Forma R's are the same. This video is 4 years old and I am still using this chair as my main chair and it almost looks perfect: ruclips.net/video/L2TMdN8_4ik/видео.html
After 1 year , is it comfortable ?
it is, but there are more comfortable, for now, this is the best: ruclips.net/video/MkbbOc7utVE/видео.html
@@ThisBytesForYou thanks, I appreciate it.
@@itzcasper6399 always a pleasure, since I review so many, my daughter uses it now, and I use the one I linked up, I have another review coming up soon though on another chair, maybe this week or next.
Sorry bro but the thinker statue now has his hand open lol
huh?
In your thumbnail you have your hand closed under your chin like we all remember the thinker statue has but now the real statue has its hand open under the chin. Anyways cool video
ahhh yeah haha, i was looking right at the picture in this picture, but I was worried about the left hand, not so much the right hand, thanks so much for your kind words, this one took me the longest out of any chair review video to edit.
$500😳,,, I'll use Grandma's kitchen table chair before that.
yeah, these prices are outrageous for sure... Grandma's chair might be more comfortable too
if you think $500 is expensive.. dont bother looking at herman miller chairs...
i spent $500 on my dxracer about 10 years ago.. and its still holding up.. its about to be replaced.. and considering the alternatives.. $500 isnt a bad deal at all