Would have like to seen more of your thru-hull removals. That interest me on an old boat that you have. I enjoyed your method of removal and learned a bit.
Just catching up. Seeing you touching the rudder that almost got you killed was a moment. Great recommendation for the Ventura Harbor Boatyard. I'm docked at Channel Islands, no idea such a terrific yard was so close. My thruhulls are all ball valves, bronze, 20 years old. Work fine. (Still might replace them if recommended.) I've done a lot more work for a lotta more years on houses and buildings. For over 40 years I've replaced gate and seat (rubber washers) valves with ball valves. Can't think of any that ever had a problem.
Great shirt. Also you will never need worry about blisters.. your boat was built pre-energy crisis. It is real fiberglass. It only becomes a problem for boats built from 1975 into the early 80s. I have a 1964 Alberg 30 and its a tank.
I haven't hauled mine out yet, but this video has me super excited to do it. She is even more beautiful when you can see the full profile out of the water! Previous owner warned me the rudder needs attention and has me worried, I have the same all wood rudder.
My Tartan 34 C 1970 never had a blister, I was told that the Polyester resin formula changed after the 1973 Oil crisis and since then came the blister situation. Aren't we glad we have a boat that is much thicker, strong and less maintenance than the newer ones!!! Cheers, Richard
Wow! I can't believe it is a wood rudder! I would think that while on the hard you could sand it down and lay some thin fibreglas mat over the wood. Those thru hulls really were toast and good that on the ones you are keeping they will be larger, especially the engine intake. Big job ahead of you kids! Who would have believed that Ventura would be the place to haul out?
I was shocked about the rudder for sure. I asked the foreman if I should cover it in glass and he said encapsulating wood that had been wet for that long would do far more harm than good. I had to remind myself that ships were made of wood for centuries.
Well done. I've spent many days at that boatyard and it is one of the best. I had 13 thru hulls on my Mason when I hauled her out... only two remain. I don't like holes in my boat. Peace.
That was a good clean up James Camille weather got you there man that was slick and anyway this is a cool episode again man get with it alright peace out
My first sailboat was a 1964 Pearson Triton, 29', fractional rig, but almost a twin of Carl Alberg's 30'. Man, was I ever green. It was embarrassing to be such a novice. I covered the rudder with cloth and polyester resin and within a year most of it had fallen off. Most Albergs and Pearsons still have the wood rudders.
The rudder on my Pearson wanderer looked about the same. I was all ready to make new but was advised to leave it. Lasted since the sixties. Fixing the thu-hulls is the best bang for the buck. The cut less bearing is another thing to replace.
The cutlass bearing is a whole episode of crazy and yes it gets replaced along with everything else in that system. Yeah a few days after being super freaked out about the rudder I remembered that ships were made out of wood for centuries and I was just being shortsighted
The cutlass bearing is a whole episode of crazy and yes it gets replaced along with everything else in that system. Yeah a few days after being super freaked out about the rudder I remembered that ships were made out of wood for centuries and I was just being shortsighted
Sailor James yep I was changing mine and cut a slit in the hull using a grinder like you are using. Didn’t notice it till I was buttoning up the seal and could see light.
I just got a 1969 Alberg 30 that I'm restoring what are some things I should look for in the restoration? Mine is mostly solid, i need to repair my mast beam, but that's not too hard
Hi James , If you will be venturing into southern ocean, do you think it would be a good idea, once you build a new rudder and beef up rudder hardware to keep old rudder as spare? Be well !
If I replace the rudder with a glass and foam version I will have full faith in it. We don't plan on lingering in the southern ocean and dont have stowage space for a spare rudder. Our new windvane will be our emergency rudder.
Nice start to your project. I'm sure the boat is back in the water by now, but you mentioned you were going to sand the bottom. Did you guys think about having the hull soda blasted? it would save you a ton of time, not sure how expensive it would be for you boat. You guys are great, thanks for sharing your journey.
I wanted to take it down to gel coat but it was going to be VERY expensive and the yard requires you hire them for any sandblasting because of the environmental risks with the hold paint and dust and clean up, which is completely understandable. We will have it taken down to gel coat in a few years in South America.
That guy saying your rudder is OK. Better look up Teredo Worms! If theres a spot of bare wood they Will get in and won't take long to eat the rudder up! I had a warram cat and had to replace four layers of wood on the keel!
Finding a yard where you can work isn't hard in the Netherlands. Where you can Weld and Grind is very difficult. Environment and neighboring boats are a big issue. I live on my 41ft steel ketch and keep it well painted.
All of the episodes are still online, here is the playlist of season one where I bought the boat and got her sailing ... ruclips.net/p/PLm0chdAnUTpxScTyiZIvnNE5Fz7edDkhU
@@SailorJames Its rad to go through your catalog and find little clips like this one. (and the most well known one from episode 1 where the Seller says "Hope you go around the world") Thanks for all the videos and free knowledge.
Would have like to seen more of your thru-hull removals. That interest me on an old boat that you have. I enjoyed your method of removal and learned a bit.
Just catching up. Seeing you touching the rudder that almost got you killed was a moment. Great recommendation for the Ventura Harbor Boatyard. I'm docked at Channel Islands, no idea such a terrific yard was so close.
My thruhulls are all ball valves, bronze, 20 years old. Work fine. (Still might replace them if recommended.) I've done a lot more work for a lotta more years on houses and buildings. For over 40 years I've replaced gate and seat (rubber washers) valves with ball valves. Can't think of any that ever had a problem.
So strange seeing this! Tritea looks so bare!
I love the work barge with Ray Anthony dance music. Nice touch.
Great shirt. Also you will never need worry about blisters.. your boat was built pre-energy crisis. It is real fiberglass. It only becomes a problem for boats built from 1975 into the early 80s.
I have a 1964 Alberg 30 and its a tank.
Fantastic
Great! I’m looking at Albert 30 also
I haven't hauled mine out yet, but this video has me super excited to do it. She is even more beautiful when you can see the full profile out of the water! Previous owner warned me the rudder needs attention and has me worried, I have the same all wood rudder.
Great video!
My Tartan 34 C 1970 never had a blister, I was told that the Polyester resin formula changed after the 1973 Oil crisis and since then came the blister situation. Aren't we glad we have a boat that is much thicker, strong and less maintenance than the newer ones!!! Cheers, Richard
Oh that’s good to hear!!!
Oh that’s good to hear!!!
Wow! I can't believe it is a wood rudder! I would think that while on the hard you could sand it down and lay some thin fibreglas mat over the wood. Those thru hulls really were toast and good that on the ones you are keeping they will be larger, especially the engine intake. Big job ahead of you kids! Who would have believed that Ventura would be the place to haul out?
I was shocked about the rudder for sure. I asked the foreman if I should cover it in glass and he said encapsulating wood that had been wet for that long would do far more harm than good. I had to remind myself that ships were made of wood for centuries.
Well done. I've spent many days at that boatyard and it is one of the best. I had 13 thru hulls on my Mason when I hauled her out... only two remain. I don't like holes in my boat. Peace.
GREAT START !
I'm learning a lot and loving this series!!!
Awesome! Thanks for watching!
Awesome! Thanks for watching!
The Boat Yard in Channel Islands Harbor also allows you to do your own work and stay on your boat, I have done it the last 2 haul outs.
That’s great to know ! I will let people know about that option as well when I am asked
Nice recovery on the wedding! Looking for ti the next video. Good luck.
Do what you can 😂
Good job!
That is a beautiful hull. Great boat!
I was so happy to finally see her out of the water!
That was a good clean up James Camille weather got you there man that was slick and anyway this is a cool episode again man get with it alright peace out
I'm getting ready to do this with a 68 33. Plenty nervous
My first sailboat was a 1964 Pearson Triton, 29', fractional rig, but almost a twin of Carl Alberg's 30'. Man, was I ever green. It was embarrassing to be such a novice. I covered the rudder with cloth and polyester resin and within a year most of it had fallen off. Most Albergs and Pearsons still have the wood rudders.
There is a yard that allows you to work/stay on your boat in the yard about 400 yards from where ur slip is. Cerritos yaht Anchorage
Awesome 👍
The rudder on my Pearson wanderer looked about the same. I was all ready to make new but was advised to leave it. Lasted since the sixties. Fixing the thu-hulls is the best bang for the buck. The cut less bearing is another thing to replace.
The cutlass bearing is a whole episode of crazy and yes it gets replaced along with everything else in that system. Yeah a few days after being super freaked out about the rudder I remembered that ships were made out of wood for centuries and I was just being shortsighted
The cutlass bearing is a whole episode of crazy and yes it gets replaced along with everything else in that system. Yeah a few days after being super freaked out about the rudder I remembered that ships were made out of wood for centuries and I was just being shortsighted
Sailor James yep I was changing mine and cut a slit in the hull using a grinder like you are using. Didn’t notice it till I was buttoning up the seal and could see light.
i'm glad you dropped this video today! lookin forward to recreating it soon for Te Amo
Nice! Good luck on your haul out!
I just got a 1969 Alberg 30 that I'm restoring what are some things I should look for in the restoration? Mine is mostly solid, i need to repair my mast beam, but that's not too hard
Replace all the bronze fittings. If you plan on doing ocean sailing replace the tiller shaft and build a new rudder.
@@SailorJames Thank you so much for the tips!!
And of course the chainplates but those are a known issue
@@SailorJames Chainplate bolts have already been up sized! one of the first things i checked lol
Just spent 2 months in the yard. I feel your pain!
Right? So brutal
Right? So brutal
I liked you choice of music, Flight of the Valkyries, my Alberg is named Valkyrie.
It felt fitting with her flying out :)
Hi James , If you will be venturing into southern ocean, do you think it would be a good idea, once you build a new rudder and beef up rudder hardware to keep old rudder as spare? Be well !
If I replace the rudder with a glass and foam version I will have full faith in it. We don't plan on lingering in the southern ocean and dont have stowage space for a spare rudder. Our new windvane will be our emergency rudder.
That truck is as big as your boat!😁
and far worse on diesel :)
Hey James, Wagner's Ride of the Valkyries? How about Volga Boatmen instead?
Nice start to your project. I'm sure the boat is back in the water by now, but you mentioned you were going to sand the bottom. Did you guys think about having the hull soda blasted? it would save you a ton of time, not sure how expensive it would be for you boat. You guys are great, thanks for sharing your journey.
I wanted to take it down to gel coat but it was going to be VERY expensive and the yard requires you hire them for any sandblasting because of the environmental risks with the hold paint and dust and clean up, which is completely understandable. We will have it taken down to gel coat in a few years in South America.
@@SailorJames understandable. fair winds to you guys
Here on the great lakes a lot of props are sent to a prop shop to br re conditioned do you not have that there usually a lot cheaper than a new prop
our prop was so far gone that you could carve it with a pocket knife like cheese, it all worked out for the best in the end.
Ear plugs, ear plugs, ear plugs!!!!
You going to gain 3 knots:)
Huh? WHAT DID YOU SAY? :-)
That guy saying your rudder is OK. Better look up Teredo Worms! If theres a spot of bare wood they Will get in and won't take long to eat the rudder up! I had a warram cat and had to replace four layers of wood on the keel!
There are no soft spots and he has ran that yard for 30 years and is a wealth of knowledge. The rudder is completely sound.
OK.
Did you ever replace that wood rudder?
Nope
could a step drill bit of been used for this as well? thank you
Finding a yard where you can work isn't hard in the Netherlands. Where you can Weld and Grind is very difficult. Environment and neighboring boats are a big issue. I live on my 41ft steel ketch and keep it well painted.
Yeah steel boats must take constant care but I bet it’s nice to know how strong she is
I want to see the episode where you first bought the boat. Its no longer on line. Please talk about your engine.
All of the episodes are still online, here is the playlist of season one where I bought the boat and got her sailing ... ruclips.net/p/PLm0chdAnUTpxScTyiZIvnNE5Fz7edDkhU
Don't think your second lady been so above sea level.
8:33 Dang, shoulda-coulda-woulda. But, how could the foreman have known. Some advice is good, some isnt, only time will tell which is which.
Should have trusted my gut , but I still would have hit whatever I hit so who knows
@@SailorJames Its rad to go through your catalog and find little clips like this one. (and the most well known one from episode 1 where the Seller says "Hope you go around the world")
Thanks for all the videos and free knowledge.