Episode 278 Mounting Wilwood pedals in a 1967 Camaro

Поделиться
HTML-код
  • Опубликовано: 29 сен 2024
  • I mount bias adjustable Wilwood Pedals in the 1967 Camaro
    Pedal kit www.wilwood.co...
    Master Cylinders www.wilwood.co...

Комментарии • 11

  • @joelseptien5793
    @joelseptien5793 2 года назад +2

    This is incredible. I gotta get back to work but ima watch more soon lol great job man

  • @gsavage6688
    @gsavage6688 Год назад +1

    Hey Mark, Do these Wilwood pedals work with [fit in-between] an OEM width column? My OEM column = 2.45" at the widest point. Thanks!!

    • @MarkSawatsky
      @MarkSawatsky Год назад +1

      sorry for the delay. There is 3 inches between the Wilwood pedals so a stock column will fit but it's going to be tight

  • @Him_othy
    @Him_othy 7 месяцев назад +1

    Hey Mark, I know I am very late to the party but I just started my build. Was wondering how/ you decided to put the pedals where they are? Was there previous marking spots or did you just have an idea of where they go?

    • @SKIDMARKperformance
      @SKIDMARKperformance  7 месяцев назад +1

      I just placed them on either side of steering column, simple as that

    • @Him_othy
      @Him_othy 7 месяцев назад +1

      @@SKIDMARKperformance Thank you for the help. I will most likely be running manual brakes with this. Are you going the manual or power brake route for this build?

    • @MarkSawatsky
      @MarkSawatsky 7 месяцев назад +1

      @@Him_othy I am running manual brakes and have run the car on the track twice and had no problem getting it slowed down

    • @Him_othy
      @Him_othy 7 месяцев назад +1

      @@MarkSawatsky that makes sense. I have seen if you get the right stuff like bore size and pressure on a manual setup, it runs great and not as bad as some people make it out to be! Plus it gives you that more engaging drive. That is why I will be doing manual brakes with you!

  • @thewrightsgarage
    @thewrightsgarage 2 года назад +1

    Very nice, im sure she is going to stop on a dime.

  • @tiitsaul9036
    @tiitsaul9036 2 года назад +1

    Good progress. Although that firewall seems a bit flimsy for the purpose.

    • @MarkSawatsky
      @MarkSawatsky 2 года назад +1

      I added a brace to it and the metal is the same thickness I used on my race car, which has the same set up and works great