Yeah, he eas not born with these skills. Learn them. This is not his first rodeo. You learn all this while just doing stuff and if you are interested in this, you will learn. There is no fast way to it. Tools get to you over time. Here a bit, there a bit. Do not think about "oh i need a 3d printer to start and a few drilling machines" no. I started wirh building Dioramas and models a few years ago and started with the cheapest Stuff i could find. Watched hours of Videos because i was interested in it and started. Start somehow. Just somehow.
@@MrAhamed93can be, 1A/3A brushed motor speed controller Micro motor drive module Mini DIY bidirectional forward and reverse brushed ESC Simple ESC ( basic a chip because the ESP can not control the motor alone ).
Nice what size of motor do u use 🤔 I'm working on a hot wheel my self and the motor I order off of Amazon is either to big or way to small 🤔 any help would be greatly appreciated 😊 thanks for sharing 👍
Could you please say what are the parts he used to build I got to knw following components Esp32 c3 super mini - receiver Liner servo 1.8g Servo motor 2.5g Battery Esc micro - ? Details pls Circuit diagram pls.
@@MrAhamed93 u search how to convert 360 digri servo. And u get the answers and also in this channel u find the video too. And the diagram u see the code and then see which pin is defined. That was the pin out. I hope u understand it
Thanks for the response. I'm not an expert in circuits. But i wanna build the same. I under stand how to convert 360 degree servo but, how to Circuit the esp32 and motor, and battery. Pls explain In this circuits he didn't use motor drive rite?..
That's really, really cool. I'm jealous I don't have those kinds of skills
Learn them. Dont be jealos. Skills are just learned things. More you try better you get.....life
Yeah, he eas not born with these skills. Learn them. This is not his first rodeo. You learn all this while just doing stuff and if you are interested in this, you will learn.
There is no fast way to it.
Tools get to you over time. Here a bit, there a bit. Do not think about "oh i need a 3d printer to start and a few drilling machines" no. I started wirh building Dioramas and models a few years ago and started with the cheapest Stuff i could find. Watched hours of Videos because i was interested in it and started. Start somehow. Just somehow.
That's one most impressive custom Hot Wheels RC car wow very cool
How much for it?
Hey man, do you sell these kits to convert them?
thanks bro now I understand the diagram. We have 8 channel to make it 😊 the pin was given to your code
I have doubts -
What he soldring on the esp32 board .
That small board wher we can buy pls tell me the pcb name
Please explain
@@MrAhamed93can be, 1A/3A brushed motor speed controller Micro motor drive module Mini DIY bidirectional forward and reverse brushed ESC Simple ESC ( basic a chip because the ESP can not control the motor alone ).
Super Cool! I'd love to add lights!
Haloo, untuk bearing , kamu menggunakan ukuran berapa? Untuk bautnya juga ukuran berapa?
😳😳 impresionante!!! Felicitaciones.... 👏🏼👏🏼👏🏼👏🏼💪🏼
Ada kerja2 tertentu sewa je benda ni. Kalau yang ada siap dengan krew kerja lagi bagus.
Can we connect same bt module to your ap without programing. sir
Wonderful work!
Rc speed boat please 😢😊😊😊
Cool. Next time a Chev please
Impressive now lets see if you can convert a micro-machine into a RC
Can you explain how to make this or make a video tutorial how to install the script and anything needed for this installation
Why you stop realease new video😢😢😢😢😢
Amazing...serious skills here...i doubt anyone but you will do this or even attempt to..😊
cute Ford Ranger Raptor :3
bro your code is not compileing at all i even tried the tank code from your website pls could you provide a simplified version of your code
Hello friend, where can I find the schematic?
⚡👍 WOAH! Very keen. 🔥
the page does not work, I would like to do this project, which mobile app do I use? I would like to see the documents.
Nice what size of motor do u use 🤔 I'm working on a hot wheel my self and the motor I order off of Amazon is either to big or way to small 🤔 any help would be greatly appreciated 😊 thanks for sharing 👍
That was a coreless DC motor with gearbox
That's convert high speed into low speed. I hope you understand it😊
Nice work.
What's that first circuit board
excellent
Broo product kaha se by karna hai
I can not find the stl 😢
Thanks.
amazing
terimakasih telah berbagi
Hmmmm you impressed me 😎
Massive turn radius lmao
I want to buy this car
loveit!, No do it on the new 1:43 scale hotwheels Panthera, from the pullback speeder plssssssssssssssss
I bought the bluno board and it's so cool, but I burned my servo😅😅
Please provide 3d file link for this
Very cool!!
Ok ... awesome
I want one car sir
Where is the circuit diagram
Could you please say what are the parts he used to build
I got to knw following components
Esp32 c3 super mini - receiver
Liner servo 1.8g
Servo motor 2.5g
Battery
Esc micro - ? Details pls
Circuit diagram pls.
@@MrAhamed93 I knew that
@@MrAhamed93 OK wait
@@MrAhamed93 u search how to convert 360 digri servo. And u get the answers and also in this channel u find the video too. And the diagram u see the code and then see which pin is defined. That was the pin out. I hope u understand it
Thanks for the response.
I'm not an expert in circuits.
But i wanna build the same.
I under stand how to convert 360 degree servo but,
how to Circuit the esp32 and motor, and battery. Pls explain
In this circuits he didn't use motor drive rite?..
dear sir my request small bluetooth transmitter and receiver full connection and full video please 🙏🙏🙏
VERY cool..!
Como puedo tener un esta inpresinante
Pls share Circuit diagram
😮😮
Please send mi this car Please brother Please
Brother Please brother
I am from India 🇮🇳 ,maharashtra mumbai
Hay😅😅😅😅😅😅
I want this
First 💀
No one cares💀
😂😂😂