I only replaced the motor actuator assembly.the door latch assembly was ok.There are only used(kabli) motor actuator assemblies available in market .My guess it will be near 1000 PKR per piece.
hello! how to remove the mount for side mirror bro. where the casing and the 3 screws of the side mirror mount to. the one that sticks to the front door. thanks!
When the plastic door panel is removed look for two adjacent holes(approx 1" dia.) in the corner of door body at the back of mirror assembly.use 10mm socket with extension through these holes to remove three Nos. of nuts of the mirror assembly base.Un plug the three wire grip of the mirror assembly before removing the mirror assembly.The mirror holding cup is attached with base with three philip head screws.For this you have to remove the plastic cover from the base of mirror assembly.Hope this helps
Few years ago,I replaced my car motor actuator with qabli(used one and costed me 350 PKR)as the genuine/new motor actuator was not readily available with Honda dealer and it's estimated cost was at that time PKR 3500.usually people install pistol shaped motor actuator when the genuine fails.
Very useful. Thank you.
Total assembly rate
I only replaced the motor actuator assembly.the door latch assembly was ok.There are only used(kabli) motor actuator assemblies available in market .My guess it will be near 1000 PKR per piece.
Thanks
Can u show me how to remove the outer handle of this front door?
do you have a video on how to replace the Door Check?
Hi
hello! how to remove the mount for side mirror bro. where the casing and the 3 screws of the side mirror mount to. the one that sticks to the front door. thanks!
When the plastic door panel is removed look for two adjacent holes(approx 1" dia.) in the corner of door body at the back of mirror assembly.use 10mm socket with extension through these holes to remove three Nos. of nuts of the mirror assembly base.Un plug the three wire grip of the mirror assembly before removing the mirror assembly.The mirror holding cup is attached with base with three philip head screws.For this you have to remove the plastic cover from the base of mirror assembly.Hope this helps
eng morgan done! Thank you very much :) fixed the mirror mounting hehe. I discovered too that the 3, 10mm nuts that there were only 2. I wonder why
Hii
What is the front speaker size?
6 inches
@@250nashtech will 6.5 inch fit?
@@SasankDandumenu nope
Moter price
Few years ago,I replaced my car motor actuator with qabli(used one and costed me 350 PKR)as the genuine/new motor actuator was not readily available with Honda dealer and it's estimated cost was at that time PKR 3500.usually people install pistol shaped motor actuator when the genuine fails.
useless video....nothing to understand...make it from littel far bro..
Malum na pade to Q dekta he ....?
Very very useful video....👍