I've had those indexing ratchets for years I've used them for bell housing bolt's, brake caliper bolts and have saved me a lotta hours of work !!!! I would recommend them as a must have in any tool box. As for the fly zapper yes it will WAKE yo ass up and they do a good job at cooking up wasps, yellow jackets but DON'T swat them away ya gotta just touch them and watch the barbeque sparks 👍
That wrench is great when you’re working underneath a vehicle and you lock it in an angle so you can loosen up a transmission or don’t lock it at all and it loosens the Titans faster or normal wrench when you cannot use electric
The indexable ratchet is killer when you run into the tight spots it's designed for. When you have a spot with little to no room for a handle to ratchet you pull that thing out. Get it on the bolt and break it free then unlock the handle and basically push in and out to turn the fastener.
Also that ratchet is great for push and pull speed handle type motion. Kinda like a saw. But also for like getting an oxygen sensor around an exhaust pipe when you don’t have enough room. I have the 3/8” but j hate the coarse teeth, I think the 3/8” guys of the multi flex ratchet which is another weird ratchet, would swap out in the 3/8” so you can get 72 teeth, Oh and do it
I just bought the ratchet with the swivel head that you can use like a nut driver. Man I can't wait to give it a spin. Great video men. I'll be getting me a key chain directly. I also got the icon pistol grip needle nosed pliers. Those are great. I been trying to set my boy up. He's a senior he's a senior Vocational highschool automotive repair technician. He landed a terrific co-op job as a mechanic. He had some Hodge podge of tools. I been setting him up a week at a time using HFT sales and membership to the best advantage I could. I enjoy your videos and it's content and love the show of faith in the Lord. Amen
i could have used the indexable ratchet last night. removing a timing chain cover in an acadia in the vehicle. i had very limited room and had to use box end wrenches due to swing space. i think this would have worked. P.S. dont do it
Cool. The offset ratchet can help to reach around obstructions. You can just pull and push the handle to operate ratchet if there is no room to swing the handle. I wish the offset was about 1/2" longer for the 3/8" drive unit.
I have that ratchet you would be amazed how useful it is. Quinn needle nose gives a better site line. The only one I don't have is the 1/4" extension but I will get one next time I go. Thanks guys.
I use the pistol grip pliers all the time. They are good for hose clamps and taking out fuses. The only thing is it started rusting really fast so keep clean in a dry place
It’s not weird, if it works!! You have a complicated life with that many keys! I’m glad you showed that ratchet, I’ll get one tomorrow, I’ve got a drain on a lawnmower that is a pain in the butt to open, that will work, and, I won’t say dirty words doing it! Do it!
The two of you are so funny and entertaining and informative. Here in Louisiana mosquitoes can have West Nile virus. A coworker got the virus and never came back to work. The small knife is good for light plastic and paper. Cut card board and theY start breaking. The best razor knife is the scharade one that has a screw to hold the blade in. Cannot see a use for the big ratchet. See you guys soon I hope.
have the 1/4 extension for my go bag/travel, because it dont take up a large foot print. As wall as the 3/8 telescoping extension from quinn, two of the best travel items to throw in your bag. That pittsburg ratchet came in klutch on bell housing bolts... its the only thing i have personally ever found a use for it, but the two times i needed for that reason was well worth the price tag & not to forget lfetme warranty. Great video guys Kudos for what you stand for God Bless, P.S. Always Super Glad to Hear Jims Fired Up!!
Thanks for the gift ideas, for myself mostly but the extendo 1/4 driver will make a good one for my brother at least. Video was entertaining and fun keep it up!
Love what you guys are doing and your videos. On your recommendation, I bought the Quinn garage scissors. So far I haven’t been disappointed, curious to see how they do cutting out the backbone of my turkey when I spatchcock it on Thanksgiving.
Those look like some great stocking stuffer tool ideas. I love your channel.... Thanks guys....and in case you don't release a video next week... 🦃 Happy Thanksgiving. 🦃
Everybody is totally missing how you actually use that ratchet. You do not normally lock the ratchet head when you are using it for its special purpose. You push and pull the handle back and forth in a tight area and it causes the ratchet head to move backwards and forwards and tighten or loosen the bolt without any side to side motion at all. It will allow at least 90° rotation in a very tight area that you could normally only get maybe 10° out of. Please try it and make a video showing how you should actually use it. It can be one of the most useful tools in your toolbox when you need it!
I literally came up with the idea to make an electric fly swatter / zapper many years ago. I guess that's what happens when you don't follow through with your ideas.
1st. the rustang couldnt even smoke the tires. 2nd .. the racet is a good thing. i like it. get around a panhard bar or something udner the car.. i like it
The Pittsburgh driver that came with my 300 piece set already has the handle stripped out and needs to be warrantied. I would worry about the telescoping driver stripping the handle and the ratcheting mechanism stripping out.
That electric bug racket is a iconic old school Harbor Freight'r. If you find one that had one of the giant remote controls that's an even older school. Oh Yeah: No DON'T DO IT! take it from an old school Freight'r friends don't let friends out there tongue on the Harbor Freight racket unless they are willing to do it too.
Jim im gonna comment about bug zapper, as much as i wanna see it! I dont recommend doing that my friend! i mean you gotta eat,kiss your wife, so many things you would be suffering from! But who am i to crush DREAMS... DO IT! maybe say a ilttle prayer ahead of time. thanks guys!
The close-up of the Quinn "dog Head" pliers looks like inferior workmanship. The castings are very pitted. I'll have to see it in the store to see if they are all that way, or if you just got a bad one.
Just ordered a keychain! I appreciate you guys. Thank you!
I've had those indexing ratchets for years I've used them for bell housing bolt's, brake caliper bolts and have saved me a lotta hours of work !!!! I would recommend them as a must have in any tool box.
As for the fly zapper yes it will WAKE yo ass up and they do a good job at cooking up wasps, yellow jackets but DON'T swat them away ya gotta just touch them and watch the barbeque sparks 👍
Snap On has the same Ratchet. Super useful in tight spots and low flex spaces. Love your videos!
Thanks friend
Oh please don't say it's the same as snap on. You're going to get people upset.
Oh no @@dangrimes5078
That wrench is great when you’re working underneath a vehicle and you lock it in an angle so you can loosen up a transmission or don’t lock it at all and it loosens the Titans faster or normal wrench when you cannot use electric
Thanks
We need more people like you guys , TO HELP THE NEEDY
GOD BLESS
Thanks friend
The indexable ratchet is killer when you run into the tight spots it's designed for. When you have a spot with little to no room for a handle to ratchet you pull that thing out. Get it on the bolt and break it free then unlock the handle and basically push in and out to turn the fastener.
Thanks friend
I have seen similar items used this way in other videos
Also that ratchet is great for push and pull speed handle type motion. Kinda like a saw. But also for like getting an oxygen sensor around an exhaust pipe when you don’t have enough room. I have the 3/8” but j hate the coarse teeth, I think the 3/8” guys of the multi flex ratchet which is another weird ratchet, would swap out in the 3/8” so you can get 72 teeth,
Oh and do it
I just bought the ratchet with the swivel head that you can use like a nut driver. Man I can't wait to give it a spin. Great video men. I'll be getting me a key chain directly. I also got the icon pistol grip needle nosed pliers. Those are great. I been trying to set my boy up. He's a senior he's a senior Vocational highschool automotive repair technician. He landed a terrific co-op job as a mechanic. He had some Hodge podge of tools. I been setting him up a week at a time using HFT sales and membership to the best advantage I could. I enjoy your videos and it's content and love the show of faith in the Lord. Amen
Thanks friend
Nice job!
Thanks
Push it back and forth . If you don’t have room for normal ratchet motion.
I like the indexing ratchet..mainly just to have in the collection...might need it one time in my life. Tools are fun. Dream big.
Thanks friend
I have them Pistol grip needle nose had mine since they came out I myself love them my go to.
Did yours get rusty? Mine did and I didn't leave them wet or anything...
i could have used the indexable ratchet last night. removing a timing chain cover in an acadia in the vehicle. i had very limited room and had to use box end wrenches due to swing space. i think this would have worked.
P.S. dont do it
Cool. The offset ratchet can help to reach around obstructions. You can just pull and push the handle to operate ratchet if there is no room to swing the handle. I wish the offset was about 1/2" longer for the 3/8" drive unit.
Thanks
I have that ratchet you would be amazed how useful it is. Quinn needle nose gives a better site line. The only one I don't have is the 1/4" extension but I will get one next time I go. Thanks guys.
Thanks
I use the pistol grip pliers all the time. They are good for hose clamps and taking out fuses. The only thing is it started rusting really fast so keep clean in a dry place
Thanks
Best channel there is!! I love you guys and look forward to every video. Thank you and keep it up!! Dream Big!!
Thanks friend
I have that rachet. very useful. I have beat the crap out of mine and have not been able to break it. A strange rachet, snap n makes one just like it.
Thanks for watching
I bought 2 Pink Knives and 1 pinkTape Measure
It’s not weird, if it works!! You have a complicated life with that many keys! I’m glad you showed that ratchet, I’ll get one tomorrow, I’ve got a drain on a lawnmower that is a pain in the butt to open, that will work, and, I won’t say dirty words doing it! Do it!
Thanks for watching
That ratchet has saved my ass so many times I went out and bought the snapon version
How is it
Then I bought 2 of each Knife as Stocking Stuffers.
The two of you are so funny and entertaining and informative. Here in Louisiana mosquitoes can have West Nile virus. A coworker got the virus and never came back to work. The small knife is good for light plastic and paper. Cut card board and theY start breaking. The best razor knife is the scharade one that has a screw to hold the blade in. Cannot see a use for the big ratchet. See you guys soon I hope.
You need one of those bug zappers
have the 1/4 extension for my go bag/travel, because it dont take up a large foot print. As wall as the 3/8 telescoping extension from quinn, two of the best travel items to throw in your bag. That pittsburg ratchet came in klutch on bell housing bolts... its the only thing i have personally ever found a use for it, but the two times i needed for that reason was well worth the price tag & not to forget lfetme warranty. Great video guys Kudos for what you stand for God Bless, P.S. Always Super Glad to Hear Jims Fired Up!!
Thanks friend
Love the channel and what y’all are doing with the Dream Big movement! Those Quinn shop shears are the truth!!
Thanks friend
That Pittsburgh bit drivers cones in real handy i enjoy using it when I need to
Thanks
Thanks for the gift ideas, for myself mostly but the extendo 1/4 driver will make a good one for my brother at least. Video was entertaining and fun keep it up!
Thanks
The pistol grips are great; they work great when reaching for an item e.g. atc fuse, sorting small parts or any task needle nose are put into service.
Thanks for watching friend
I have the pistol grip needle nose pliers at work and home.They are really great pliers.
Thanks friend
Love what you guys are doing and your videos. On your recommendation, I bought the Quinn garage scissors. So far I haven’t been disappointed, curious to see how they do cutting out the backbone of my turkey when I spatchcock it on Thanksgiving.
Let me know if it works
Those look like some great stocking stuffer tool ideas. I love your channel.... Thanks guys....and in case you don't release a video next week... 🦃 Happy Thanksgiving. 🦃
Thanks for watching
Pliers work great for pulling nails and screws out of tractor trailer tires .
Thanks for watching friend
You folks deserve a million subscribers.
Good, wholesome fun and entertaining.
Please do a video of you swatting wasps with that racket...
Thank you so much friend
DO IT! DO IT! DO IT! DO IT! DO IT! DO IT! DO IT!
Everybody is totally missing how you actually use that ratchet. You do not normally lock the ratchet head when you are using it for its special purpose. You push and pull the handle back and forth in a tight area and it causes the ratchet head to move backwards and forwards and tighten or loosen the bolt without any side to side motion at all. It will allow at least 90° rotation in a very tight area that you could normally only get maybe 10° out of. Please try it and make a video showing how you should actually use it. It can be one of the most useful tools in your toolbox when you need it!
Thanks friend
I literally came up with the idea to make an electric fly swatter / zapper many years ago.
I guess that's what happens when you don't follow through with your ideas.
Thanks for watching
The rachet i like to use as a speed wrench
Thanks
against my better judgment....DO IT! God Bless
Lol
You guys sure are having fun! :) oh yeah.... DO IT !!
Do ittttttt!!!!!!
Great video
Thanks
Great picks
Thanks
Do it!!! 😊
DO IT!!!!
1st. the rustang couldnt even smoke the tires. 2nd .. the racet is a good thing. i like it. get around a panhard bar or something udner the car.. i like it
Thanks for watching
Pittsburgh should've made that ratchet in a 1/4" to be the right budget alternative to the Snap-on version.
That would be awesome
@jimprice8557 one the main purposes of that style ratchet is to replicate using a speed handle.
I grabbed the 3/8 and put a crush washer in there and it works great
The rachet allows getting around obstructions and saved me many times.
Thanks for watching
The Pittsburgh driver that came with my 300 piece set already has the handle stripped out and needs to be warrantied.
I would worry about the telescoping driver stripping the handle and the ratcheting mechanism stripping out.
Thanks friend
As far as I know its so you can do like a push/pull motion in tight side to side places
Thanks friend
If you want to support good people, this is the place!
Thanks friend
The ratchet is use in a push / pull motion in tight spaces
Thanks friend
Indexable ratchets can save you hours of time and agrivation
Thanks
Do it just do it .
Lol
They have a 3/8 ratchet to I have used it before to come around back side
Thanks friend
I keep that mini utility knife in the sunglasses holder in my 4Runner
That’s a great idea
The bug zapper does give a pretty good zap
I hope I don’t have to find out
That bug zapper has a pretty good pop, and NO I didn’t read that somewhere. 😅
I hope I don’t get a thousand comments of do it lol
U should get the mini Home Depot bucket
He wants one
I just picked up the ratchet in your thumbnail
Let me know how you like it
@@jimprice8557 I've not used it yet, but I'm guessing when the need arises it will come in handy
@@TheProCut17 yes it will
That electric bug racket is a iconic old school Harbor Freight'r. If you find one that had one of the giant remote controls that's an even older school.
Oh Yeah: No DON'T DO IT! take it from an old school Freight'r friends don't let friends out there tongue on the Harbor Freight racket unless they are willing to do it too.
Thanks friend
Cool stuff
Thanks friend
Did you get the Pink Kobalt Tool
No but we seen it
The electric fly swatter has been out for years. You let whatever land on it and push the button.
I’ll have to give it a try lol
That ratchet is a gimmick until you find a fastener that is impossible to reach with a normal ratchet. :)
Thanks friend
I believe you could use that ratchet removing a fan blade assembly, and remove a water pump too . Do it.
Thanks
Let's get fired up and Do it!
6 position nut driving.😊
Hard to get in spots.
Do it again!
No!!!!! Lol
That flyswatter is going to get you an AZZ-WHOOPIN' from your wife...
(11:00 minutes in)
DO IT!!
Lol
It's going to hurt but do it!
Help me lol
DO IT!!!!!
Nope, cowbell.
Do it (2)
Do It!!!
DO IT!
Do it!!!!!
Lol
Do it if you want to be careful it can make you sick
Jim im gonna comment about bug zapper, as much as i wanna see it! I dont recommend doing that my friend! i mean you gotta eat,kiss your wife, so many things you would be suffering from! But who am i to crush DREAMS... DO IT! maybe say a ilttle prayer ahead of time. thanks guys!
lol thanks friend
Do it !!
Lol
That rachet good for going around things. It's very nice. Don't do it
Thanks friend
@jimprice8557 no your welcome
One more time - Do it!
Lol
Do it😊
U can do it
Lol
Don't...
Do it!!!
Thanks lol
Do It!
Do it!😂
The close-up of the Quinn "dog Head" pliers looks like inferior workmanship. The castings are very pitted. I'll have to see it in the store to see if they are all that way, or if you just got a bad one.
Do it!
Lol
Do it x 999
Dooooo it!!!!!!
Thanks lol
Do It.
Pretty sure I was the first.
Thanks
do it
Lol
DO IT !!!!!!! LOLLLL
Lol
Do it
Lol
Do it.
Lol
Do it!!! XD
Lol
Don't do it 😂😂
Thanks you’re a true friend
Do it lick the zapper!
Lol