Cub Cadet Riding Mower Enduro XT2 Won't Start / Won't Stay Running 679cc EFI Fuel Injected 9Q78HUA
HTML-код
- Опубликовано: 30 янв 2024
- Thank you for watching!! If we helped you out and you want to show your support - LIKE, SUBSCRIBE or give us a shout out below. If you saw something you didn't like leave your comment below as well, these things help us get better!
To see our recommended tools and products visit our Amazon shop at www.amazon.com/shop/individua...
We diagnose and repair starting issues on this Cub Cadet Enduro XT2 XLX50 riding mower that keeps shutting off, won't start, won't stay running or intermittently starting.
When the customer brought in the mower the mower would not start at first but eventually fired up.
We check it out and resolve the problems while giving other troubleshooting tips depending on what your issue is
We go over full diagnostics, troubleshooting and repair to show common issues and tips to get your EFI electronic fuel injected mower back into good working order
In this video we resolving the infuriating fuel injection issues plaguing your beloved Cub Cadet XT2, LX42 or LX46 Riding Mower!
Watch as we dive deep into this mower and provide you with a step-by-step guide to conquer this nagging problem once and for all.
This video was done on a:
Cub Cadet Enduro XT-2 Enduro XLX50 Model 13AZA2CQ010 Riding Mower
MTD 9Q78HUA 679cc EFI Engine
This model is the same engine as many others such as 13AZA1CN010 / 13BPA1CS010
RZT SX XT2 42 46 50 SLX50 LX46 FAB
We show how to test the EFI system, how to test the spark, how to check the electrical and what to check for these engines so they run well and will start every time
We show how to check out the fuel system, how to remove and check the injectors out, how to inspect the electrical system and how to make sure the ignition is working.
If your throttle body or "fuel sprayer" is bad you can order part number 951-05310A at amzn.to/3ueoii0
If your spark plugs are bad, you can order part number NGK BPR6ES at amzn.to/3UnGel4
If you need the oil filter you can purchase part number 951-12690 at amzn.to/3u6ineZ
To replace the air filter you can purchase part number 937-05075 at amzn.to/48ScT6s
No spark on ignition coil part number 951-15387 it can be purchased at amzn.to/3vYEpki
If your ignition switch is bad part number 925-06427A can be purchased at amzn.to/3vYF9pA
The customer ended up saying the dealership told him the "fuel sprayer" is what needed replaced.
This is the same dealer we see things from consistently misdiagnosed.
How much would they have charged him on top of that for repairing the electrical after it was replaced?
Tools:
Spark plug wrench 21mm can be purchased at amzn.to/49hv0CM
Spark Check'r
Amp / volt meter can be purchased at amzn.to/3ugVJAs
Video equipment:
GoPro Hero 10 ( amzn.to/3O4LFkQ )
GoPro Hero 11 ( amzn.to/48rIcVz )
Like and subscribe to see more helpful videos like this one! Save some money by doing it yourself!
#cubcadet #smallenginerepair #individualizedrepair #smallbusiness #diymaintenance
About Us:
My name is Martin. I have been repairing tools and small engines for almost 20 years. We operate a small engine repair shop in Illinois. We service / repair Briggs & Stratton, Kohler, Kawasaki, John Deere, Cub Cadet, Toro Tecumseh, Loncin, Honda, Craftsman, Husqvarna, MTD, Troy Bilt, Simplicity, John Deere, Exmark, LCT, Generac and many more brands. We work on riding mowers, walk behind mowers, snow blowers, zero turns, generators, pressure washers and much more. We normally repair about 3,000 pieces of equipment every year and look at many more that are beyond an affordable repair. Hopefully our videos will save you some money and give you the information you need to work on your own equipment or figure out the issue at hand.
Disclaimer: Links included in the description are affiliate links. As an Amazon associate we earn from qualifying purchases. There will be no additional charge to you for purchasing here. We appreciate your support, which allows us to continue to provide original content!
Please be careful when repairing any piece of equipment and follow all possible safety measures. This video is for entertainment purposes only. 
Хобби
Ground was my issue too on a Cub Cadet RZT SX... Thanks for the tips
Awesome! Glad to help!
I’m glad that it wasn’t the ECM. If I bought an EFI equipped mower it wouldn’t be this one or any other MTD brands. If I did it would be a Kawi but that’s a big “if”. At least someone is taking care of it. I can’t imagine what an ECM would cost for this mower or if it’s even available.
The Kawasakis really are nice but with all the electronics I don't think these engines belong on lawn equipment at all. I have seen several with varying issues and they are only a few years old with very low hours. The last one I did had a burnt wire at the engine connection that needed repaired. The wiring really is a pain to find issues with if it is an intermittent issue. Thanks for watching!
A lot of great information. I like how you check the basic things first. I like switching out battery hardware. 1/4-20 3/4 long sst with washers on both sides. Won’t dig into posts and won’t corrode.
Exactly what I do in most cases, normally I don't even bother saving the old bolts if I take them off. These bolt/nut pairs they put on seem to work pretty well and were in good shape so I left them instead. Thanks for watching!
Nice Easy one. I'm enjoying the vids 👍
Thanks for watching! I appreciate that! Next one is anything but that. Was supposed to be Tuesdays videos will probably be next week before it is done!
The heat in West Texas has been hell on the efi system and it can’t take the heat, after a hour your done for the day and pray it starts again or you out big bucks 😢😢😢
Interesting! I haven't heard anything about this but am interested what is going on? They not tuned right for high heat situations getting too much fuel or what?
Thanks, work on these, when lucky, usually they are a lot older models, at a dealership up in the cold north, Canada. Wish they were all that simple and just shows sometime it can be an easy fix, you just have to know where to look. Tried finding your spark checker online, but it seems to be sold out everywhere.
Yeah, figured this would be a ton of tracing down but found it pretty quick for the type of issue it was. The problem comes when you can't get it to act up and don't really know what's not working when it will turn over but won't start. Thanks for watching!
www.rcpw.com/trillium-spc-7200-spark-checkr-engine-spark-tester-ignition-analyzer-for-small-engines-motorcycles-and-more/ looks like they have them in stock
I have ordered from here before right after they started making them again with no issues
Contacted the manufacturer and they gave me a supplier who ships to Canada, ordered, a little pricey, but will be very useful, Thanks.
Well worth every penny. I paid an unreasonable amount (around $120 each from Australia if I remember right) for a couple of them when they stopped making them under the previous name years ago. You do not know what you lost till it is gone! Thanks for watching!
Enjoy your videos. very informative
I appreciate that! Thanks for watching!
If only all of the jobs that come into the shop could be this easy. 🥴🥴🥴🥴🥴🥴🥴🤷🏿♂️😳
Just have to know where to start I suppose. I was thinking bad connection but definitely not that one! Thanks for watching!
Good video. Good information. Lucky bugger with only a bad ground :)
Haha! Next one is supposed to be Tuesdays video will probably be next week before it is done! Thanks for watching!
I checked battery first and then jumper cables from ground on battery to the engine block
It’s a fast find on bad ground on frame or loss engine to frame 😊
It sure is a good way, I normally don't have any in my area so I do it a little different but that or hooking between ground and battery negative with voltage drop method. Thanks for watching!
Before going thru the trouble of taking the battery out or tracking down the ground cable, just connect a jumper cable fron the battery post to the engine block. That way you know if it's the ground connection.
Good tips there! I always like to check all the connections under the battery anyway. Many times we use a meter to test most of it. Thanks for watching!
Hello, I enjoy your videos very much. You do an excellent job on them, thank you.
I viewed your tool list looking for the spark tester that you use but didn’t see it listed. Which one do you use? Please keep up the good work.
I appreciate that! Spark Check'r spc-7200 shows in stock at www.rcpw.com/trillium-spc-7200-spark-checkr-engine-spark-tester-ignition-analyzer-for-small-engines-motorcycles-and-more/
On these fuel injected models do you know if there is a scan tool available for purchase? I beleive it hooks up to the Throttle body itself as that's where the Ecm lives. Also have you had any issues with these Push button starts Not shutting off a running engine?
Thanks for the videos on the Efi units. Not much out there.
I have been looking for answers for you but have found nothing. I am not sure about this. I have seen multiple switch issues, including not shutting off without pushing multiple times
Do you think the EFI would eliminate most the ethanol fuel issues ?
It does eliminate most ethanol issues with gum or varnish and quality of fuel does not make as much of an impact since it is finely sprayed (injected). Thanks for watching!
Once we get use to it I think it’s a good deal with proper maintenance 😊
Any chance you could share the torque specs for the cylinder head for this motor? I can't seem to find any specs online...
Not sure on this one! I have a message out to our rep for a service manual
@@IndRepair Many thanks! Lots of info available for all the other engines CC has used, but not their own branded one.
I still have no answers! I am not sure one exists at this point...I will keep you posted, reached out to a couple more sources, ugh!!
to bad they arnt all that easy
I know! Thought we were going to be in for some electrical searching. Thanks for watching!