That is a great improvement specially where you live where there are rural and isolated areas with limited or no illumination ! More light is good anywhere. Regular beams are yellowish in color and dim compared to the led that you just installed !🇵🇷
Te considero un hermano no t imaginas cuantas veces m as ayudado con mis projectos tengo la misma motora sigo viendo tus videos por favor no pares gracias aqui un hermano n Puerto Rico
Wow Janer, no sabes lo que significa este mensaje. La gente es tan negativa que en muchas ocasiones he estado apunto de abandonar la cuenta pero comentarios como este me dan animos de seguir. Voy a estar en Puerto Rico pronto! Gracias - enviame un email a tomodornottomod@gmail.com
@@ToModorNottoMod the thing that troubles me is that the headlight and lightbulb are loosing the seal and also the cooling of the heat dissipation of the bulb 💡 🤔
About the heat dissipation I will tell you later can comment yet but I wouldn't too concerned but I hear you. About the seal, everything went back the same way it was before the difference is that the plug is no longer in the housing besides the the rimubber and the locking ring fitme is the same as OEM.
Hey man love the videos ! I just bought a 2018 gsxs 1000 2 months ago and it has a after market exhaust that kicks The O2 sensor its changed since its an aftermarket mid pipe. What can I do to not trip that sensor? And does that effect anything in a negative way ? Thanks
Thanks for the feedback. Two things can be happening, the first could be that the new mid pipe does not accomodate the exhaust servo and the servo was eliminated, that would case a CEL and secondly is the O2 sensor itself, is it still connected? Ideally you would like to reflash the ECU or install a Power Commander because if you don't have a catalytic the bike's fuel will be on leaner side and these bikes from factory were pretty lean already. Also you want to see what is the CEL or check engine code you have on ghe dashboard. I can send you a list so you know what codes do you have.
Hey man, hope you are doing well. Of course, The link below has a RAM ball for gas tank for BMWs and Kawasaki. The funny thing is that one of the pictures is clearly on a Suzuki, don't know the model but it's a Suzuki. I might want to try it..... I think I can make it work. www.revzilla.com/motorcycle/ram-mounts-gas-tank-mount-bmw-kawasaki?sku_id=1215602&srsltid=AYJSbAdMWEoBCtTXrZ-Fw0c3Ei7S7DP5OatsxXzd95Dgu8rKKLMNKQe8f4s Ill buy it and i will tell you if it works 😉
So far so good. I did get some blinking during launch control. I have not checked to see if there is any loose connection, but since I only need one and my box came with 2 I will swap it out. In your case you need 2 as long as you choose 2 LED compatible with H7 you should be fine. Let me know if I did nor answer your question.
That is a great improvement specially where you live where there are rural and isolated areas with limited or no illumination ! More light is good anywhere. Regular beams are yellowish in color and dim compared to the led that you just installed !🇵🇷
Thank you buddy for showing us how to change the stock headlights to LED lights. I'll follow your tips.
I'm glad I was able to help!
thank you for the video. gsxs100.. ummm yumyum. 2016 models but in red...
Te considero un hermano no t imaginas cuantas veces m as ayudado con mis projectos tengo la misma motora sigo viendo tus videos por favor no pares gracias aqui un hermano n Puerto Rico
Wow Janer, no sabes lo que significa este mensaje. La gente es tan negativa que en muchas ocasiones he estado apunto de abandonar la cuenta pero comentarios como este me dan animos de seguir.
Voy a estar en Puerto Rico pronto!
Gracias - enviame un email a tomodornottomod@gmail.com
Thanks for your help buddy! Noticed Amazon sells single bulb as well for a few dollars less
What! Really how come I did not see it 😕. Thanks for letting me know! I will add it to my description so people know that's an option too. Thanks Chad
Great mod Mate !
Thank you sir!
As usual amazing videos from you bro thank you 😊 so much
Thank you Emil. Glad you liked it
@@ToModorNottoMod the thing that troubles me is that the headlight and lightbulb are loosing the seal and also the cooling of the heat dissipation of the bulb 💡 🤔
About the heat dissipation I will tell you later can comment yet but I wouldn't too concerned but I hear you. About the seal, everything went back the same way it was before the difference is that the plug is no longer in the housing besides the the rimubber and the locking ring fitme is the same as OEM.
@@ToModorNottoMod will do this mod in spring thank you 🙏
Always.
Looks great!!
Thank you Damion! We have to go riding one of these days!
Thanks for the video bro. This is something I definitely want to do. Have had the long term use of the light been?
So far so good everything still working great after 5 months.
Hey man love the videos ! I just bought a 2018 gsxs 1000 2 months ago and it has a after market exhaust that kicks The O2 sensor its changed since its an aftermarket mid pipe. What can I do to not trip that sensor? And does that effect anything in a negative way ? Thanks
Thanks for the feedback.
Two things can be happening, the first could be that the new mid pipe does not accomodate the exhaust servo and the servo was eliminated, that would case a CEL and secondly is the O2 sensor itself, is it still connected?
Ideally you would like to reflash the ECU or install a Power Commander because if you don't have a catalytic the bike's fuel will be on leaner side and these bikes from factory were pretty lean already.
Also you want to see what is the CEL or check engine code you have on ghe dashboard. I can send you a list so you know what codes do you have.
See codes here
C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR
C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIPOVER SENSOR
C24 - IGNIT]ON SIGNAL #]
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR
C29 - SECONDARY THROTTLE POSITION SENSOR
C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #]
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL
C46 - EXHAUST CONT'ROL VALVE ACTUATOR (I 000
ONLY)
hey bro, do you know anything about a tank mount, like RAM ball, for this bike?
Hey man, hope you are doing well. Of course,
The link below has a RAM ball for gas tank for BMWs and Kawasaki.
The funny thing is that one of the pictures is clearly on a Suzuki, don't know the model but it's a Suzuki. I might want to try it.....
I think I can make it work.
www.revzilla.com/motorcycle/ram-mounts-gas-tank-mount-bmw-kawasaki?sku_id=1215602&srsltid=AYJSbAdMWEoBCtTXrZ-Fw0c3Ei7S7DP5OatsxXzd95Dgu8rKKLMNKQe8f4s
Ill buy it and i will tell you if it works 😉
What is the verdict on the LED headlights you installed? I am looking to install LED headlights in my GXS 1000 F.
So far so good. I did get some blinking during launch control. I have not checked to see if there is any loose connection, but since I only need one and my box came with 2 I will swap it out.
In your case you need 2 as long as you choose 2 LED compatible with H7 you should be fine. Let me know if I did nor answer your question.
He's going to go ahead and.
Problem is, now the connector is outside in the elements.
Hey man, you can cover it, maybe some dialetic grease or water proof it and you should be fine. 🙂
Oversized heat shrink fixes that. Cheap and easy to do and easily replaceable if you need it unplugged for some reason.
@@hstefan good point
@@hstefan hmmmm i like that. Good idea